In real time: 12:24 pm sept 4,2024 I just disconnected the battery to replace spark plugs and coils and wires and low idle upon starting the car and I looked on KZbin and thank goodness I found you!!!!!!!
@THEMANCAVE20232 күн бұрын
Hey maria and or family I am so happy this help you out
@reflexboxer2ndlt8072 күн бұрын
You know you don’t have to put your palm over the barrel to rack the slide back from the front right?
@THEMANCAVE20232 күн бұрын
Yes sir
@cursed.59522 күн бұрын
Does anyone know how to reset with manual transmission? I can’t find anything, I have low 500rpm on idle after battery change.
@THEMANCAVE20232 күн бұрын
Try driving.it with ac on for 30-50 miles should reset
@cursed.59522 күн бұрын
Update: I cleaned my throttle body, I also cleaned MAF sensor. Then I tried to do the reset, I just kept it in neutral the whole time. And fair enough the rpms settled nicely at ~850. Thank you for the vid
@JillRamelot3 күн бұрын
I replaced the alternator and the idle was really lo, like 500 or below, stalling sometimes at stop signs. After using this magic fix, it added about 300 RPMs to the idle speed, enough for it to run smoothly when stopped in drive and in park. Thank you SO MUCH for making this video, it was a lifesaver!🙂
@THEMANCAVE20232 күн бұрын
So happy it helped you out
@HumaneHumans7 күн бұрын
works for 2006 as well I had to do it 2x but now it's a 500rpm idle in drive with the e brake.. thank you
@THEMANCAVE20237 күн бұрын
Most welcome glad it helped.you out
@Smoove_groove_Tv9 күн бұрын
I’m doing it now I believe it’ll work based on these reviews
@THEMANCAVE20239 күн бұрын
Works.great thanks
@djhogan939910 күн бұрын
My 9mm g2c has been a good gun, I have been considering getting a g2c in 40 S&W
@THEMANCAVE20239 күн бұрын
The 40 is nice as well
@sarahtrevelline228813 күн бұрын
Sooo.. what's the truth about Carnival Freedom..?.🤔...didn't see any review of any restaurant, bar, anything..
@THEMANCAVE202312 күн бұрын
Enjoyed it as much if not more.than madigras
@tommyaudio16 күн бұрын
curious if we should do this with a hybrid, a push to start hybrid, at that
@THEMANCAVE202312 күн бұрын
Don't know how to advise with that. Generally your on battery just starting
@jibrimuhammad22 күн бұрын
Wow this video was a lifesaver!!!!
@THEMANCAVE202322 күн бұрын
Thanks for letting me. Know
@advancedtv111023 күн бұрын
You are a life saver buddy. Thank you. I love KZbin University. . It works like a charm.
@THEMANCAVE202322 күн бұрын
Most welcome
@sherifali882423 күн бұрын
How to door autolock shifter for Camry 2009? Do you have any idea? Thanks
@THEMANCAVE202322 күн бұрын
I'm sorry I don't mean to come off rude. Can you please rephrase your question it's broken/ incomplete English
@user-dt4ol8ps6hАй бұрын
i thought the glock 26 came with an extended base plate
@THEMANCAVE2023Ай бұрын
Seen it with and without
@cswaggАй бұрын
Love somebody who doesn't get free filament from the corporations. I got red, blue, green, and yellow in the PETG HF, Depending on how it goes, I might be replacing ABS (basic). I'm on a 24 hour print right now, so time will only tell!
@THEMANCAVE2023Ай бұрын
nope all colors as refills cost me Subtotal $139.93 Discount ([Filament Discount: -$5.00x7]) -$35.00 Shipping (Standard) $0.00 Tax (NC STATE TAX 4.75%) $4.97 Tax (NC COUNTY TAX 2.0%) $2.10 Total $112.00
@THEMANCAVE2023Ай бұрын
there are some cool vids coming. and please rest assured while i love free stuff my opinion will not be purchased. I am new at this and i want transparency
@cswaggАй бұрын
@@THEMANCAVE2023 I'm new to 3D printing, but learning pretty fast. Maybe I can learn a thing or 2 from you if you're down and have the time some day?
@cyndejayden4666Ай бұрын
Looks so awesome!❤
@THEMANCAVE2023Ай бұрын
It is!
@luismuniz8607Ай бұрын
How did you get it to auto dimming? Mine won’t
@THEMANCAVE2023Ай бұрын
The wiring changed In my car I had to call Kenwood support they found.me.the correct diagram
@Johnson12678Ай бұрын
😂 That got to be a lab w you in the background. Just the way he's breathing.
@THEMANCAVE2023Ай бұрын
My crazy pit bull lab mix
@LeviGagnon-l8iАй бұрын
Seriously, thank you. This is awesome! Definitely a life saver. Swapped out the alternator on my 2007 Camry and had no idea how to make it re-learn the idle until I came across your video. Thanks for saving me some stress and money. Just followed your steps so hopefully it continues to work.
@THEMANCAVE2023Ай бұрын
Happy to help always thought as KZbin as somewhere to learn something
@dustd9806Ай бұрын
So not 2006? I changed out my b battery and it’s idling weird..
@THEMANCAVE2023Ай бұрын
Yes should work.. if not.it will not hurt nothing man
@ZxdragАй бұрын
Thank you so much!! My car is running cherry after watching this 😊
@THEMANCAVE2023Ай бұрын
Happy it helped you out
@attzeroАй бұрын
i came from an old g2c video of yours and damn you changed a lot in 6 years lmao
@THEMANCAVE2023Ай бұрын
I am.not sure who you mean I changed but ok
@attzeroАй бұрын
@@THEMANCAVE2023 i meant ur voice
@SEPTEMBERMANАй бұрын
Cone shaped buffing wheel. You're welcome
@THEMANCAVE2023Ай бұрын
That will work as well
@Blue_Rain_89Ай бұрын
You will definitely help lots of people out there friend. I also have a 2007 Camry and always reset it with my scanner but I'm pretty sure not everyone out there has a 2k scanner . Never knew there was a manual method pretty good to know . They are making care nowadays that when you battery dies you have to take it to the dealership cause the car wont move and windows wont roll down 😂😂😂😂 ridiculous.
@THEMANCAVE2023Ай бұрын
That's why I shared the video. Because I think it's ridiculous that you have to drive a car a 100 miles in that condition if you don't do this, I now drive a 2021 Honda Accord touring 2.0, Turbo and Lord knows. If anything breaks on that or it needs adjusting, I actually had to buy an auto about a $700 scan tool just to do brakesand testing not so many nuts and bolts wrenches more diagnostics for sure
@THEMANCAVE20232 ай бұрын
keep the comments coming please you folks comments are killing the algorithm
@user-fp7bh8up2x2 ай бұрын
Ramay ramayan kmet bro😅
@chaseiphone65522 ай бұрын
CANIK TTI COMBAT DESTROYS THIS EASILY 💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯
@THEMANCAVE20232 ай бұрын
canik makes a good pistol as well in a budget range
@darrelldunlap72492 ай бұрын
If used for serious purposes, NO! Not as long as there are good new and used Glocks, Sigs, S&Ws, CZs, etc. Save a few dollars more and get a reliable, fight-proven gun. Go to any good LGS and tell them you are serious about being responsible for your safety. I am sure they will have or help you find a used Glock or other top-tier gun you can bet your life on. Question, when was the last time you saw a Taurus in the holster of an LEO or US Mil?
@THEMANCAVE20232 ай бұрын
Darrel interesting I own 2 sig p365 1 365xl canik tp9 elite Glock 19& 26 h&k and a FN and the wife owns a smith. curious in the well over 50k rounds Ive shot over the last 8 years why your comment is accurate. sig had drop issue and still does smith & wesson is so so glock i can 3d print in my house and make stamped metal internals and there triggers are trash, you spend 600-7 hundo on a gun and must spend 400 more to make it a good pistol. think its fair to say you prefer the brand name not that you have actual experience with taurus failures and you opinion is based on misinformation not fact. But genuinely thank you for actually putting in a comment that is at least sensible to read
@darrelldunlap72492 ай бұрын
Thanks for answering. Really good to explore ideas from others and maybe we can both learn something? As far as Sigs go, the drop issue seems to be related to just the 320 line and not the M17 or M18s. As for experience, I carried a p226 for 16+ years and it worked well when called upon against a butcher knife-wielding assailant. Most would agree the p226 was and is a superior fighting gun. Maybe you disagree? Now as an R-LEO, I do the CCW Course for the State and over the last 8 or so years I have seen a lot of different guns weekly come through and try to complete a very basic 50rnd State mandated course. It is my observation over that period, that the S&Ws and the Glocks consistently, work and go the 50rnd course. Of course, those that don't, have usually been user-modified. Others may work well but these two are the most consistent? Of the two guns that fail to function when needed for the course, Taurus and SCCY seem to fail the most. Anecdotally: 1-Student with a new Taurus reported firing 200 flawless rounds. On the first leg of the firing course, firearm seized and couldn't be cleared and was taken up to the gunsmith to extract the round in the chamber. Student failed being unable to complete the course. No, it wasn't life and death but the Taurus failed to function when he needed it. 2-Same course, four on the line. Two had different Taurus', one SCCY and one S&W. Only one was able to complete the course of fire. Three failed and one passed with his S&W. I did notice you didn't say the Glocks and Smiths didn't work, you just don't seem to care for them and that is just fine. Guess that's why there are Fords and Chevrolets so you can choose to your liking? I guess the only slightly annoying point you made was my lack of experience with the Taurus and my willful spreading of "misinformation." Really no matter, but I thought I would mention it. So after 8 years of seeing folks spend good money on Taurus and the like and seeing them fail on the range, I have drawn the conclusion from my and their bad experiences that given a choice, I would look elsewhere other than Taurus.
@CompanyHaze2 ай бұрын
I'd rather get a CZ turkey made gun. Taurus are trash
@THEMANCAVE20232 ай бұрын
state your facts not your bias.. tell me why and what other manufacture has not had same issues. You can't because they do not exist
@HoodziHockey162 ай бұрын
Junk guns
@CompanyHaze2 ай бұрын
😂he sounds like a noob
@THEMANCAVE20232 ай бұрын
@@CompanyHaze been shooting longer than you been alive
@THEMANCAVE20232 ай бұрын
so i own 3 taurus pistols and each has over 4000 flawless rounds.. what makes them junk besides your opinion ?
@CompanyHaze2 ай бұрын
@@THEMANCAVE2023 because its my opinion. I have an ATI OmniMax AR15 that's run 1000s of rounds with no issues but, it's TRASH....hard to explain but hopefully u get my point.
@CompanyHaze2 ай бұрын
@@THEMANCAVE2023 I'm 51. Age matters not. If you love your trash Taurus, awesome. Its still doesn't make it NOT trash....😆
@cyndejayden46662 ай бұрын
Nice little gun! Easy to pull trigger?
@KyleRS877Ай бұрын
It’s nice
@RWgolfs2 ай бұрын
Will this work on a manual
@THEMANCAVE2023Ай бұрын
glad it help you out
@aliveandwelliam2 ай бұрын
Going to try it...
@THEMANCAVE2023Ай бұрын
hope it helps you
@_cappuccinos2 ай бұрын
5yrs after, and this just saved my ass. Thank you so much!
@THEMANCAVE2023Ай бұрын
well Im glad it helps so many people. That's why I posted it
@alfasiger417829 күн бұрын
@@THEMANCAVE2023 My engine Revs past 2000 RPMs. It revs pretty hard sometimes, engine shutters at times. Is it the engine timing? It started happening after I did one of those carbon cleaning things.
@majdm65372 ай бұрын
Thanks man! You helped me out tremendously with this video! I did subscribed and liked, and I am sharing it right now! The least I could do for you. You saved me at least $173 inspection fee with a dealer+$$$$ for repairor $600 with a mechanic that he will convince you that you need to change something else!!!!😄
@THEMANCAVE2023Ай бұрын
Thanks man ! im am genuinely thankful
@popalot711rb2 ай бұрын
Does it come with all that foam??
@THEMANCAVE2023Ай бұрын
yes it does sorry for delay I guess youtube does not notify me of comments no more
@plumer562 ай бұрын
Thank you for the video !! 😁
@THEMANCAVE2023Ай бұрын
You're welcome 😊
@basicallybenny60472 ай бұрын
Every time I start mine up it revs up to 2000 rpm when I start it. Is that normal?
@ExySmexy2 ай бұрын
No car should be at 2000rpm at idle. It's ok if it goes up when you start the engine but it must go back down to around 1000
@THEMANCAVE2023Ай бұрын
every car will have an initial slightly higher rev upon startup.. my car generally hits about 1000/1200rpm upon start and then idles around 700/800 rpm the initial high idle is the car essentially providing choke to start a cold engine.
@teresawelcome83542 ай бұрын
Yeah, works great when your ebreak doesn't work. 😖
@THEMANCAVE2023Ай бұрын
well if one follows direction, one would not try it without a functioning parking brake lol
@TJsVette2 ай бұрын
I have a question, on the stock radio, is the radio rivited in or are there screws to take it off of the factory trim? I dont really like the aftermarket kit and yes i know there would be holes where all the old buttons are but i could live with that as the new radio i am looking at getting would cover it. (13.3in Joying).
@THEMANCAVE2023Ай бұрын
there are screws and plastic clips
@cyndejayden46662 ай бұрын
Wow! That's going to be quite a set up! Can't wait to see it and what you can do with it!❤
@ImOldSkoolBro2 ай бұрын
Yup definitely works ❤
@THEMANCAVE20232 ай бұрын
glad it helped ya out
@charlescraddock19702 ай бұрын
Worked great for me. Thanks for sharing
@THEMANCAVE20232 ай бұрын
Great to hear!
@elsenjosephc.belorio33192 ай бұрын
I followed this instruction and ruined my transmission 😭 i hate you!
@karlholberry79732 ай бұрын
Legend I didn't know about the little wheel underneath. My problem is sorted. Thank you!
@THEMANCAVE20232 ай бұрын
Happy to help
@jonnybanana883 ай бұрын
Helped immensely! Thanks!
@THEMANCAVE20232 ай бұрын
You're welcome!
@cassiusxclay3 ай бұрын
Worked like a charm.
@THEMANCAVE20233 ай бұрын
Good deal
@cyndejayden46663 ай бұрын
That's really intricate! Can't wait to see it run!❤
@samkaplitz90363 ай бұрын
MTD has been using the plastic bushings on the front wheels for years.Suprizingly they last pretty well & greasing can be done with a standard grease gun. May not last 35 years,but can knock some grass down!
@THEMANCAVE20233 ай бұрын
Agreed
@THEMANCAVE20233 ай бұрын
Agreed
@samkaplitz90363 ай бұрын
A bit of 3-M weather strip adhesive under the floor board mats is all that's needed to h keep them in place.
@THEMANCAVE20233 ай бұрын
I used alien tape that stuff is amazing
@samkaplitz90363 ай бұрын
Anybody have any input on the right side pedal for ground speed.Harder you push,faser you go. Mowing a large yard,constant pressure is required on the pedal to go forward or reverse.Need a way to "lock in" on a good ground speed so you don't need to constantly push hard on the pedal.
@THEMANCAVE20233 ай бұрын
I tack welded a small bracket to mine so my forward motion is about 2.5-3 mph. I use.this when mowing my back yard as it's 3/4 acre. In front yard just use the pedal as it smaller and has slopes