2 ай бұрын
Пікірлер
@Yusef.alizade.kurdabad 2 ай бұрын
❤❤❤❤
@mainoffice5101 2 ай бұрын
Does the air pressure drop once it passes through the beads?
@palehorse1021 2 ай бұрын
Mine came with a screen in the top cap. Not sure what it is for.
@lematecprotools 2 ай бұрын
Hi dear, this is a filter screen that can sieve sand, removing larger gravel particles or other impurities, enhancing the efficiency of sandblasting.
@sokorrote 2 ай бұрын
Hi. Does this works for mirrors
@lematecprotools 2 ай бұрын
Hi dear, yes, it can use on mirrors
@KAABYANAN85 2 ай бұрын
Yan po ba Yung finish Niya mabuhangin?
@lematecprotools 2 ай бұрын
Yan po ay depende sa laki ng butil ng buhangin. Kapag mas magaspang o mas malaki ang butil, mas magiging mabuhangin ang finish. Pero kapag mas pino ang buhangin, magiging mas makinis ang surface pagkatapos ng sandblasting
@RobertWill-uq3iv 3 ай бұрын
"An efficient and time Satan solution"
@bearnecessitits 3 ай бұрын
Using the cheapest shittiest sandblaster that you can get from any discount hardware store or online retail supplier you wont have to entirely remake your parts 😂
@lematecprotools 3 ай бұрын
Please use our sandblaster gun lol
@rafaelmiguelintimoreno1014 3 ай бұрын
Con q tipo de compresora puede trabajar bien
@lematecprotools 3 ай бұрын
Para la construcción, utilice un compresor de aire con una potencia de más de 3 caballos de fuerza. Lo mejor es proporcionar un CFM de 7 o más para obtener mejores resultados.
@sunilsarai-u4t 4 ай бұрын
Iska name kayah
@lematecprotools 3 ай бұрын
ka valve pynbeit
@kayjay7780 4 ай бұрын
no siphon metal part in box nor metal tube. Instructions talk about metal nozzle. Not there. ALso a red disk of uncertain use.
@DANIELCRAIGO 5 ай бұрын
Respirator?
@weldmama 5 ай бұрын
Why is it called a liquid blaster and is it available in Australia and if so through who?
@lematecprotools 3 ай бұрын
Because it can be filled with liquid, such as soda water, to clean dirt. You can also use pepper water and spray it on plants, which is a natural way to prevent insects.
@alfredodelacruz9978 6 ай бұрын
Una pregunta que tipo de arena usas y que grado
@lematecprotools 6 ай бұрын
We used Aluminum Oxide and #220.
@alfredodelacruz9978 6 ай бұрын
@@lematecprotools muchas gracias 👍👍
@adithyan876 6 ай бұрын
Were to buy this product
@kenactofkindness4017 6 ай бұрын
@trividmicro 6 ай бұрын
用什麼樣的空氣壓縮機?????????
@lematecprotools 6 ай бұрын
你好, 建議3HP以上, 供給流量至少200 l/min以上為佳, 謝謝!
@Escalofrios29 7 ай бұрын
So if i want to clean an engine bay of grease and contamination Soda blasting would be the best
@evgenidimitrov2639 6 ай бұрын
And if you want to clean your intake valves walnut.
@lematecprotools 6 ай бұрын
Yes, it's correct to use walnuts for clean it.
@igotstoknow2 7 ай бұрын
Move the string away from the grinder!
@lematecprotools 7 ай бұрын
Thank you for your remind, it's very important.
@keven80790 7 ай бұрын
請問這個是要接一般空壓機嗎
@lematecprotools 7 ай бұрын
你好, 是的, 建議空壓機2.5馬以上比較適合使用.
@philliptomlinson1275 7 ай бұрын
Hi I have a regulator like the one in the back round with the red power reset button can you please tell me how to change the battery thank you in advance 😊
@alexnelson8 8 ай бұрын
Only need one more letter to sound like English, "s",
@1monsieur 8 ай бұрын
C'est bien ordinaire....
@carnut7436 9 ай бұрын
I tried backing soda and I used up so much of it for a small project. How much flow should I adjust?
@lematecprotools 9 ай бұрын
Thank you for your message. Please adjust the flow using the sandblaster's valve on the left. It can control the media flow if you find that spraying soda is too excessive.
@toastymctoastinson 9 ай бұрын
I have a project that involves CNCing polycarbonate then sandblasting it to remove all the scratches and imperfections, what would you recommend me to use for the sand blasting material
@lematecprotools 9 ай бұрын
Hi dear, if you will use a sandblaster gun on plastic objects, we suggest trying baking soda or other soda powder first. If not working well, please try Aluminum oxide.
@TheOtherMisterRogers 9 ай бұрын
Harbor Freight 😁
@rockisrx 10 ай бұрын
I can’t wait to do this! Got my sandblaster and it should arrive soon
@lematecprotools 10 ай бұрын
Hi , hope our tool and video can help you. If you have any questions please feel free to reach out to us.
@SiddharthS-i2j 10 ай бұрын
What is the accuracy of reading? is it 0.1 or 0.01 or 0.001 , till how many decimals can we measure ?
@MattyH64 10 ай бұрын
I used $12 blasting sand from Menards and that worked better than the Harbor Freight media.
@nonamebleach 10 ай бұрын
Can any of these be used to sand blast the frame of a car? I plan on laying on the ground under the car on jack stands. Would it work?
@lematecprotools 10 ай бұрын
Hi dear, Yes, this tool can works for your application. Please note the air compressor we suggest over 2.5 HP and offer 7 CFM above will be good to use the sandblaster. More information please refer to our page: www.lematec-tools.com/sandblasting
@nonamebleach 10 ай бұрын
@@lematecprotools thank you for the reply. I have a small air compressor but I will double check it to make sure it is sufficient. 😊
@lematecprotools 10 ай бұрын
My pleasure, please refer to our page for more information about air compressor. www.lematec-tools.com/suitable-air-compressor Thank you.
@leonardo5727 11 ай бұрын
promo sm 😱
@Matt_Davis54 11 ай бұрын
Accuracy?
@lematecprotools 10 ай бұрын
Sorry for our late reply. Yes, our pressure gauges are laboratory calibrated to ensure correct accuracy. More information please refer to our page: www.lematec-tools.com/air-regulator
@bannisterjames2845 11 ай бұрын
Hello. I need one of these. How to contact you
@lematecprotools 10 ай бұрын
Sorry for our late reply. Please contact via e-mail: [email protected] Thank you.
@almaborja9116 11 ай бұрын
Details pls location
@almaborja9116 11 ай бұрын
How much
@lematecprotools 10 ай бұрын
Sorry for our late reply. We are in Taiwan and Distributors in the United States, Saudi Arabia. How can we help you?
@aakashdeeptoor 11 ай бұрын
How can i made this setup? I am in India
@WerEwer-f4t Жыл бұрын
Don't use beach sand couse it's free😂😂😂😂
@btbd2785 Жыл бұрын
Can I also add a filter like a Desiccant one? How do I do that? I am going to be using a Spray gun to paint body panels and it seems like the Lockable unit is the way to go? What are its benefits over the other versions like the Diaphram control model or the cbo that has the regulator built into the filter? I would prefer using a Desiccant filter. So can I set up this type of filter with the digital gage with Lockable feature and a Desiccant filter. Please provide me with the part numbers. Thank you
@lematecprotools Жыл бұрын
Hello there, Sure, you can install our desiccant air dryer on a spray gun and then connect the air regulator. Please refer to our air dryer video: kzbin.info/www/bejne/pKrTmKqZZcqjmqM&ab_channel=LEMATECProTools Any type of air filter or air regulator is fine. 2 in 1 air regulator with filter is more lightweight. Video: kzbin.info/www/bejne/gGHUcmuPl52rpqM&ab_channel=LEMATECProTools If you need more information, please contact us via email, [email protected] Thank you.
@btbd2785 Жыл бұрын
Can I also add a filter like a Desiccant one? How do I do that? I am going to be using a Spray gun to paint body panels and it seems like the Lockable unit is the way to go? What are its benefits over the other versions like the Diaphram control model or the cbo that has the regulator built into the filter? I would prefer using a Desiccant filter. So can I set up this type of filter with the digital gage with Lockable feature and a Desiccant filter. Please provide me with the part numbers. Thank you
@PUTDEVICE Жыл бұрын
the chain will run so smoothly and nicely when you insert lots of particles into each link.
@MrBoshell. Жыл бұрын
Let me just grab mine out the boot and we can begin
@engchoontan8483 Жыл бұрын
Tell people, air-pull-air, motor is outside and will not get dirty. This is known by terminology of venturi or whatever but basically, for exhaust, for intake, for vacuum, for... Air-tank slowly filled and compressed then bring it somewhere with this tool and start less-noise(no motor noise) cleaning. Size of dirt. Same concept for textured-wall paint-gun. Same air-compressor, just different "gun". From sludge to sand grit to ... From blow to suck. From torque-wrench to ... People electrical-turning noisy impeller when can quieter.
@mangosee Жыл бұрын
Good information.
@christophertanViolin Жыл бұрын
This wont clog the chain?
@lematecprotools Жыл бұрын
Hi sir, we did it, and no problem. Keep air and sand media dry.
@charlescharles3693 Жыл бұрын
I'm very happy to be part of the LE LEMATEC team and excited for what the future has to bring to this organization.
@lematecprotools Жыл бұрын
We're thrilled to have you on board at LE LEMATEC! Excited for the journey ahead and the successes we'll achieve together.
@jakea511 Жыл бұрын
Girls love needle guns they show up for work every day.they have perfect attendance and they love there job it's perfect.😊
@lematecprotools Жыл бұрын
It's great to hear this news, thank you.!👍👍👍
@mohammedjaffer9162 Жыл бұрын
I want blasting sand
@alanrtt9992 Жыл бұрын
I searched rust blasting nazi this comes up
@Dennis699100 Жыл бұрын
數位的這個一組多少錢？
@Dennis699100 Жыл бұрын
這個一組多少錢？
@lematecprotools Жыл бұрын
你好, 可以參考我們的蝦皮商店: shopee.tw/product/138889/5253608828/
@audreychang9942 Жыл бұрын
超級感謝Vic! (From 小渝)
@lematecprotools Жыл бұрын
謝謝支持👍👍👍
@chu5631 Жыл бұрын
有濕式氣動噴砂槍？
@lematecprotools Жыл бұрын
你好，這個沒有。請問要做什麼應用呢？只有蘇打粉可以混合於水的可濕噴（清潔污垢用）。