Jules Wrenches

Пікірлер

@petecalderon9229 Ай бұрын

It would have been nice if u had shown a side by side of the old and new 111 upgrade cam to show the difference between the two.

@allthekidsareright Ай бұрын

Woah! Are you a dealer tech? I’d bring my bike there.

@juleswrenches909 Ай бұрын

@@allthekidsareright lol yes I was working for an Indian dealer at the time of recording.

@Dogechuu Ай бұрын

Damn, missed the stream by an hour. Gotta love technical difficulties though😆

@dezjones1784 2 ай бұрын

My local Indian dealer wants $475 for this.

@BareBottom 6 ай бұрын

Hello Jules, as I need some insight, As I have a 2018 Indian Roadmaster Elite, With Big Bore Kit/Ported & Polished/Tuner/Dynoed/Pipes/Breather/Rekluse Clutch/with a lot of performance parts done by Indian, The fork seals appear to hold up on this bike OK, but I Live in The HEAT Of Texas, and we endure a lot of very rough roads, dusty, and a lot of bugs. On top of all of the Kinks I put on my Front end I also pull my custom dog trailer. So what name brand performance Seals do you recommend replacing the stock ones with and which name brand fluid and what weight? This bike I need the best name brand seals & Fluid? which do you prefer? I also have another 2019 Indian Roadmaster Elite, With Big Bore Kit/Ported & Polished/Tuner/Dynoed/Pipes/Breather/Rekluse Clutch/with a lot of performance parts done by Indian, and this one has a DMC Side Car with a Custom Dog Trailer. I have SMOKED at least 5 clutches, Fork seals have been replaced a couple of times with only 22,000 miles on the bike now

@AntiPattern328 7 ай бұрын

So, with such amazing tooling on all the parts, WTF were they thinking with teflon chain tensioners??? Tell me I'm a moron... The only stupid question is the one nobody dared to ask!!

@Ve2ret418 7 ай бұрын

Very nice video thx 😊

@jegsloken229 7 ай бұрын

Thank you I’ve been fitting this dam box for 30 mins

@willkearney5002 10 ай бұрын

Hey friend, great vid. Where are you located?

@Caine6581 Жыл бұрын

Thanks for the awesome tutorial. How many parts in this did you replace?

@TheDude42098 Жыл бұрын

Nice video

@robertminer1503 Жыл бұрын

Great video. Where can I buy those tools from. I got the link for the one.

@FlashOnTwos Жыл бұрын

Can you tell me where you purchased the fork leg holder/clamp? Model number, etc.? Thanks.

@oracledbaoracledba9754 Жыл бұрын

what size seal driver for the 111 thunderstroke? (If it matters mine is 2016 Chieftain)

@kbar4883 Жыл бұрын

Did you say K & L fork clamp and holder. I'm having trouble finding g this. Any help?

@juleswrenches909 Жыл бұрын

After I did my own research to find that clamp since it was provided at that shop I was working at. It was a bicycle stand made by Park Tools. So if you contact Park Tools you’ll have better luck finding the clamp.

@andreystepanov7597 2 жыл бұрын

Как красиво внутри. Хорошая работа.

@enrico1856 2 жыл бұрын

I didn't know indian was chain drive, I thought it was gear drive like harley Evo

@mehmetyuncu5899 2 жыл бұрын

whats the total amaount of fork oil u put in?

@bradfinken 2 жыл бұрын

Where are you located? May have you do my forks if not too far

@snowboardtim 2 жыл бұрын

Do they make this kit for the Indian challenger?

@juleswrenches909 2 жыл бұрын

Yes they do. Challengers are over head cam, so way different of a procedure.

@mikecuthbertson1130 2 жыл бұрын

2016 Scout, fork seal replacement. Having trouble getting the bottom drain bolt reinstalled. The inner piece the bolt threads into isn’t going low enough for the bolt to reach. I’m following the manual but wondering if I should put inner piece in before I install the strut tube

@shanthsp2002 2 жыл бұрын

I should learn repairing Indian motorcycle engine, replacing parts. We have scarcity of service centers here in INDIA, It will be great to learn so that I can do my own repairs when needed. after all we should know every detail of what we are riding.

@imerani 2 жыл бұрын

Thank you for this excellent video. I have a 2020 Roadmaster with almost 15K and 10 months on the road. I've read the factory manual and the procedure is exactly as you shown. Now the problem is I only need to change the oil and the way to measure the level is without the top part of the cartridge. I don't have the special tools so I was thinking of removing the oil from the top and measuring how much comes off, then putting back in the same amount. Another option is measuring the height with the cartridge. I'm also considering going to 30K with the same oil since I've reading comments that at 15K the oil comes out clean.

@paulcarroll6805 2 жыл бұрын

What is the best method of getting to the upper fork pinch bolt without removing fairing. I tried a extended box end ratchet wrench with a torx bit, but still too big to get in there.

@RLH1510 3 жыл бұрын

Just purchased the stage 1 air intake. I really can't see how it is filtering any air??? Air enters in the hole in the front and goes directly into the throttle body. Filter sits on top. Weird????

@ursg9910 2 жыл бұрын

Air is sucked into the air filter on top than into the engine that how it works that’s how the air is filtered prior to being introduced to the engine

@codysomers3763 3 жыл бұрын

Such an informative and concise video. Thanks for uploading. I have little experience with Indian but I have a friend that claims their 15 scout needs “A” head gasket. You said you have to drop the motor if the pushrods fall down. I assume that means for a head gasket the motor has to come out?

@Don2006 3 жыл бұрын

What's your take on Indian's 2-yr/15k fork oil interval recommendation? Too frequent? I was going to DIY, but the service manual doesn't specify the fill level (we have a 2018 Scout Bobber & a 2020 Scout). But it looks like you do a really thorough job, and if you're at the OC dealership, I'd probably be happier taking the bikes in!

@hrobertb 3 жыл бұрын

How would you know if you're having an air leak?

@juleswrenches909 3 жыл бұрын

Great question. Usually you can hear it even at an idle, and you’ll get some pops on decel. It’s really obvious when installing if you double check the seal on the throttle body before going back together.

@richardpaulik8555 3 жыл бұрын

Great video Jules. Can you tell me what size the cartridge shaft tool (PV-49452) is that is used to hold the cartridge to remove the retaining bolt? I have not been able to find that tool so I need to make one to get me by until I do. Thanks!

@ut1004bp 3 жыл бұрын

Buying the alignment tool, and re-sale after you are done helps takes the sting out of the cost. I'm wondering the difference between Llyodzs 558 and the Indian Stage 2 cam?

@VikingBagsYT 3 жыл бұрын

Great video! Loved the content! Keep up the good work!

@juleswrenches909 3 жыл бұрын

Ty so much!

@andywatts7130 3 жыл бұрын

i wonder what it cost to have them changed at a dealer

@shoomapadoo1141 3 жыл бұрын

First time you mentioned timing marks was on the reinstall. Why?!

@juleswrenches909 3 жыл бұрын

Great catch, that honestly could’ve been a mistake where I didn’t mention it (I always time before disassembly). Luckily if you’re setting the timing correctly going back together it shouldn’t be a problem, UNLESS the crank slips while installing. Which in my experience hasn’t happened yet.

@AndoBMS 3 жыл бұрын

Does the stage 1 add power? I have an Scout sixty bobber on order from your dealer and want this filter installed

@juleswrenches909 3 жыл бұрын

Indian claims a 5% increase in horsepower. And after riding a lot of bikes before/after I’d agree with that number.

@AndoBMS 3 жыл бұрын

@@juleswrenches909 sweet. Is there an actual performance tune from Indian or a PV3 is the way to go? I was told for much cheaper I can make the sixty as powerful as the 100hp version

@j2151law 3 жыл бұрын

🔥🔥🔥🔥

@kweenikki 3 жыл бұрын

What type of spray/lubricant did you use ? !

@juleswrenches909 3 жыл бұрын

We use a spray called “Pig Spit” as a general all purpose lubricant. Mainly for rubber mounted stuff so it slides on easier.

@mono91351 3 жыл бұрын

Great tips thank you!

@SuperJmur 3 жыл бұрын

What all exactly does this cam upgrade do?

@spectreboy55 3 жыл бұрын

I'm sure this is a silly question, but what you showed here is it the same procedure on a 2017 Scout ABS or is inside the cam cover totally different?

@juleswrenches909 3 жыл бұрын

So the Indian 111 and 116 are both pushrod engines with the cams down lower. All the scout engines utilize a cam over head design. So cam replacement on a scout is ENTIRELY differ procedure than this. 👍🏻

@spectreboy55 3 жыл бұрын

Thank you.

@indyvin1622 3 жыл бұрын

Any idea where I can get the cartridge shaft tool or something comparable?

@focalpointeservices1529 3 жыл бұрын

what can you use instead of the Cartridge Shaft Tool

@bknibb6591 3 жыл бұрын

Dude, 2 comments: 1. Truely awesome video and tutorial. 2. NOT doing this job by myself. Though I'm quite handy and CAN perform this maintenance, I ain't gonna. Don't have the cool-tools you gots. Thanks for a very, very good video.

@juleswrenches909 3 жыл бұрын

Ty so much for watching! Haha ya if you want it done by “factory specs” there’s a fair amount of specialty tools involved. Thanks again!

@chrishemenway2827 3 жыл бұрын

so i have had 0 luck obtaining any tooling from Indian. What size impact would I use in lieu of the cartridge shaft tool?

@Jonathan-L 3 жыл бұрын

A question relating to 4:30 ... are the cams that came out of the engine the originals? I see that they have the centrifugal decompression mechanism (like S&S Easy Start cams), and I wasn't sure if they were standard or not.

@juleswrenches909 3 жыл бұрын

Yup, good catch. They’re the stock ones.

@Jonathan-L 3 жыл бұрын

@@juleswrenches909 Thanks for the quick reply. My knowledge of Indians is zilch, so I've got lots to learn. Who invented the decompression style cams first? Indian? S&S? Other? Has the idea been around long? Just curious :)

@jamesspencer406 3 жыл бұрын

Indian just availability upgrade cams for Challenger, which I own.Thinking on this but squeamish opening engine .Good work tho coming from engine machining at Honda this no job for careless

@MrBburdick 3 жыл бұрын

I wonder what the cam specs are on stage 2 Thunderstroke engines? Nobody ever says. I have a '19 Chieftain with these and was just wondering..

@juleswrenches909 3 жыл бұрын

Ya I’ve never looked into it. But I’ll see if I can find out for ya. Thanks for watching!

@adiobracy4272 3 жыл бұрын

Great video! I’m looking to purchase a Indian chieftain from Copart soon and fix it up. Will this be a very expensive task for me? Trying to get a gauge on what I’m bout to get myself into.

@juleswrenches909 3 жыл бұрын

Doing fork seals isn’t expensive as far as parts go. Its just isn’t the easiest job mechanically and takes a good amount of time. But it definitely will be cheaper to do it yourself than having a dealer do it, and only because of the time it takes. I think we charge around 4 hours total, around 450$ bucks just for labor.

@mostlycrue 4 жыл бұрын

Great video. Music is a little funky.

@antonioperalez7375 4 жыл бұрын

What size cams are these?

@1YouTube_you 4 жыл бұрын

Couldn’t you have just put the bike in 1st gear Instead of a strap to keep the engine from spinning so you can torque the cam sprocket bolts?

Ең жақсы KZbin

Пікірлер