kinetitech

Пікірлер

@aquaticlives2948 4 ай бұрын

Just until its tight or do i still need to go one full turn after i feel the initial tightness? I have this very same brake

@elsamuraiguapo 4 ай бұрын

Is there something like this for the S&W FPC?

@Back_Lash 11 ай бұрын

How much do the shrouds typically weigh?

@SaulTamalezX8 11 ай бұрын

Whats this for???

@nopro5433 11 ай бұрын

Chromey on a fire arm 🤢🤮

@voodooquads 11 ай бұрын

lol why even say anything at all. “Chromey”??? Are you 12.

@jacbosmitt Жыл бұрын

What size is the roll pin that goes into the trigger shoe. I see you can order spares, but it doesn't say what size they are. Thanks

@wrekman1 Жыл бұрын

Kineti Tech is garbage.

@rickyfitness252 Жыл бұрын

Why?

@theREALdingusMD 17 күн бұрын

No you.

@Caligari87 2 жыл бұрын

Curious, what are the internal threads on the tube / cap?

@MrBossuporbowout 2 жыл бұрын

Will adding the shroud extension help increase velocity in shorter barrels?

@ulyssezguerrero7621 7 ай бұрын

@zixby2 2 жыл бұрын

Still doesn't work on pistols

@betlogenako7193 2 жыл бұрын

What about on 556?

@Lwwestvalley 2 жыл бұрын

Where can I get one of these?

@Cj-sf1ig 2 жыл бұрын

Can this product work on m&p15 sport2. 5.56??

@mcguzman5398 Жыл бұрын

Did you ever find out? I just got one

@rackadactal3044 2 жыл бұрын

Do they have a muzzie brake for CZ scorpions ?The original one is starting to rust. Which is easily rectified with a good amount cleaning and gun oils but I want something that’s not going to break down that fast when I haven’t had it even a year yet.

@TennisWorldSetPoint 2 жыл бұрын

I want to help someone with a Smith and Wesson mp 556. It's not a standard m4 barrel. It might be socom I'm not sure but it's thick till the end. It's not skinnier then thickens by the gas block it's .75 all the way to the end. Where do I get the adapter?

@cchof78 2 жыл бұрын

Will this work on the Performance center model which has the thicker diameter fluted barrel?!

@mac40bully70 3 жыл бұрын

This guy can't talk without saying huh fifty times for every other word

@mac40bully70 3 жыл бұрын

Video sucks and the 1 pic on web site only shows partial of shrouds??? Click on more photos nothing comes up ???? Probably scam

@Dogood247 3 жыл бұрын

So will everything fit for an sw mp15 sport 2 not the 22?

@671bboyParkour 3 жыл бұрын

do you have one available for the DB AR9?

@easy1965 3 жыл бұрын

do you think that would fit a 15 in rail?

@daravinthompson4885 3 жыл бұрын

Decent album

@lucasvolini 3 жыл бұрын

This is a 10-minute tutorial video. You record the video. You see that the camera puts the tutorial aspect of this video totally out of frame. Instead of taking another 10 minutes to record a new video, you go ahead and post this video.

@voodooquads 3 жыл бұрын

Lucas Volini I got and understood it fine.

@MrJoe-eh4uy 3 жыл бұрын

can you use a plug on non threaded barrel? for more sturdier on the long shroud. i have the 15-22 and the plan is to get the adapter, the longer shroud and the plug... will that work?

@Hunterslife315 4 жыл бұрын

Can you get these for a 223 ar15 platform? Where can i find them if so?

@ZealotsACH 3 жыл бұрын

No, and if you can find some company making them for .223 or 5.56, don’t buy it. These work ok for .22lr because of how small the round is. Using this on a .223 or 5.56 would likely result in the part being blown off the end of the barrel.

@Hunterslife315 3 жыл бұрын

@@ZealotsACH gotcha thanks my man

@TennisWorldSetPoint 2 жыл бұрын

@@ZealotsACH honestly I think if u dimple the barrel and set screw one and use two pins and welds like a muzzle break it might not blow off. You can always try to attach the 24 5/8 that way it's a way bigger hole so less pressure and they make should attachments for it I just bought one. This is for a shroud barrel cover so the worst that can happen js the thing pushes off. I'm not saying do this for the use of a break. That could be dangerous if not pin and welded and like I said use the 30 cal it's a 10mm hole your not bottle necking the pressure nearly as much.

@ZealotsACH 2 жыл бұрын

@@TennisWorldSetPoint just have a gunsmith thread the barrel. It’s not expensive.

@betlogenako7193 2 жыл бұрын

@@ZealotsACH $150

@2luisam 4 жыл бұрын

Love you dude! Awesome vid!

@chrisgs8727 4 жыл бұрын

This trigger shoe works with gen 3 / 4 / 5 glock trigger bars ??

@fornello123 4 жыл бұрын

does the aluminum not get worn away by the hot gases?

@mistergeer8627 4 жыл бұрын

Please tell me you also have this for 5/8 x 24...

@wavular 4 жыл бұрын

will this work on my GSG-15 22. Cal?

@ST-dd6ny 4 жыл бұрын

I've owned a Kineti-tech trigger shoe for 1 year and ran less than 1,000 rounds with it. The trigger shoe safety (the little tab where you press the trigger) doesn't work anymore. I don't know if the spring broke or jumped out, but now it's loose and I can't trust it anymore. UPDATE: I sent it back to Kineti-Tech, apparently, the letter was ripped open, they accepted the "torn apart" envelope and I lost about $50. I'm never buying from them again.

@kinetitech 4 жыл бұрын

per our 2 or 3 emails this week... send the item you purchased last year back so we may inspect it, repair or replace it. Thanks ;-)

@PaquitoFo 4 жыл бұрын

The RZA thooooooo!

@xxscorpionxx7814 5 жыл бұрын

How much?

@Steve_10-31 5 жыл бұрын

A a a ah um

@chrisbrannen8091 5 жыл бұрын

To bad they're only made for 22 cal

@tawaitai 3 жыл бұрын

No they're not!

@jacksmith8002 5 жыл бұрын

who has a press like that laying around ?

@voodooquads 5 жыл бұрын

Harbor Fright does for $14.89

@voodooquads 4 жыл бұрын

Dio Black not really I prefer the roll pin. My solid pin came out of my ZEV.

@voodooquads 4 жыл бұрын

Dio Black and what push the solid one in with my finger? I used a punch myself on the Kinetitech roll pin and worked fine. I think the press could be for incompetent minds so they don’t push it in crooked or mark the trigger up itself.

@Custompro36610 5 жыл бұрын

👏🏻👏🏻👏🏻👏🏻👏🏻🇪🇸🇪🇸🇪🇸🇪🇸

@Custompro36610 5 жыл бұрын

👏🏻👏🏻👏🏻👏🏻👏🏻🇪🇸🇪🇸🇪🇸Impresionante!!!!!

@Custompro36610 5 жыл бұрын

👌👌👌👌🇪🇸🇪🇸🇪🇸

@ronaldrainero5579 5 жыл бұрын

*NY liberals heads explode

@ftswarbill 5 жыл бұрын

That intro music sucks ass.

@GPuga-ib2ng 5 жыл бұрын

And it’s 2019... time fly so fast...

@Jaggerr556 3 ай бұрын

And it’s 2024… time flies.

@jmlyrik12 5 жыл бұрын

Can it fit 556?

@TennisWorldSetPoint 2 жыл бұрын

Trying to find one for the 556 that's like .75 till the tip. But that's way thinner then the 22

@TomColontonio 6 жыл бұрын

Can these be pinned for New Jersey Compliance?

@scooterss2112 6 жыл бұрын

huh, no choice of sizes at checkout. I have the new version with threaded barrel.

@azdigbee 6 жыл бұрын

I don't get it.... What's the point ? (other than a waste of $)

@Ragnarok9139 5 жыл бұрын

Purely for looks

@tawaitai 3 жыл бұрын

purely cosmetics, but in neutered states it gives us the look of a suppressed rifle.

@al3x1252 6 жыл бұрын

Worst song ever!!

@MrNiceKnife 6 жыл бұрын

Please make this video again with a better view. I’m looking for a shroud for a g36 .22. I need one 8” long do you make one this size?

@dennismccool8760 6 жыл бұрын

Try not using black gloves. Obscured everything.

@teru797 6 жыл бұрын

What is the trigger pull weight.

@Pr0ph3cy-k5z 5 жыл бұрын

To change the trigger pull, get the ghost 3.5 trigger bar and spring kit. You can polish certain parts to make the trigger pull smoother, but that has no impact on the pull weight.

Ең жақсы KZbin

Пікірлер