Yeah sure! Tell me your specs and ill try to help you!

FYI my main problem is, it just wont shoot good, some bbs are overhopped, some fly straight, some dry fires and so on, i already cleaned barrel, used another bucking and tensioner also tried different mags, but yeah problem stays so i think it might be the settings? Currently using G&G Green with Omega Nub , standart hopup chamber

Damn- i would check alignment first tbh

Semi- dP- 6ms Main Valve pause - 1ms dn - 14.5ms Nozzle valve pause offset - 1ms auto dP - 4ms Main valve pause - 0.1ms dn - 11.5ms dr- 1ms

Just a small 7.4v 600mah 20c battery

@ have you tried the Titan hpa battery? I have2 of them and my engine shuts off on full auto. Also have two different pulsar d engines. Same on both.

Nope. Just normal lipos

Hell yeah

Just a small 600 mah 7.4 deans lipo

Didn’t have working replicas at the time

Some people just underestimate how amazing the odin is, and keep using those $1 Speedloaders for their $1000+ replicas lol

@@WeightlessAirsoft very true

I custom made it🔥

It’s cut out like that for weight reduction, but it would be pretty goofy in a real steel gun😂

Im at around 40, and my settings are- dP - 4ms Main valve pause - 0.1ms dn - 11.5ms dr- 1ms Hope this helps :))

@@WeightlessAirsoftThanks so much man, i really appreciate it

@@microwavevr114 just so you know i use different settings for full auto and single 🪑

misalignment in nozzle, a torn/misaligned bucking, twisted/squished igl, incompatible/broken hopup unit

Aight, also my pulsar d shuts off on full auto and binary, anything with higher rps . Why would this happen ? Full charged battery and calibrated pulsar d

And when I change mags it shoots 200 fps for 100 shots or so then goes back to the inconsistent 340-360fps what would cause this ?

I would contact gate- i have never seen such a issue, and they are incredibly supportive and will help you out right away

For this i would suppose an extreme case of mid cap syndrome- caused by a badly mounted engine, or badly working hopup Either engine is badly mounted and nozzle is pushed way up because of the mag bb tension, which may cause insane inconsistencies and basically no airseal, or a hopup which is crooked, that can also cause similar problems

Told you in your other comment :))

Yeah sure! What problems do you have with it?

It’s an offbrand trijocon rmr, as for the mount its vector optics MOJ mount 🫶

Ostatnio waliłem z ręki na zmierzone 50 metrów w cel mniejszy niż kartka a4 8/10 razy przy mocy 1.14j na 0.30g

A celnie to nawet do 80/100 metrów przy dużo cięższych kulkach i dużo większej mocy

1700 dollars

Yeah about that

It’s custom fully made by me- call it whatever you want ❤️

Retro arms :))

@@WeightlessAirsoft thank you!!

No, but i have a protector installed❤️

Yeah i do- do you want it?

@@WeightlessAirsoft yes please

Base- king arms tws limited edition skeleton Internals- polarstar f2, mac airsoft hpa gearbox, blackleaf trigger board, maxx hopup, 275mm pdi inner 6.05 barred, mac airsoft carbon 10.5” outer barrel, and mac airsoft speedsoft stock, pts epg-c pistol grip, pts centurion arms 9.5” rail, maxx externals(trigger, mag release) retro arms charging handle I think thats all lol

Inferno is a single solenoid engine, meaning it’s overall worse then both F2 and Pulsar D, but its one of the best single solenoid engines- when set up correctly it can compete with both of them, but pulsar D and F2 are more versatile and have more functions and are more air efficient.

Second lol

I did- check it out Max possible is over 70, but stable is around 40

LOL😂 exactly. Quick airsoft meter calculator is 6 airsoft meters= 1 meter

Well, it’s much easier to change settings, as well as a built in chrono

187mm :)

the hpa line**

I did it in my workshop- took a polarstar fitting, drilled a hole in my grip, glued it with strong glue, made the fitting round, to fit a circular hole, and cut the original 6mm air tube to length

@@oliversmith5658redline also makes a kit to do it

Check out my other video, with parts list, and overview- if you’re asking about a tutorial its pretty straightforward- if you have any more questions feel free to ask :))

Both are great, but if they cost the same (pulsar d and titan 2) (polarstar f2, with stock fcu) i would go for the pulsar

Polarstar F2 of course, the gate has done some shit with their hpa

Such as? Pulsar S had problems, not D

It’s 191mm, or just 7.5”🍤

But im workin on a custom hpa dmr

Hey check out my first overview video- all the parts are listed there

Everyone has their own opinions🤷‍♂️

Nope :)) Thats a whole newly designed and developed engine by GATE :) F2 is from polarstar🤌

Glad you like it!💪

Well have you watched the video 😜 Its certainly NOT, and in some situations beating the f2

@@WeightlessAirsoft what situations? F2 is much more durable system. F2 + Titan is much better. PulsarD is trash.

@@WeightlessAirsoft i've got both, F2 with Titan2 and pulsarD. I shot more then 50000 bbs on my Pulsar, and i know what i am talking about.

@@lynchairsoft9091 i also own the f2 and the pulsar, and i feel like the pulsar is much more „responsive”, and for cqb i would always go for the pulsar. I have incredible consistency right now ( around 1fps deviation max) and its really air efficient, - 1.14j on a sub 190mm 6.05 barrel on 75 psi. Also the small form factor makes it an amazing choice for any non standard gearbox replicas, like the mp7 or even some aeps Don’t get me wrong the F2 is amazing, but as i paid same for the f2+ fcu, and pulsar+ titan, the pulsar+ titan is a much better choice imo

@@WeightlessAirsoft say hello to the returning tappet spring one day.

HPA‼️🙌

I’ve tweaked them a little but now works even better then before📈❤️ Semi- dP- 6ms Main Valve pause - 1ms dn - 14.5ms Nozzle valve pause offset - 1ms auto dP - 4ms Main valve pause - 0.1ms dn - 11.5ms dr- 1ms Hope this helps :))

Thank you very much !

@@harryco978 no problem! Check if it works for you, and feel free to ask any other questions!

This feeling never changes lol- Hpa brrt always brings chills on the field

Dropping a shooting video this very moment!❤️

Hey! I had misfeed issues only if i messed with the engine settings too much, otherwise its perfect :))

Thanks, will do!

Well pulsar D being closed bolt, and dual solenoid is insane for consistency and air consumption. Also what suprised me was the rps output i managed to get- on the app i got max 100 but highest i tested was 45 and i know it can go higher. Also GATE support is insane- any issues i had were quickly resolved with the CEO directly helping me on discord and offered me sending the whole replica for checking the issues out :))

Can you tell me psi and settings you have in Titan for the pulsar?

@@STEPemek hey i use the standard pulsar D setting and 105 psi :)

@@WeightlessAirsoft That sounds like you had loads of issue and even the CEO of the company had to step in and try resolve them with you, and had to send out another gun for you to try resolve it. I'd have been much happier if you had said "I had no issues"

Great looking build. I’ve installed a lot of HPA engines and the Pulsar D is by far my favorite HPA engine out there in all aspects.