Great older mower! I have one bought 5 years ago and have been mowing 4 acres with it replaced the deck belt drive belt and battery . Its built well has servicable hydros and grease zerks for everthing.
@whspioneer89Күн бұрын
Thanks for viewing and commenting. I had to replace the hydro drive belt when I got it and battery. It runs and mows well. It has aggressive tires on the rear. It’s not the most powerful drive system. Some people expect it to be like a skidsteer or bulldozer and it’s not. I don’t have any problem mowing moderate hills but I use both controls in unison to make turns.
@johnscreekmark3 күн бұрын
Those computer boxes for the 2.5L are hard to find. I got one in a junkyard…replaced the EPROM and my 88 runs like a top.
@whspioneer89Күн бұрын
Thanks for viewing and commenting. At the time I was able to buy a reman unit but that was a long time ago
@craigywaigyplays8 күн бұрын
My favorite John Deere series
@whspioneer897 күн бұрын
Thanks for viewing and commenting. This was my sisters. I took the video right after she bought it new.
@darwinspirithawkwhitt484716 күн бұрын
what year model is it
@whspioneer8915 күн бұрын
Hello. Thanks for viewing and commenting. I sold that engine shortly after posting the video so can’t answer your question.
@superrf8517 күн бұрын
Love it. Those old Simplicity's are bad ass. I would prefer an original engine but very cool but nonetheless an awesome machine.
@whspioneer8915 күн бұрын
Thanks for viewing and commenting. I’ve had this for about 20 years. It already had a replacement motor on it when I first got it.
@robertw531620 күн бұрын
Is that all???
@whspioneer8917 күн бұрын
Thanks for viewing and commenting. I was expecting a better result as well but the tree must’ve had too much roots
@jordancassells16523 күн бұрын
Can a Leyland 384 lift a power link box
@whspioneer8917 күн бұрын
Thanks for viewing and commenting. I’m not sure what you mean by power link box.
@johnscreekmark28 күн бұрын
I had a very similar problem with my “88. It took me a while, but I found a computer box in a junk 2.5…pulled the EPROM from the original and put in the replacement. It did solve all the problems. I also picked up a spare box because they are getting harder to find.
@whspioneer8924 күн бұрын
Thanks for viewing and commenting. I did end up replacing the computer to fix the problems as well
@Leelaa7Ай бұрын
Beautiful lilac 😊
@whspioneer89Ай бұрын
Thank you! 😊
@henrypatricktrampbarker1865Ай бұрын
I just found one. Runs great but I'm curious does the transmission have 2 gears or just one?
@whspioneer89Ай бұрын
Mine is a single speed forward, no reverse. A reverse mechanism as well as a variable speed mechanism were available as options I believe. Thanks for viewing and commenting.
@henrypatricktrampbarker1865Ай бұрын
@@whspioneer89 I found that mine is a 1952, # 917.57561. It seems to be at a pretty fast walking speed. I haven't attached anything to it yet. And I don't know much about it. I do see the 2 different size pulleys on motor side as well as to the transmission. If I moved belt from motor large pulley to motors small pulley, would this show it down? Makes sense to me of course but I just don't know anything about these .
@jameswaltz1661Ай бұрын
I had that same problem with the original blinker assembly. I couldnt get that clip on the outside to hold into the new grill. so i found that In between the 2 lights there is a tab, i drilled into and then into the back of the grill and used a couple zip ties to keep it tight. Kind of a cob job but it works and i didnt have to buy to buy a couple blinker assemblies. Before doing the zip tie thing i tried screwing with that springy tab by filing and using a screw but it would still pull out pretty easy. So out came the zip ties....lol
@whspioneer89Ай бұрын
Thanks for viewing and commenting. Some of these aftermarket parts just aren’t perfect
@mariosergiopeneluppi868Ай бұрын
Saudades de minha infância andava com meu pai de trator pra todo lado.
@whspioneer89Ай бұрын
My younger brother and I rode around with our grandmother on her Allis B in the 70’s. The big wide seat cushion on the Allis B came in handy for that.
@KollynJ2 ай бұрын
How long did it hold up? I had to do this on my old 03 as well except it was on a cat
@whspioneer892 ай бұрын
Hello. Thanks for viewing and commenting. The steel wool and furnace cement lasted about 2-3 months. It wasn’t my daily driver however. Drove it maybe 1-2 days during winter if snowing and when needed to pull a trailer. The patch cracked in two right over the hole. Top half stayed stuck to manifold and had to be chipped off. Bottom half was hanging by some of the steel wool.
@KollynJ2 ай бұрын
@@whspioneer89 Thanks for making it worth my time! Last time I did it I used metal and just used the cement as a sealant and had similar results but I like this idea
@lucianomartinez2142 ай бұрын
Lo usa para arar? Se consiguen los respuestos ahi
@whspioneer892 ай бұрын
I only bought this last year. I just disked with it
@lucianomartinez2142 ай бұрын
@@whspioneer89 ah esta bien.! Lo que veo no tiene lastre y tiene rueda fina atras.. El mio lleva rueda 24 5 32 atras y 4 pesas de cada lado q pesan al rededor de 70 kg cada una.. Y una pesa abajo de la panza ...
@loganbeedy59502 ай бұрын
That’s gotta be a bitch to get parts for
@whspioneer892 ай бұрын
Thanks for viewing and commenting. That would be an understatement. It was made at a Fiat plant in Argentina. However it seems like the parts don’t cross to even the Italian built Fiat tractors that I’ve been able to find. Maybe if I could read and speak Spanish and had contacts in Argentina might be able to find some NOS parts or a salvage yard to dig up a part or two.
@kathybabcock58022 ай бұрын
Yes please update to see how well it works, I might need to give that a try
@whspioneer892 ай бұрын
Thanks for viewing and commenting. Only been a week. Has worked great so far. You don’t get a huge amount in the little bottle. I ordered another one so I can make the repair a little thicker. About $9 per bottle.
@mattcasdorph2 ай бұрын
Bought a slightly used P3416 off Ebay about 7 years ago and it's a great little saw. Got tons of use out of it and it still runs great
@whspioneer892 ай бұрын
Thanks for viewing and commenting.
@hchickenz11382 ай бұрын
How long do the batteries last on the regular m12?
@whspioneer892 ай бұрын
Thanks for viewing and commenting. It really depends on how hard you use it. I can’t give you an exact minutes of use but I’ve never felt like the run time was an issue. Getting a larger AH rated battery is a plus however. Sorry I can’t be of more help.
@hchickenz11382 ай бұрын
@@whspioneer89 thanks
@resqdiver12 ай бұрын
Is that at full throttle? Great video!🤩
@whspioneer892 ай бұрын
Thanks for viewing and commenting. Full throttle
@lucianomartinez2142 ай бұрын
Tractor fiat de argentina!..
@whspioneer892 ай бұрын
Thanks for viewing and commenting
@jhonsmiththe6th2 ай бұрын
Oh my God this is the video that saved my life and saved the truck thank you very much you are a godsend I've been spending over months fixing this or trying to fix it figuring out what the hell is going on kept thinking it was the security but no error was it was these two ground wires or I've been spending over months fixing this or trying to fix it figuring out what the hell is going on kept thinking it was the security but nope here it was it was those two ground wires that you showed in your video I thought I cleaned the ground wires but I guess they're grounding something else out underneath on the frame let alone knowing that this is a used truck and whoever had it before had attached stuff to it thank you again❤
@whspioneer892 ай бұрын
Thanks for viewing and commenting. I’m so glad my video was able to help you out. I use KZbin myself a lot to help me with problems. It’s so rewarding getting a comment like yours. Thank you.
@jhonsmiththe6th2 ай бұрын
@@whspioneer89 yeah man no problem you're welcome you really did help me I was stuck on this truck trying to figure it out thinking it was the security getting new parts and s*** like that and here it was it was those two f****** things I didn't realize you were grounds I thought they were like some sort of relays or something and also I didn't see them until I seen your video so yeah thank you lol spinning like over a month trying to figure this crap out
@jhonsmiththe6th2 ай бұрын
Sorry it's getting late and I'm using text-to-speech I'm on my cell so it might be a little bit screwy what I said or what went down hope you can understand it lol
@donwatson58622 ай бұрын
So I actually have the whole tractor with the steering wheel and seat . Missin the engine . I thought we had a cycle bar mower that went on it . Been sitting on farm 50 years . Bringing it home to restore it ..not finding much about the actual ride on .
@whspioneer892 ай бұрын
I had this part for several years hoping to find the back half. Found a guy with a back half but he wouldn’t sell so I sold my part to him.
@Salo_dela_rosa093 ай бұрын
Can you help me, I have the same one as you but I don't know how to turn it on, when I plugged it in several zeros appear and it doesn't allow me to use the other buttons, they never change from zero. Could you help me maybe?
@whspioneer893 ай бұрын
Hello, thanks for viewing and commenting. Yours might be defective. I press the temp/timer button then +/- buttons to make setting, then Start. Or select the preset and +/- buttons to select preset program then start
@FSEVENMAN3 ай бұрын
LOL I didn't know they made these trucks without a tach,😮 that sucks😊
@whspioneer892 ай бұрын
Must’ve been part of a trim package
@pgh1all13 ай бұрын
I had the same issue but with the ground cluster on the left inner fender. I put a 6 contact bus bar in and sanded all contacts with emory cloth and just a thin coat of die electric grease. Also added a separate ground wire. This is a common and frustrating problem with 1st gen Canyons and Colorados.
@whspioneer892 ай бұрын
I thought about doing something similar if this fix hadn’t worked. Luckily it worked and has been working for 3 years
@ridermak41113 ай бұрын
kzbin.info/www/bejne/ppTGpnSLg9yZrZosi=n1_s_u9ta-2ShFXH I’ve got full arsenal of pulleys and winches but they are gonna sit lonely when I put together the four inch square steel tubing laying out back. This just made me smile. I’ve gotta try it. If a bit of a mess is not a problem, a pressure washer will expose the highest main roots. Sawzall to snip ‘em. 🤜🤛
@whspioneer89Ай бұрын
Thanks for viewing and commenting. Too far away from water to pressure wash the dirt away. My tractor has sprung a power steering leak in a hardline so I have to fix that before giving it another try with it.
@richardvincent77644 ай бұрын
I would have preferred the white l e d lights as opposed to the soft blue lights of these have. So I will be shopping for a different brand.
@whspioneer894 ай бұрын
Thanks for viewing and commenting. Most of these are still working. I took down 3 of the earlier ones I had put up just last week as they quit working and the solar panels all clouded over white. One of the panels fell off as well.
@loucifer42054 ай бұрын
I have the craftsman with the 3 speed switch
@whspioneer894 ай бұрын
I got this one on sale at Lowe’s for about 35$. They were having big discounts on the Craftsman V20 brushless models just before the Craftsman V20 RP models came out.
@VC-TV4 ай бұрын
This gun isnt ideal for lug nuts, you would want to use the 1/2 impact for bolts or nuts of that size, this gun is good for smaller nuts and bolts, i would say 17-18mm and below, it will take fresh lug nuts off but not ones that have been sitting for a while,
@whspioneer894 ай бұрын
Thanks for viewing and commenting. I have a large Bosch 1/2” impact wrench 18v that I normally use for lug nuts. I was just testing this and the ones in my other videos to see if they could do it in a pinch.
@twricicar4 ай бұрын
I am so glad to come across this video saved us money. Have 2010 GMC Canyon that was throwing fault codes and the dash cluster would go blank when driving. Took to a dealership and they said we needed a new EBCM that they don’t make anymore. Options were to live with it or get EBCM reworked. While doing research found this video. After taking the ground off and putting back on it all cleared.
@whspioneer894 ай бұрын
Thanks for viewing and commenting. I’m so glad to hear my video helped you. I use KZbin videos a lot myself to help me fix things as well.
@rafofc2871Ай бұрын
Will you please share exactly which ground wire you took off and put back on? I'm curious to know.
@JJ-xf4mj4 ай бұрын
Thats not cool
@brendaann7274 ай бұрын
He's doing a fantastic job! 👍🏼👍🏽👍🏾Many people don't realize cats do thier own kind of guarding. If you pay attention to thier countenance, they will alert you to activity or someone approaching. I feel guarded if I walk with my cats at night or in woods.🐈⬛
@whspioneer894 ай бұрын
Thanks for viewing and commenting
@robbinparker43824 ай бұрын
Nice! Ever shoot a daisy 188?😜👍
@whspioneer894 ай бұрын
Thanks for viewing and commenting. I haven’t shot a Daisy 188. When I was a kid the only BB gun I had was a Daisy lever action that you poured the bbs in by the muzzle after turning the end cap. My dad bought it for me in the late 70’s the day he took me to the hospital to get my tonsils taken out. My brother and I had a lot of fun plinking with it. I didn’t get into bb/pellet guns until about 5 years ago. Just happened to see a video by mixup98 about co2 bb pistols and thought that looked fun.
@Gugernoot4 ай бұрын
Heavy discs are kinda like a one way but they are a constructed like a harrow, neat.
@whspioneer894 ай бұрын
Thanks for viewing and commenting
@matthewcharles69914 ай бұрын
Thanks man! Looking at this to start my Case 585.
@whspioneer894 ай бұрын
Thanks for viewing and commenting. I guess Ryobi has come out with a similar tool battery device.
@LygerTheCLaw5 ай бұрын
more toxic trash in our landfills from china and more money in bezos' pocket to put fuel in his titanic sized yacht.
@rabiabaloch61115 ай бұрын
hi...please more of this and snow cleaning..thanks
@whspioneer895 ай бұрын
Thanks for viewing and commenting. I’ll do my best.
@Guns_N_Gears5 ай бұрын
Some really log zip-ties threaded though hex nuts would do the same thing for less
@whspioneer895 ай бұрын
I’ve used bungee cords in an emergency before and they worked a lot better than these brittle plastic straps
@kathybabcock58025 ай бұрын
Good to know, I won't waste my money on those
@whspioneer892 ай бұрын
Too many wastes of money out there
@cars6545 ай бұрын
Funny I used to think timing belts were junk. But now you see timing chains that look like they came off of a children's bike. Also gone are the days of non interference engines !
@whspioneer892 ай бұрын
Buyers have to find out before the purchase if the engine is an interference engine. Dealers and manufacturers aren’t going to disclose that on their own
@kyrareneeLOA5 ай бұрын
What model?? is it efficient?
@whspioneer895 ай бұрын
Hello, thanks for viewing and commenting. Sorry but I can’t help you with your questions. I’ve sold that heater. I kept a couple smaller ones. They are all rated for 1500 watts.I have a watt meter I probably should do some tests
@SailProMarina6 ай бұрын
Can you Please Help me identify a Farymann Diesel I just acquired. The tag shows 20 e 3658 how many hp ? what exact is it ? It has a starter and remote starting panel thank you
@whspioneer895 ай бұрын
Hello, thanks for viewing and commenting. I did a search for those number but nothing came up. How many cylinders is it? Sometimes I’ll do an online search then switch to images and look for an image that resembles what I have. You might give that a try.
@SailProMarina5 ай бұрын
@@whspioneer89 I tried. it's a 1cyl
@chucknrun236 ай бұрын
Ya my left turn signal lights up when i hit the brake. Im also having the issue with the dash not lighting up sometimes at night. I got pulled over last night and the cop said my turn signals in the rear weren't working either. After he helped me field test it, they worked as long as i didnt hit the brakes, but when i hit the brakes the lights seem to dim and flash together. I also have the 07 Colorado.
@whspioneer895 ай бұрын
Thanks for viewing and commenting. Mine first acted up at night as I was going to work. All my dash lights went black. Heater shut off. Luckily engine didn’t die. You might have a grounding problem as well. At least for the tail lights not working all the time.
@chucknrun235 ай бұрын
@@whspioneer89 figured out that the harness to my trailer hookup had a break in it. Fixed the broken wire, everything works fine now.
@ketaminefetishist6 ай бұрын
I'm far from a stumping expert. For some reason the algorithm keeps recommending these videos. From what i heard, wetting the stump the night before replicates conditions from a hard storm, and makes the soil easier to pull from. Good luck, fuck that stump up.
@whspioneer896 ай бұрын
Thanks for viewing and commenting. Stump is still in the ground as I got busy with other stuff then that tractor sprung a power steering leak that I need to fix. But I’ll give your advice a try.
@joseguadalupealmeidarodrig65436 ай бұрын
Eres un gran amigo tengo una camioneta como la de usted y tengo muchos problema s con las mangueras de vacío se repara en general y ya no se sabe cómo van conectadas si hicieras otro video como el que está en redes pero más lento y como esta en el cuerpo de acelerador es im por tante pa ra mi y otros q
@whspioneer896 ай бұрын
Thanks for watching and commenting on my video. Sadly that truck has been gone for years so I can’t help you any further. Best of luck fixing yours
@jamisonturner92846 ай бұрын
4000 dollars Ives spent paying for things being replaced and this was my issue the entire time
@whspioneer896 ай бұрын
Thanks for watching and commenting. That really sucks. It’s taken me some time but I’ve learned to always start with the simple items first. Like grounds. So many electrical problems start with just having a bad or inconsistent ground.
@yaykruser6 ай бұрын
Im still waiting for you to pull that stump out 😅
@whspioneer896 ай бұрын
Hello. Thanks for the comment. That’ll have to wait till spring.
@chardenner31476 ай бұрын
Thank you! I'm getting ready to replace my headlights and turn signal lights and I have never done anything like this before. I appreciate knowing what could happen and how to work around it.
@whspioneer896 ай бұрын
Thanks for viewing and commenting. I’m glad I could help.
@chardenner31475 ай бұрын
@@whspioneer89 - just letting you know, I had no problems at all but I was so glad to be prepared, just in case. Happy New Year!
@buttcrack77846 ай бұрын
The distance between the tractor and the tire is too short. Lengthen that distance and the pull vector is more favorable.
@whspioneer896 ай бұрын
Thanks for watching and commenting. Thanks for the tip as well. I used the chain I had handy. This tractor is supposed to be rated at 120hp and I think 10000 lbs. it barely budged the stumps.
@killingtime111111166 ай бұрын
When I bought mine the dash wasn’t working but after working on other things it just magically works now
@whspioneer896 ай бұрын
Thanks for viewing and commenting. Yours could have an iffy ground as well. If it happens again you can try the common grounds on the fenders like I did.