Thanks for the helpfull and clear information.🙏🙏🙏💚

Nice video, I am surprised by how easy it is to remove the covers and do a !ight service and oil. My local dealers all charge over $ 300 for this service.

Thank you!

Amazing how this vdo explained my issue clearly ❤❤❤

Thanks for explaining the difference.

Wonderful! Dialogue and transcription are more helpful than video. Pity your father wasn’t a glass maker … but the green shirt is interesting.

One of the screws in mine came out i think the one that holds it together because the metal piece came out idk what to do

My screw has green paint. How do you remove it?

Thank you!!!

My thread cutter arm won’t move. When I push the button it doesn’t seem to be making contact maybe. Any suggestions. I have this model.

Actually, the screw which holds the embroidery arm connection is a T-15 and by the way, thank you for the information on how to get the manual for this unit. I have been able to keep our running and doing its job. I still think the Designer 1 is the best, the most dependable Viking unit they have made for some years.

Can the hook screws be accessed without opening up the machine if the timing is off??

Thank you video helped a lot 😂🎉

Just at the difficult bit, you blocked the video with your hand! Thought this was going to be a good one but it wasn't!

Being new to Berninas, I have a question. When I first turn on the Activa125, the needle makes a noise and vibrates back and forth. I think the machine is calibrating itself. Then when I step on the foot controller. It makes another weird noise near the bobbin/shuttle area of the machine but sews just fine and makes no more weird sounds until I switch off the power and then switch it on again. Then upon turning on, the needle wobbles back and forth and again the foot controller makes a weird sound again. I think I understand the needle part but is the noise with the foot controller normal? Thanks for explaining the step motors in this video.

Thank you so much! I was having a very hard time 🥲

Interested in a new machine but reading Husqvarnas aren’t worth the money due to so much plastic. They break easily. Is this true?

S girl knows her stuff!

It’s not 8 years it’s over 80 years

Hello, is there a video showing how you removed the front cover?

Why is that screw covered in orange glue or paint in my new singer heavy duty 😢

Your hand moved in the way just when I needed to see. Also, I'm not sure that my needle, eetc. is in the correct position. Some guidelines for the setup would be greatly appreciated. Thanks!

Does this work for 930 sapphire Viking?

What’s a broken housing on this type of machine?

I like how it literally doesn't solve anything LOL, is there a follow up video, this one solved nothing

Thank you for making/posting this video! It helped immensely! 🏆

Thanks so much for showing how to adjust the bobbin tension. Fixed my problem 🙂

Your thread seams thick to me! What size is it

Viking replacing the needle clamp? There is a small piece called Gib , I can’t find anything on this subject.

Thank you

I couldn’t tell which way to turn.

Thank you for explaining so clearly about the difference between a DC motor and an AC motor (esp when sewing slowly).

Thanks! Your video is much more helpful than the manufacturer's video!

Okay well, turn screw left or right? Turn left for tighter tension? Turn right of loose tension? Maybe you said it ...I didn't hear?

Would this be the same for the Bernina 730?

Hi there. I have an old 830 Record. Broke a needle today, and now the bobbin is jammed. I dismantled the bobbin case, thinking it would be straightforward, removed the broken needle, but the machine is still jammed. I'm trying to find your video on the Bernina bobbin case. Can you please point me to it?

you have saved my life. god bless.

Do you have a video for adjusting the pressure foot bar height on the Husqvarna Viking Designer SE?

Mine keeps popping up by itself. How can I tighten the latch so that it stays down? (Yes, it’s clean!)

Thank you for this video! I’m attempting to fix my niece’s singer 5705c that went out of time when she tried to sew heavy material. Unfortunately, I loosened the needle bar in my initial attempt because the needle, though properly seated, was catching on the metal case. I now understand that it is supposed to go low enough to dip into the open space when properly timed. I don’t know where to start, now that both the timing and needle bar are out of whack!

when checking the tension I always use a different color thread in the top and bottom

so glad i found this, I have a Janome S5 and I just had it in the shop for this very problem! they charged me 100.00$ and did not fix it! this machine is not my favorite, always problems and it is brand new.

Is it available in Qatar

How much does it cost?

You just saved me a lot of frustration!!!!

Bonjour j'ai une machine Gritzner 1035, le ressort du système idt pied double entraînement est cassé, pouvez vous me dire comment le remettre, petit rochet en haut ou en bas et à quels endroits l accrocher ? Merci beaucoup pour votre vidéo

Thank you!! I was struggling with the hook Your instructions save the day (and my happy sewing) for me.

I wish your video was longer 😭

Omg can I get machine even though ion got that kinda money for that machine I love sewing and embroidery

WOW!!!