Walker Performance

Пікірлер

@thomasrogers1509 11 күн бұрын

Thank you for putting this together! I am getting my @** kicked trying to find this pump. Is there any part number other EP381 that could help me? What was the AZ part number? Tried to see the box but can't. Thanks for the help

@walkerperformance7626 11 күн бұрын

@@thomasrogers1509 looks like the Delphi FE0114 is available on Rock Auto. It’s the equivalent of the EP381. Hope this helps.

@thomasrogers1509 11 күн бұрын

@@walkerperformance7626 MY DUDE! THANK YOU

@thomasrogers1509 9 күн бұрын

Are we adding a hole for the wires to this sending unit? Not seeing the stock wire hole.@@walkerperformance7626

@thomasrogers1509 8 күн бұрын

Do we drill a hole and grommet the sending unit for the wires to pump?@@walkerperformance7626

@tristansmirnow850 24 күн бұрын

Stock stall

@walkerperformance7626 22 күн бұрын

@@tristansmirnow850 3,200 stall from Circle D Specialties.

@davidessien5465 2 ай бұрын

Please, if the return fuel system is not allowing fuel to go flow back to the track, what could be responsible for that? It's a friend picnic with a 5sfe engine with 4cycl

@walkerperformance7626 2 ай бұрын

@@davidessien5465 you could have your supply and return lines mixed up, or an obstruction somewhere.

@davidessien5465 2 ай бұрын

Thank you sir❤@@walkerperformance7626

@mechtech85 2 ай бұрын

Wish I would have seen this a few weeks ago before I butchered an 85 sending unit l!!!! Edit. Not a baffled tank

@cantducknoslug 5 ай бұрын

how much whp with this setup?

@walkerperformance7626 5 ай бұрын

I’ve never had it on a dyno. Probably 350-360 at the crank.

@autoxolds88 7 ай бұрын

Does the truck have vacuum/power brakes? How has this cam effected their operation? How is the drivability? Thank you and your truck looks and sounds bad ass.

@walkerperformance7626 7 ай бұрын

Thank you! The truck has excellent vacuum. Still has the original booster/master and stops on a dime!

@angelfabian5025 7 ай бұрын

Great video and truck looks amazing after the wash! How can I know if it ever goes up for sale?

@walkerperformance7626 7 ай бұрын

Thanks! You’ll know when I post another video of it sitting it my shop. 😂

@angelfabian5025 7 ай бұрын

@@walkerperformance7626 damnnnn….

@danjim7056 8 ай бұрын

Is this like 1987 tank? I need a tank but for a long box and they are a bit longer making them 20 gallon.

@walkerperformance7626 8 ай бұрын

Yes, you need a GM1C.

@danjim7056 8 ай бұрын

@walkerperformance7626 thank you sir.

@stevepope5484 10 ай бұрын

Guess u didn't have time for details? Why can't folks do videos like this??? He hasn't filmed his yard/cat /tractor/mentioned his dentist? Just The Facts. Excellent Video!

@paulols_-232 10 ай бұрын

So u will need just springs and the cam ?

@walkerperformance7626 10 ай бұрын

Cam, springs, seals. I always measure for pushrod length and highly recommend a trunion upgrade on the rocker arms.

@bendonaldson3604 11 ай бұрын

Sounds really good what all have you done to it for it to sound so great

@walkerperformance7626 11 ай бұрын

Thanks! It’s a 2004 5.3L with 243 cylinder heads decked .030”, TBSS intake and TB, Howard’s Rattler camshaft and supporting components, LT headers and a SpinTech muffler.

@Ozsanti71 Жыл бұрын

Thank you man. Very helpful 👍

@jas9020 Жыл бұрын

Do you have to tune it after ,🤔

@walkerperformance7626 Жыл бұрын

I’d definitely recommend tuning or at least looking at data after fuel system changes.

@mikedimas373 Жыл бұрын

What local part store's did you get the fragola fittings?

@walkerperformance7626 Жыл бұрын

Race Parts Solutions (Dealer for Fragola) is about half an hour away from me.

@darylwood9361 Жыл бұрын

Can you give me the part # for the fuel line?

@walkerperformance7626 Жыл бұрын

Fragola 732006

@darylwood9361 Жыл бұрын

@@walkerperformance7626 what fittings do I need to use on this hose to work with the fittings on the sending unit?

@walkerperformance7626 Жыл бұрын

@@darylwood9361 you’ll need 3/8” and 5/16” hard tube to -6 fittings. They’re available at summit or Fragola.

@hardball107 Жыл бұрын

Good video, I do basically the same thing except I use 3/8" brake hard line with short hose pieces at connections. It works well with an external pump also with a 100 micron pre filter, in that case I return to the filler neck so you don't have to pull the tank. I also place the Corvette filter/regulator as far forward as possible so a cool supply of fuel dead heads into the fuel rail. I use Walbro 255 pumps for everything and on vehicles that might suffer from heat soak or vapor lock sometimes I install a T into the fuel rail and tap the outlet and install a Allen plug with a .5mm hole (.017") in it to return a small amount of fuel keeping everything cool. Works like a dream.

@jjch34 Жыл бұрын

Hey bud how do I get ahold of you I’m going to need to have a tune done soon and have a few questions

@walkerperformance7626 Жыл бұрын

You can email me at [email protected]

@chingonchacho Жыл бұрын

do you have a parts list to order everything

@Fahrenheit_Motorsports Жыл бұрын

Wish I would have seen this video a month ago. I purchased the Holly EFI fuel pump module. It’s going everything needed for the LS including an in tank return. Not sure what I do with the truck intake manifold and it’s return line. Suggestions? Can it be blocked off or do I need to change to a system that doesn’t have a fuel return like the SS trailblazer setup?

@walkerperformance7626 Жыл бұрын

You can find return-less fuel rails that came on some ‘03-‘07 Tahoes, Silverados, etc.

@Fahrenheit_Motorsports Жыл бұрын

@@walkerperformance7626 I got lucky a few weeks back and find the only stainless, returnless style fuel rail for the truck intake. It’s since been installed and waiting for the truck to get wired up. Thanks for the response man!

@josephburnham4621 Жыл бұрын

Great job buddy 👍🇺🇸

@walkerperformance7626 Жыл бұрын

Thank you!

@gdp2727 Жыл бұрын

Having a hard time finding the AC Delco EP381 got any tips?

@walkerperformance7626 Жыл бұрын

You can also use the Spectra Premium SP1115.

@gdp2727 Жыл бұрын

Thanks Alex

@iceman1739 Жыл бұрын

Why would you need the tank sending United and another one on side?

@walkerperformance7626 Жыл бұрын

I’m sorry, but I’m not sure what you’re asking. There is only one sending unit required in the setup, and it’s in the tank. 1987 R10 pickup.

@renetavares586 Жыл бұрын

Can you help me more about fuel system sir

@stevoeight Жыл бұрын

Is there a single pump that would work in that hanger for a cammed ls3?

@walkerperformance7626 Жыл бұрын

There is. I would recommend a genuine Walbro/TI Automotive 255 LPH. It should come with the internal harness and would be plug and play.

@egonzalez3766 Жыл бұрын

what do you do for dual tanks?

@walkerperformance7626 Жыл бұрын

Haven’t made one function yet. On the one I have done, I used the passenger tank as a reserve to pump into the left tank. May have a video on that soon.

@yamahondazuki95 Жыл бұрын

Love it man this is something different than I have seen done. You would need 3/8 for feed and 5/16 fitting for return line wherever needed but I like this idea for sure.

@davidjessee7701 Жыл бұрын

I just Ls swapped an 84 k10.. I believe they installed a walboro pump on the rail, and it is very noisy. I installed a new tank with new pick up and sending unit a couple years previous…. My question is would a pump inside the tank be a lot quieter?

@walkerperformance7626 Жыл бұрын

Hey David. Yes, it would be much quieter, more efficient and you would see more longevity out of your fuel pump. Every conversion I do receives an in-tank pump. Externals are just a nightmare.

@brandongardner3999 Жыл бұрын

What exhaust are you running

@walkerperformance7626 Жыл бұрын

All parts are in the description.

@VolunteerGarage Жыл бұрын

Can’t wait to see what you do with it been watching you and the Ubt crew for my build thanks for the content keep it coming man!

@jessefarley4609 Жыл бұрын

I know O'Reilly's has rubber gates efi/e85 in bulk buy by the foot or w ,25foot hose I think part numer is like 17092 don't quote me on this and then they have buck barbs to screw into steel and efi hose clamp buy the box or each price isn't bad normally kept for commercial customers but they don't care to sell to a walk in I spent 7years as a manger and I would bet my truck title I could of gotten all those parts cheaper and if you buy much for like a restore then go in and ask to apply for a cash account it saves a ton on the little stuff or there the bendable steel stuff most people use for brakes but since the fittings are brass kinda illegal but seen a ton of them used but work great for fuel and transmission just ask if you can look at their fittings also there's some rolls of copperhead line it's actually can be used for brakes and it's fairly cheap and no bender needed just my two cents...when I get to that point on my square body I'm gonna run all metal lines like factory then depending if I carb 5.3 I'll thread it into the carb and if I efi I'll run metal to fire wall with a compression barb to efi hose

@flako7773 Жыл бұрын

What gear ratio you running?

@drewduckett81 2 жыл бұрын

An install video on this setup would be awesome, thanks for making our lives easy showing all the part numbers!! Definitely gonna go with this for my 5.3 swapped 81

@walkerperformance7626 2 жыл бұрын

Thank you for tuning in. I’ll have plenty of videos coming with my ‘83 Sierra build.

@larryjohnson3033 2 жыл бұрын

Nice!

@duanesgarage6294 2 жыл бұрын

Thanks that will work on my square and my Malibu except the sender. 🇨🇦🏁

@MiguelRamos-ry8io 2 жыл бұрын

Which fitting do you use for the top of the regulator going to the fuel rail? And can we run the rubber hose for the whole system from regulator to fuel rail?

@walkerperformance7626 2 жыл бұрын

It’s an EFI to -6 AN fitting. Yes, you can use the EZ Street hose for the entire system. Just watch for sharp edges and keep it away from heat.

@MiguelRamos-ry8io 2 жыл бұрын

@@walkerperformance7626 sounds good man thank you, I appreciate your reply 👍🏻✌🏻

@efrainromo3607 2 жыл бұрын

Is this sending unit for drivers side or passenger side tank? Or will it work on both? I have passenger side, great video Thanks!

@walkerperformance7626 2 жыл бұрын

Hello, Efrain. Sorry for the delay in my response. I used the driver’s side tank and sender in this video. The sending units are reversible, so you can change up your fuel line routing if desired. Hope this helps!

@walkerperformance7626 2 жыл бұрын

@dylanbrooks7313 2 жыл бұрын

Walker performance is there any way you could post all the part numbers for the fittings and stuff I tried to stop the video to right them down thanks

@TheLimitedmod22 2 жыл бұрын

S-10 chassis?

@walkerperformance7626 2 жыл бұрын

Yes sir! ‘97 ext cab that I cut down 8” to get the wheelbase dialed in. Sitting on custom cab and bed mounts.

@tyferguson564 2 жыл бұрын

You think this will work for a 70 c10

@TheLimitedmod22 2 жыл бұрын

If you move the gas tank under the bed it would....pretty certain sending unit will not fit tanks in cab. I put '68 Nova gas tank at rear frame rails to get them out of the cab. You just need to cut the neck down and use 2" (I believe) gas filler hose to reconnect the tube

@walkerperformance7626 2 жыл бұрын

It would be a lot of work to get this setup to work on a 67-72. You’d be better served using a blazer style tank or one from Boyd Welding.

@tyferguson564 2 жыл бұрын

@@walkerperformance7626 do you know what year blazer tank to use?

@walkerperformance7626 2 жыл бұрын

Just found an EFI ready rear mount fuel tank for 67-72 trucks. Check out Tanks Inc.

@ramiroramiro7010 2 жыл бұрын

My fuel pump sending 110 psi wat needs to do 84 c 10 put 09 5.3 but not having return line fuel need regulator o is fine thanks 🙏

@Idkk587 2 жыл бұрын

Would this work for my 1986 Sierra? I’m putting a stock 99 5.3 in it

@walkerperformance7626 2 жыл бұрын

Absolutely.

@raultrujillo7582 2 жыл бұрын

Sounds amazing. Do you know the specs on the cam ? Doing the same swap and yours is exactly what I’m looking for

@walkerperformance7626 2 жыл бұрын

Thank you, Raul! It’s the Howard’s Rattler. Specs are as follows: 226/234, .525”/.525” @ .050”, 109 LSA.

@trailerparkcryptoking5213 10 ай бұрын

@@walkerperformance7626that’s very similar to the cam in my BBC and it runs very good! How does it perform in that LS?!?

@walkerperformance7626 10 ай бұрын

@@trailerparkcryptoking5213 I have no complaints. Plenty of power for a driver. It sounds phenomenal, makes great power and averages 22 mpg.

@patrickmacord8725 2 жыл бұрын

Great video! Can you do a video of the installation of all the parts? I bet your subscribers will ten fold. Part 2 of the fuel system.

@walkerperformance7626 2 жыл бұрын

Thank you! Hopefully I can make another over the installation on my ‘83. Thanks for the suggestion!

@netfun8 2 жыл бұрын

Beautiful truck! What did you use for a gas pedal? I need to choose a gas pedal for my 72 c10 w/ 04 5.3 ls. Any thoughts?

@walkerperformance7626 2 жыл бұрын

Thanks, Russell! I’ll be using a 2010 Camaro pedal with the Tejas Steelworks relocation bracket. I would check out Animals Speed Shop for your needs.

@budbrown5687 2 жыл бұрын

I like that Emily is just as excited about it as you are!.. Also, in the UBT video towards the end Emily is standing behind you and Robbie ask you "How you're feeling about it?".. the smile on Emily's face is priceless!! To have a significant other that also shares your passion is a wonderful thing! You're a lucky dude.

@walkerperformance7626 2 жыл бұрын

Thanks, Bud! She is definitely passionate about the hobby! She loves these trucks and the places they take us. Thank you for watching and for your kindness!

@edcka29 2 жыл бұрын

Very simple and informative.... thanks for part numbers and all.... made my job easy....

@captainsledge7554 2 жыл бұрын

Hm.. mine already had sending units

@Blakep7704 2 жыл бұрын

What would need to be changed if the truck is an 87 with the original tbi? Would changing only the pump work with the factory fuel line? 87 has a return line from the factory.

@walkerperformance7626 2 жыл бұрын

All you’ll need to do is upgrade your fuel pump and install EFI rated fuel hose with EFI clamps. Nothing wrong with re-using the hard line on an ‘87.

@Blakep7704 2 жыл бұрын

@@walkerperformance7626 what pump works?

@walkerperformance7626 2 жыл бұрын

@@Blakep7704 AC Delco EP381, Spectra Performance SP1115, Genuine Walbro 255.