Hey thanks for the help, I look at the stuff in it while trying to do what you did since mine was new bought defective, there is a copper thing that is very small like brush inside, my first attempt was it was still the same so in the second attempt I raise that small brush part and it worked like magic. I think that was the sensor and it was not raised enough have a good sense of scrolling. anyways thanks.

i got cheap unlocked motorola razr OG from local market, east eu has 2g used for other reasons for all 3 operator towers as well so it will still work! If i were to put my modern sim card with appropriate card adapter frame in it i could just start using it, it even came with own 1 gb sd card for music to listen from it, if the battery is not holding good we also have excellent website based store that sells batteries for EVERY old "dumb" phone out there! if i want to take some "vintage" pictures/videos with its crappy camera, usb micro B gives access to it easily!

i just got the dust and hairs out of my mice with a painting brush and it works as new

0:47 kool

got a brand new death adder doing this but 10x worse..

Does this still work?

Will it use wifi to connect?

Terible build quality, also the clickers...

Would this work with a tello sim card?

I just bought my new mouse and a few days later this problem happens. I had the same mouse before and had the same problem, The problem was solved when I cleaned the scroll wheel. But this new one is totally different. Here is how i fixed it: ① Dissamble your mouse just like in the video ② You see a white tube next ti the scroll wheel at 4:01 ? ③ Use your finger and try to lift it up a little bit while using your othee finger to try to scroll the mouse wheel and see if its work. ④ If it works, Grab a tissue and tear it a little and then place it right below that white tube beside the Mouse wheel 4:01 ⑤ Make sure the Whit Tube lifted slightly because it was blocked by tissue. ⑥ After that, Go and try it again. if it works congratulations. if it didn't work, Repeat step ③ and ④ and make sure to clean it up properly before doing this method.

dude taking a picture of not using his phone! LOL

bye

Yeah using a 2005 flipphone is just enough technology. You could call, text, Bluetooth exchange ringtones, pictures. But they didn't absorb your life.

I have an Atom N270 netbook I mainly use for forum browsing. It was one of the first Atoms and uses the same chipset generation as early Core 2 Duos.

Where can i get mouse scroll wheel

"Ryan Reynolds Mobile" is so accurate lol. Also is that a Motorola V551 or V557 at the beginning? I can't tell.

mouse elimde kalirsa iki elim yakanda

well blowing my mouse worked tyx

Guys, to save you trouble, thank me later. Just blow into the assembled mouse, where the wheel is located, and that's it. Mouse scroll fixed.

i use a flip phone, a new one, but its my daily because of the brainrot involved with smartphones and their expensiveness, nondurability, and overall excessively hard to use-ness (as phones evolve they just get harder to use, especially when swiping up from the bottom of a screen can be used for 5 million different things all fighting at once.). i love my simple flip phone!

of course all it took was some air to fix this stupid issue, didnt have compressed air so i did it the ol fashioned way and it worked, stupid mouse lol

Im connected to T-Mobile and have a Nokia 2320C-2B (A GSM/ 2 G Phone from like 2009). The phone still powers up and has a few photos, audio and messages I'd like to transfer the way you show in this video. Can this same method be done with a Nokia?

Holly shit, what a shit mouse it is. The whell does random moves. And to fixe it we need to use a hair dryer to remove the screws??? It goes straight to the trash instead, I go back to Logitech.

less than a year, mine happen same, razer quality really bad.

bro fix mine it double click register

you know what is strange? my pc chipset actually supports directx11 but its doing the same thing like in this video and the sad thing is that the emulation refused to work its still doing the same thing

A time ago my IPM-41-D3 motherboard was damaged and the technician changed it to an ASRock N68-S3 UCC. The thing is that he "upgraded" my Intel Pentium E5300 (GMA 4500) to a Athlon II (i dont remember the rest) (Nvidia GeForce 7025/nForce 630) and now some stuff I used before just doesn't work anymore (with GMA it worked already bad). Is there another way to emulate DirectX 10 *_WITHOUT_* losing perfomance and *_WITHOUT_* upgrading hardware

it made it worse for me :/ fack

Took me one business day to mouse scroll down to the comments

The best phone I had was a little flip phone like this. I keep hoping they'll re-introduce them but I don't suppose they will.

Ur the best bro!!!!!!!!!!

2024 update? :') Is this still possible

i fucked something up and now my scroll weel os like a g502! im not compaining

I have a laptop like this my dad bought in 2009 for 700 $ but now it's dog it has 2gbram ddr2 and the same cpu you put with 233 ssd

Not me watching this on my flipphone, lol my mom got this one because she refuses to let me have a normal phone. Also it's a straighttalk phone.

THANK YOU!!!!

i tryed using lighter and quickly under the mouse puting the fire from distance, every like 5 rotate clicks was doing the same and the hair burned quickly and then used compressed air to get out completely from the wheel and it fixed 😂

Clean the exterior of that mouse dude, literally old food and poop finger crust yuck wtf

@Val9k Thank you for your nice video. It helped me a lot. There is a way to clean the sensor wheel without breaking your mouse. Do not destroy the 4 clips. What I did: Remove everything like you did in your video except the sensor wheel. Do not take apart the 4 metal clips that hold the sensor wheel. After removing the scrollwheel and the board take a cotton stick and plunge it into isopropyl alcohol. Then press the stick on the underside to the sensor wheel. Same from the topside. Let alcohol flow to the sensor wheel. Remove the fluid with a tissue for some times. Put scroll wheel on and rotate backwards and forwards. Put some alcohol into the cap of your bottle and finally you can dip the sensor wheel completely into the alcohol and remove the fluid with a tissue for some times. Apply the scrollwheel intermittent and rotate it while alcohol is inside sensor wheel area. Repeate some times. Before assembling your mouse your can shortly dry the sensor wheel area with a hairdryer. This worked for me. No breaking of metal clips. Sorry for bad english.

I doubt this can do 720p 60 KZbin videos

I still use my old 2g phones they are the coolest phones I own iPhones and smartphones are distracting life sucking garbage! T-mobile do not discontinue 2g respect the people’s choice !

who the hell have mesages in voicemail in 2023 lol

Thank you so much for this. I used your tutorial for Deathadder V2 (except clamping the sensor with a paper clip, I was lucky enough to clamp it down 😂) and now it has no squeeky sound on the scroll wheel anymore. Again, thank you so much for your vid.

You idiots need self control. Youre abandoning a toy by getting another toy. Really????

Mouse wheels have been a problem since forever. I prefer if they had a mini touch pad instead of a mouse wheel... and maybe it could work in all directions instead of only vertically.

My first laptop/computer was a core2duo!

Ohh I know how! What you do is you insert a SIM card and turn it on and that’s it 😊 Since you used Ameridefaultism we can ignore your instructions 😊👍

youtube

ggdvgdgggdggfsrresfjkhjhjhjhjjhjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd

I had thought about ditching my current modern phone for an older flip phone for like a month. Try to make some sacrifices and live simpler. Kinda sad that things have excelled so far that what was popular and efficient 20 years ago is now obsolete.