Thank you for this video! I can not get those spider gears back in on my 05 Ram 1500. I will run to the hardware store for the bolt, washer, and nut.
@goobtechgarage1142 ай бұрын
@@robvarela9602 glad it helped!
@Mr.Deko862 ай бұрын
I JUSST did the same with a box in my garage. My battery oacks say "Best if used by 2008". Infound a minimag light and i cant open the back to chamge the battery. Its still brand new.
@Redcat-lp6qy4 ай бұрын
I have a good one for sale here in texas
@poorwhiteboy65214 ай бұрын
I just did new headgaskets on my lly 2004.5 no start. Installed a lift pump use starting fluid it will start. Just not on its own.
@andrewchristiansen83115 ай бұрын
I just found that magical silver sticker in my glove box that say my XJ is a special little XJ & this video made me so happy as I also have 2 brass punches I made at work on the lathe. I thought doing differentials was like workin on the space shuttle or somethin, dude just did it with one hand like a jerk lol.
@JBidensucks6 ай бұрын
After doing thos besure to disconnect and plug your wastegate too. ❤❤😂😂😂
@AaaaandYerDhem6 ай бұрын
Hahahaha wow I remember when they had that little green tree on them for a little bit! Brought me back
@fmorelli7 ай бұрын
Why was the product used never shown or mentioned? Dye and paint are not the same thing either. Would be helpful to know what you used.
@Hulkehnor4 ай бұрын
He showed it 33 seconds into the video - SEM Color Coat
@lilkeifer068 ай бұрын
I want DOR products for my two second gen’s but they have horrible reviews. Customer service and time.
@Sammyjeans18 ай бұрын
are you really only supposed to oil between the layers with the friction modifier?
@Allen-we8gd9 ай бұрын
I literally used a regular screw driver it was a pain and hard but I did it lol
@santoshyadavyadav822710 ай бұрын
Very nice information dear ❤❤❤❤
@Keeter9410 ай бұрын
Is this possible to do inside the housing?
@dostuffchannel11 ай бұрын
Dude, best video on LSD clutches.
@The_local_idiot11 ай бұрын
“I forgor Energizer has over 20 years of shelf life”
@kyleconklin314011 ай бұрын
Good video actually shows how it comes out and goes in so many videos on here people with no clue trying to make videos
@Quentin134 Жыл бұрын
Great video thank you!
@brunocuevas8761 Жыл бұрын
Im having the same issue. I can't get the prime button hard. Lose prime after cranking it. Replaced all injectors. Do i just keep priming?
@nicholasfranks2616 Жыл бұрын
I have the same issue and did a similar setup .. but around the 2 mins mark .. you mention you had to crank for 45 mins before.. ??? geez i stopped after 4 or 5 long crank.. maybe i should try some more
@brunocuevas8761 Жыл бұрын
No I think he said/meant prime for 45 min?
@heribertobarboza4692 Жыл бұрын
Will these work for a 2015 ram 1500 rear end
@cioffiwilson2757 Жыл бұрын
I’m trying to replace my fuel filter and can’t seem to find the banjo bolt/nut that goes in the housing where the screen sits in around. Am I missing something?
@DC-pv3yh Жыл бұрын
Good video. Ive been searching for the spider gears themselves i have some where the spline has some pretty bad wear. Apparently they dont make replacements. Thanks dodge!
@russellwillett7426 Жыл бұрын
Did you say 15-16 clicks or 50-60?
@MegaElkslayer Жыл бұрын
how much horse power will you get p7100cps fuel plate versa grinding off it flat
@ogburnsgarage Жыл бұрын
Thank you for this video
@jaweikel001 Жыл бұрын
wow man this video is gold for me as a dummy i got a common rail, thinking of getting a 12v for the mech 5.9
@robertgolden1080 Жыл бұрын
Awesome video.
@scottalvarez8870 Жыл бұрын
Impressive.
@robertdawson9240 Жыл бұрын
I used a brass punch like that and found that I got more movement putting it thru like the cross pin shaft and whacking it to get them to go at same time. Then when it was hitting the carrier I went outside the closest spider gear and laid it between cogs with the end still going in the shaft hole of the far one.
@worthey1969 Жыл бұрын
I just replaced the whole assembly a few months ago got it from oriellys, I noticed right rear tire it wearing faster than the others, is it a bad assembly or something else that would cause this.
@goobtechgarage114 Жыл бұрын
It might be slipping more than it should but then again it is a limited slip. If you have big tires or if you are hard on it it will slip more. Only way to eliminate that is going to a locker or spool (not street friendly though).
@tinpin609 Жыл бұрын
It keeps “…going and going and going…” 🥁🐇🔋
@dandahermitseals5582 Жыл бұрын
I need to know if my 87 Dana 44 tracLoc is an open carrier I could just put a lunch box in. Clutches are short lived n lockers aren't? Help. Important question. Dandahermit
@goobtechgarage114 Жыл бұрын
If it is a tracloc it is not open, if it’s a locker it doesn’t have clutches. If you jack it up and spin one wheel forward and the other one spins backward it is most likely an open diff.
@dandahermitseals5582 Жыл бұрын
@@goobtechgarage114 I know that but clutches don't in the Trak loc don't respond like that. Gotta spin first. Thanks Dandahermit
@chaseholmvik5666 Жыл бұрын
Will siding the stock fuel plate forward and afc forward make me stock clutch slip and is it safe for a stock engine?
@goobtechgarage114 Жыл бұрын
Completely safe, that will only give you maybe 20-25hp. Only way your clutch will slip is if it’s weak or bad driving habits.
@Perkbilt67 Жыл бұрын
So you gonna post it any quicker then 6 months or what?
@goobtechgarage114 Жыл бұрын
Haha sorry I have been concentrating on building and racing three wheelers in the desert. Editing new videos now.
@matthewq4b Жыл бұрын
@@goobtechgarage114 Ya we are still waiting.....
@awsumnesinurfas5 ай бұрын
Same
@joeybydin439 Жыл бұрын
So I'm looking into a different diff for my 08 ram 1500. My driveway is on a slight incline, and when it snows I literally have to put it in 4wd to get up the driveway. This is basically going to keep the wheels locked for the most part when going in a straight line? It will limit the amount of power to even it out between the wheels if I understand correctly?
@goobtechgarage114 Жыл бұрын
This is a repair on a limited slip rear differential. If your differential is a “open“ type this won’t do you any good. More often than not Dodge truck differentials are limited slip and this is easy to check by jacking up the rear axle so both tires are off of the ground and put the truck in neutral, then spin one tire and see if the opposite tire is spinning the same direction or the opposite direction. If it spins the opposite direction this is an open differential. If you still have any question about it you can call your dealership and give them your Vin number to see what your truck has. If yours is an open differential the easiest way to upgrade it is to find a vehicle salvage yard/wrecking yard and buy a whole axle assembly.
@joeybydin439 Жыл бұрын
@@goobtechgarage114 I definitely don't have a limited slip, I'm asking if I upgraded to a trac lok differential, will that lock my axles?
@myfault05 Жыл бұрын
Hello, I know an old vid but would this kit fit for a ford 10.25? LS is not working and most kits don't come with the Belleville spring. Thanks for the awesome video. Been looking awhile for this.
@goobtechgarage114 Жыл бұрын
Hello, I doubt this kit will work for you but you should be able to buy a similar kit for yours from a differential and driveline shop or online.
@chaseholmvik56662 жыл бұрын
Is just sliding the fuel plate forward safe for a stock truck
@brycechow91782 жыл бұрын
Yes I’ve done it to my 96 12v and it’s got 235,000 miles on it, runs good and I just averaged 18.5 mpg on my last tank
@chaseholmvik56662 жыл бұрын
@@brycechow9178 ok thanks I think I might do that I wanted to get a 0 fuel plate but my trucks got 283k on it and idk if it’s a stock clutch so I don’t wanna wear it out if it’s too much for it
@goobtechgarage114 Жыл бұрын
The truck in the video had 389,xxx on it, over 550,xxx now.
@landseaandairtransport14712 жыл бұрын
will doing this effect fuel economy much?
@goobtechgarage114 Жыл бұрын
Not at all
@DarkSim772 жыл бұрын
Is there a stronger version of those clips now?
@goobtechgarage114 Жыл бұрын
Not that I believe
@tylerpimphvac2 жыл бұрын
Awesome video very informative
@eddietorres33152 жыл бұрын
What if you just adjust the star wheel and not do the plate mod?
@goobtechgarage114 Жыл бұрын
The star wheel takes pressure off of the spring introducing more fuel at low boost, the fuel plate allows rack travel giving fuel over the entire power band.
@TheRamRunner02052 жыл бұрын
since I have this style rear end and like to do burnouts what would be a better alternative for a carrier that doesn't burn out as easy
@goobtechgarage114 Жыл бұрын
A Detroit locker or something similar would be better for you.
@Mechanickirk2 жыл бұрын
Can't you just bring the cylinder to TDC?
@anubis86802 жыл бұрын
Nuts and Bolts!!! Brilliant, so yea.... I wouldn't have used the old cross pin to bash on the edge of the teeth.... nope not me. Thanks for the pro tip! Doing a full replacement of gears.
@Mohamedseddek2 жыл бұрын
👍♥️♥️♥️
@madman4320002 жыл бұрын
A shop refused to do my diff because they didn't have the special clamps to compress the clutch packs, hmmm...mine is the 8.25
@JamesBlack.1772 жыл бұрын
Nice
@brucerazor52022 жыл бұрын
My 99 dodge has an open Dana 80 and I’m going to put a limited slip back in