How To Replace Mini Cooper Wipers
3:21
How To Change Oil On 2016 Jetta 1.4L
8:12
Mini Tour Season 2 Preview
1:01
5 жыл бұрын
Mini Tour Season 2
0:33
6 жыл бұрын
De-Badging The Trunk
4:31
6 жыл бұрын
We Start The Mini Wrap
7:22
6 жыл бұрын
Пікірлер
@sk8guitardrums
@sk8guitardrums Ай бұрын
This is one of the best and well documented videos on changing engine oil for this car. thanks for the video
@LittleBear-m4s
@LittleBear-m4s 3 ай бұрын
Where do I buy the giant socket to remove the filter housing?
@abouthomeopathy101
@abouthomeopathy101 3 ай бұрын
Thank you! Very informative, I could easily change all three wipers myself! For anyone who might be interested for this information, this is 2024 and it concerns my mini cooper F56 (2020 - European left hand drive car) and I bought Denso Wiperblade Hybrid DUR045L (45mm / 18") and DUR048L (48mm / 19") for the front wipers (18" driver side, 19" passenger side - L stands for left hand drive, for right hand drive cars it would be an R) and Bosch H240 (240mm / 9") for the rear (equals Denso DRD-003, which was unavailable).
@RP4UXO
@RP4UXO 4 ай бұрын
Those parts seem exorbitantly expensive to me. I'll have to forgo getting a minicooper.
@smvckerz519
@smvckerz519 4 ай бұрын
All in, if you reuse the oil filter tool, you’re only gonna use about $20 - $50 on oil, and that’s it.
@moniinnola
@moniinnola 4 ай бұрын
What! Thanks for this. I'm so confused why when I call certain places for oil changes traveling the U.S. some will literally tell me "a mini coopers oil change is too difficult." This video shows its not that serious to do at all! After a recent visit to one place in D.C., I realized they say this when they don't have the filters to replace in the car. Some mechanic places are seriously ridiculous.
@CalyptusCity
@CalyptusCity 4 ай бұрын
Thank you for your help, how many liters you use for the Mini F56 B48 Engine?
@jorgesalinas6697
@jorgesalinas6697 5 ай бұрын
Worse advice to jack-up the car. The correct way is always pick it up from the lift points/pads and always put a jackstand under..
@OPRevill
@OPRevill 10 ай бұрын
Buen video, no encontraba a que torque lleva el tapón, gracias
@oceanthirteen1628
@oceanthirteen1628 Жыл бұрын
Thank you
@charles-fg7el
@charles-fg7el Жыл бұрын
Hello J , have you got the part number for the oil change kit ,please
@jssdgarage
@jssdgarage 6 ай бұрын
We have listed parts and tools in video description. Keep on Motoring!!
@antmax
@antmax Жыл бұрын
Good video. I just wish these cars had a dipstick, much better for piece of mind. I noticed the race cars are modified to have a dipstick.
@ayaitsjacob
@ayaitsjacob Жыл бұрын
Some straight up airheads in this comment section, I have this make and model. 135,000 miles in and I've always used 5w-30. IF you dont know what you're talking about be quiet
@salvadorsalazar6847
@salvadorsalazar6847 Жыл бұрын
Hi I'm confused regarding the oil. I recently bought this car model and change my oil. Before I changed oil, the car reached 40 MPG every time, and after I put the MOBIL 5W-40 European formula, it got down to 32 MPG. Do you know why it is happening? Any comment is very helpful. Thank you in advance.
@jssdgarage
@jssdgarage Жыл бұрын
Although you have the same winter viscosity. Your warm viscosity is thicker. Thus working the engine harder and consuming more fuel. I would recommend 5w30 oil.
@minjiec
@minjiec Жыл бұрын
Thank you for your instruction! I just did it, after purchasing a pair of wiper blades from ebay for $17, tax included. Not OEM and will see how well/long it works.
@Mafiatorte
@Mafiatorte 2 жыл бұрын
Thx
@rsw9480
@rsw9480 2 жыл бұрын
Why wouldn't use the Jacking Pucks installed on the car to prevent damage ??
@jssdgarage
@jssdgarage 2 жыл бұрын
Because then it wouldn't be able to put jack stands on those points. Its always easier with ramps, or a low profile jack to use the subframe as a jacking point
@bx16v
@bx16v 2 жыл бұрын
A smear of oil round the o-ring before installation is good practice
@jssdgarage
@jssdgarage 2 жыл бұрын
The torque rating is for dry threads.
@bx16v
@bx16v 2 жыл бұрын
@@jssdgarage not talking about the torque rating - generally you'd smear oil on the oil filter housing o ring, or the seal directly on the canister if it is a metal type - it prevents the possibility of an install related tearing or moving, and also prolongs the life of the oring and integrity of the seal. Some people use rubber grease, but a drop of the old oil smeared round it works too.
@jssdgarage
@jssdgarage 2 жыл бұрын
I believe by nature of the canister design it probably would mess with the threads and torque rating. But probably not, might be something to relook at in the future
@chrispig7748
@chrispig7748 2 жыл бұрын
Mine are different fitting on my 2012 Olympic mini 3 door
@jssdgarage
@jssdgarage 2 жыл бұрын
This video was specific to 3rd gen Minis. We'll try to refresh with a video that covers other generations. Keep on Motoring
@chrispig7748
@chrispig7748 2 жыл бұрын
@@jssdgarage thanks
@truthlove1114
@truthlove1114 2 жыл бұрын
Thank you. Ours needs new blades and hoping to save money by doing it ourselves. Great video series!!!
@truthlove1114
@truthlove1114 2 жыл бұрын
This video is going to come in handy. Thank you for posting!!!
@truthlove1114
@truthlove1114 2 жыл бұрын
Great video. Very thorough. Thank you for being detailed and listing the model numbers!
@ghenzz
@ghenzz 2 жыл бұрын
when is the next meet
@jssdgarage
@jssdgarage 2 жыл бұрын
We are projected sometime July You can check out our official page At www.californiaminiclub.com Along with any of the other social media accounts of the club
@CAPTAINOKIN1776
@CAPTAINOKIN1776 2 жыл бұрын
Thank you! Been searching for a good video so I can do mine tomorrow.
@harrykingiii134
@harrykingiii134 3 жыл бұрын
How many MM (what size) is the oil filter socket?!?🤷‍♂️
@jssdgarage
@jssdgarage 3 жыл бұрын
32mm for the oil filter housing Keep on Motoring 🤙
@edl3063
@edl3063 3 жыл бұрын
Super helpful and too the point. I just performed an oil service on my f56 using oem parts from local dealer. The filter housing drain plug is 13mm on the new dealer filter. The one on the car was t55. Since I was under the car, I went ahead with removing the under tray to perform an inspection. Under tray was secured with 8mm screw bolts, 14 of them. my f56....2018, jcw tuning kit (exhaust, tune), nw engineering 22mm solid rear bar and end links (factory endlinks are plastic, factory rear bar way too soft/hollow), michelin pilot sports (oem pirelli runflat were subpar).
@azzammeeralam
@azzammeeralam 3 жыл бұрын
Great job! Mini did bad job placing wire harness too close to oil filter
@thedude1590
@thedude1590 3 жыл бұрын
Cheers my friend. I was trying to find the size for the oil filter cap. Turns out it’s t55.
@musntang1
@musntang1 3 жыл бұрын
Great video. What size socket is use to remove oil filter housing?
@jssdgarage
@jssdgarage 3 жыл бұрын
32mm for oil filter housing Keep On Motoring 🤙
@census3370
@census3370 3 жыл бұрын
I always wanted a mini but my parents didn’t let me. 😞 ended up with a bmw but I still want that mini hopefully I can score a cheap one
@eluv201
@eluv201 3 жыл бұрын
Great vid bro. Should you always change your air filter in your mini when you do an oil change? If not what could happen?
@jssdgarage
@jssdgarage 3 жыл бұрын
If your air filter is too dirty you will obstruct the airflow to your engine, thus possible combustion issues could occur. Personality I alternate in changing the filter between oil changes, because my mini is not a daily commuter. I do always check the condition of the filter prior to the service.
@M4l1nk
@M4l1nk 3 жыл бұрын
How much oil did you put in?
@jssdgarage
@jssdgarage 3 жыл бұрын
6liters/6quarts for S model Non S 5liters/quarts
@alsn126
@alsn126 3 жыл бұрын
Is 5.5qts okay? (5 and half bottles of 5w-20)
@giannimini3293
@giannimini3293 3 жыл бұрын
thanks for this video 👍
@martinez0356
@martinez0356 3 жыл бұрын
thank you thank you thank you
@karyl372
@karyl372 3 жыл бұрын
Thanks! About to do my oil change now.
@haifajo
@haifajo 3 жыл бұрын
Thanks for this video :) I have a 2015 Mini Cooper, what brand should I get to change my engine oil? I know that I should use a high performance synthetic oil w50-40. Where do I get spare parts for my mini such as brake pads, discs, air filter, engine mounts? appreciate your help :)
@jssdgarage
@jssdgarage 3 жыл бұрын
The oil service kit i grabbed from MiniMania. You can source alot of OEM stuff there. FCPEuro is another great source. Another one is OutMotoring. Browse around find the best deal for your budget is my advice.
@alfredorodarte5783
@alfredorodarte5783 3 жыл бұрын
Ty very much that was really useful
@al7385
@al7385 3 жыл бұрын
Friendly feedback - get your facts right before you make a video. Torque wrench is for fastening only, correct oil grade is 5W40, you do not put oil on the drain plug washer, torque drain plug 22 ft-lbs, not Nm....
@Faku968
@Faku968 3 жыл бұрын
Get your facts right before correcting someone it takes 5w30 as well
@_Za_Unknown
@_Za_Unknown Жыл бұрын
30 or 40 and it depends where you live as well like if in Florida use 40 but if in North Carolina use 30
@stevenfox2172
@stevenfox2172 3 жыл бұрын
You suck. It would have been nice had you listed the tools needed in the very beginning. Not cool that you just name as you go along I mean why bother
@jssdgarage
@jssdgarage 3 жыл бұрын
Did you watch the first two minutes of the video 🤙 Keep On Motoring
@jorbjorb1
@jorbjorb1 3 жыл бұрын
What kind of washer did you get? I noticed it’s a copper one. Any leaks using that one?
@jssdgarage
@jssdgarage 3 жыл бұрын
If i recall correctly we used universal copper crush washers from the local autoparts store. No leaks were ever present.
@DanDiMaggio
@DanDiMaggio 4 жыл бұрын
Great Video! Going to be referencing this when I do mine. Changed lots of oil in the past but first time on the Mini. I was actually a bit surprised. Looks like a simple job. Guess I assumed it would be a pain since it had anything to do with BMW lol. Thanks!
@ProGamerKid2000
@ProGamerKid2000 4 жыл бұрын
So you say under the door handle is where you should Jack? I have the 4 door cooper (f55) and I've heard the same thing to Jack under the panel but i felt it and it was just plastic and I was scared to Jack it up.
@jssdgarage
@jssdgarage 4 жыл бұрын
The actual structure under the rocker panel is pretty solid, if you have a low profile jack or you setup your mini on ramps you can use a 2x4 (2ft in lenght should be good) to add a longer pressure point and minimize your doubt for damage to the plastic bits. 👌
@charlesthomas4032
@charlesthomas4032 3 жыл бұрын
I use a piece of scrap 1x4 wood about a foot long to cushion the jack and spread the load. My jackstand points have more damage on them.
@gsmini1749
@gsmini1749 4 жыл бұрын
Awesome video, thanks man. I’m changing my oil and filter tomorrow!!
@jssdgarage
@jssdgarage 4 жыл бұрын
Glad it helped 🤙 Keep On Motoring 🏁
@gsmini1749
@gsmini1749 4 жыл бұрын
@@jssdgarage it did I managed to do it myself for the first time ever!! Thanks man.
@joey.chong17
@joey.chong17 4 жыл бұрын
My windshield wiper is acting up. When I turn it off, it stops somewhat right in the middle of the the windshield. I can’t get it all the way down like it used to. What should I do?
@jssdgarage
@jssdgarage 4 жыл бұрын
Haven't come across it myself. But the Wiper position might have become uncalibrated. Or there's something elsr going on with the wiper motor. It more than likely will need removal of the linkage and manually resetting the wiper blades. I hope this helps. Keep On Motoring🤙
@husseymangtv
@husseymangtv 4 жыл бұрын
This is what the owners manual for the 2016 1.4t jetta says about the type of oil... since theres alot of comments about it.. Your engine was factory-filled with a high-quality, synthetic all-season engine oil that meets strict Volkswagen oil quality standards and has a viscosity grade of SAE 5W-40. or SAE 5W-30. You can use this oil for normal driving in all temperatures. If you need to add oil between oil changes, use only a high quality oil that expressly complies with the Volkswagen oil quality standard specified for your vehicle's engine: Engines Engine oil specification Gasoline engines VW 502 00 VW 503 00 VW 504 00 Diesel engines VW 507 00
@trevorc3063
@trevorc3063 2 жыл бұрын
Yes, it notes to not top off with more than a half-quart of non-euro-approved SAE 5w-30 in a pinch, but to use euro approved 5w-30 or 5w-40. I believe there is a note recommending Castrol but it's not that
@flores_marte
@flores_marte 4 жыл бұрын
Thanks for making this video!! I’ve never worked on my car and this video made it simple for me to follow. 🙂
@carlosnavarro921
@carlosnavarro921 4 жыл бұрын
You put the wrong oil in it takes castrol 5w40 and the drain plug does need to be changed every oil change it should come with the oe vw oil filter purchased at the dealer
@EsteBandido_YT
@EsteBandido_YT 4 жыл бұрын
the manual for a 2016 Jetta says either 5w-30 or 5w-40
@anon9025
@anon9025 4 жыл бұрын
You can use either. The dealers use 5w-40 even though the manual says 5w-30. I recommend 5w-30c3 because its good for 16,000km instead of the 5w-40 which is good to 12,000km
@danielfl.9347
@danielfl.9347 4 жыл бұрын
The oil you have used is not a bad oil, but it is not correct for this engine. You need 5W/30 with VW spec 507.000. Mostly these are the golden Castrol bottles. But your engine won't take any harm from driving with engine, but it is made for GM-cars.
@husseymangtv
@husseymangtv 4 жыл бұрын
it can take 5w 40 or 30.
@samsnow7370
@samsnow7370 4 жыл бұрын
Nice that you did the front and the back wipers... thank you. What year is your model? 2017 the same wiper? Maybe even list the size of blades. Mine is a Countryman... 2017
@jssdgarage
@jssdgarage 4 жыл бұрын
This video covered a 2015 3 Door Hardtop (F56). The Process Should Be Fairly Similar on your Countryman (F60), Front Set Of Wipers OEM part number is 61610049744 Rear OEM Wiper Is 61617411249. KEEP ON MOTORING 🏁
@samsnow7370
@samsnow7370 4 жыл бұрын
Thank you but mine look different. @@jssdgarage
@danielaliman357
@danielaliman357 4 жыл бұрын
Thanks! :)
@jssdgarage
@jssdgarage 4 жыл бұрын
You're welcome, Stay Tuned We got More Content Coming Keep On Motoring 🏁
@C-LOS310
@C-LOS310 4 жыл бұрын
Thanks for the help we are going to paint a mini cooper 2015 and we were trying to figure out how to take off the door panel and all the stuff you showed. Thank you
@jssdgarage
@jssdgarage 4 жыл бұрын
Nice, stay tuned we got more detailed videos coming soon and further coverage to disassembly ✌️
@C-LOS310
@C-LOS310 4 жыл бұрын
@@jssdgarage ok for sure