Thank you very much! It helped to me :-) I could not setup more than 4 cubes.
@hikmetcancelik14 күн бұрын
Does it have to be mounted or attached to the wall?
@dalanik14 күн бұрын
Yes, you can either screw it but I glued it as you can see in the video and it works quite well (to the window, not wall)
@kamenakov24 күн бұрын
Už to asi nefunguje mám činu a nfc není nikde
@dalanik21 күн бұрын
Ja tam furt vidim ty nfc automatizace co jsem vytvořil. Ověřím ještě zda fungují, přiznám se že je moc nepoužívám kromě na zapnutí alarmů ale to je málokdy...
@kamenakov21 күн бұрын
@@dalanik to budu rad
@dalanik13 күн бұрын
@@kamenakov Sorry za prodlevu, ted jsem zkousel a funguje to
@kamenakov13 күн бұрын
@@dalanik divný mě ne a to mám čínský servr
@casavirtual-automacao26 күн бұрын
I can deliver a Xiaomi household appliance (Mi Home) with the same instructions you gave.
@dalanik25 күн бұрын
Yes but there are not many controls for the devices....
@kenlynx90Ай бұрын
Anyone has a link for this app please?
@dalanikАй бұрын
The link is in the description and it works, I just checked....
@BarriFerАй бұрын
Thank you for the information, Do you know how to downgrade the firmware of C200 Xiaomi Mi home Camera, to avoid some restrictions?, thank you in advance and best regards
@leezaabdulrashid7833Ай бұрын
Where is the apk, i cant find it
@user-wn7qk6dh5tАй бұрын
감사합니다~~해결되었습니다!!!
@SuperMery51Ай бұрын
Thanks ,very good
@ranahasnat9192Ай бұрын
"Sir, I wanted to ask if the Xiaomi Door and Window Sensor 2 can be connected with the Bluetooth gateway of the Mi 360 2K Pro Camera because I have both products, but the Xiaomi Door and Window Sensor 2 is not connecting with the Bluetooth gateway of the Mi 360 2K Pro Camera. Kindly guide me on this matter."
@ranahasnat9192Ай бұрын
"Sir, I wanted to ask if the Xiaomi Door and Window Sensor 2 can be connected with the Bluetooth gateway of the Mi 360 2K Pro Camera because I have both products, but the Xiaomi Door and Window Sensor 2 is not connecting with the Bluetooth gateway of the Mi 360 2K Pro Camera. Kindly guide me on this matter."
@dalanikАй бұрын
It should be able to, are both devices for the same region? Unfortunately I can't help much since I don't own Mi Camera, I use different gateways....
@nurbdailym2 ай бұрын
Russian app, for security on your home 😃
@dalanik2 ай бұрын
As opposed to american apps, which are trustworthy....
@nurbdailym2 ай бұрын
@@dalanik big russian or Us brothers are watching you
@dalanik2 ай бұрын
Or chinese 🤣
@BROZILLATVАй бұрын
@@dalanik can you provide a New link please?
@stepanzel2 ай бұрын
Amazing, thank you!
@YadhulMohan2 ай бұрын
can you tell me the reading distance of this reader....mostly the 13.56MHz can reach 1 meter ...is it like that
@dalanik2 ай бұрын
No, you have to put the card on the reader. Maybee max 2-3mm
@mikaelastefkova2 ай бұрын
Love your phone's screen! I also love to customise it as much as possible 💗
@jankobanankojan2 ай бұрын
How to disable or turn it off when you are at home.. is it possible!?
@dalanik2 ай бұрын
Just make automation that will be active for a certain period of time?
@jankobanankojan2 ай бұрын
Can you please send me tutorial....
@jankobanankojan2 ай бұрын
Maybe on mail...but i can't send on comment my mail
@jankobanankojan2 ай бұрын
It's not possible to disable or switch off smoke sensor... because he can work without connected to mi home app...it can work on his own....and it's stupid to not have function to switching off !!!!!
@dalanik2 ай бұрын
Yes they could have made that... but then, neither classical smoke detectors can be switched off...
@Paul-22 ай бұрын
Your videos are great
@dalanik2 ай бұрын
Thanks!
@sriram278513 ай бұрын
Hi I have configured devices to mainland china but one device is from Singapore region so how it bring it under mainland china so that I can view all the cameras
@sriram278513 ай бұрын
@dalanik
@sriram278512 ай бұрын
Can you please help me
@dalanik2 ай бұрын
Sorry, I don't use unlocked app, I only installed it to test it while making the video....
@sriram278513 ай бұрын
how do i change the location to main land china in MI tv ( India )
@sriram278513 ай бұрын
For IPhone do you have app ?
@dalanik3 ай бұрын
No i dont believe there is iphone versions.
@sriram278513 ай бұрын
Ok I managed to get android phone and do it but how to get this on mi to its region specific in India
@sriram278513 ай бұрын
I bought from china external camera so how to set region to India but not syncing any suggestions
@sriram278513 ай бұрын
@@dalanikhi I got outdoor camera and location it’s works as mainland china only not India so how to go about it which server better
@shanleeattappattu3 ай бұрын
@@sriram27851set the sever China Mainland
@ofecer0073 ай бұрын
not work
@dalanik3 ай бұрын
Hmm, strange, i paired the account a long time ago but it still works great. Maybee the server is the issue? What server are you on?
@ofecer0073 ай бұрын
@@dalanik russia =) mihome/yeelight app work.
@arkadiuszrenc78883 ай бұрын
You are great man!
@dalanik3 ай бұрын
Thanks 🤣
@Cessurre3 ай бұрын
Which version of mijia app (language) do you use?
@dalanik3 ай бұрын
I use china server, the app is in english
@freeusersquared4 ай бұрын
PS - you're a life saver !! thank you
@freeusersquared4 ай бұрын
@Dalibor Lanik - how do you manually add the plugins that you can download from the Russian website?
@alexanderwilliams17314 ай бұрын
I got the ew300 the 76 key version for my 26 birthday 🥳!!!!
@muhabmahmoud41044 ай бұрын
Got mine working great but the issue is the bead connector can’t pass through the motor. Is there a way to get around this?
@dalanik4 ай бұрын
I didn't find one. It opens up to 3/4... If anyone has found the solution I'd also be interested....
@muhabmahmoud41043 ай бұрын
@@dalanikFound the solution. You have to buy a specialized tool called ballchain pliers to remove the connector and then connect the beads again without it to make an endless loop.
@dalanik3 ай бұрын
@@muhabmahmoud4104I can remove the connector without any problem, but how it is connected without the connector???
@totalfootball10104 ай бұрын
Can this connect to the xiaomi app?
@dalanik4 ай бұрын
No, this works with google home
@emanueldanielrada70614 ай бұрын
hi Dalibor. do you still have some good active links with instructions and download:)? I have an 735moov and I'd like to give it a try..
@dalanik4 ай бұрын
file.io/RYi22dEKboi9
@hironotificationАй бұрын
@@dalanik Pozdrav Dalibore, ako nije problem može li link za download. ;)
@maximusrevolt99845 ай бұрын
Hi Dalibor! Do you still have the instruction and download links? I found my old Mio moov s555 and want to try to unlock it as you did in your video!
@dalanik5 ай бұрын
file.io/iLduP6FzuuUn , file.io/iLduP6FzuuUn , password should be visual
@Jdmkasha3 ай бұрын
@@dalanik I have old navman n400 will that work too? also the links are dead can you reupload?
@rodrigomarins2735 ай бұрын
It s work with amazon alexa?
@BarbD555 ай бұрын
EGWT-S911_ReV.B model. mine doesn't have a dongle... Can't find any videos to set this up
@mr64455 ай бұрын
is the accessories included like wireless dongle
@dalanik5 ай бұрын
It needs to be connected via cable, there is only PEN as accessory
@Ay_caramba775 ай бұрын
I bought 20 warm white and spend 4 hrs trying to sync them, and then i foud your video 😢
@dalanik5 ай бұрын
You need to replace them with spectrum ones
@Ay_caramba775 ай бұрын
@dalanik you will be laughing 😃 that's what I did and it still doesn't work. White Spectrum 345LM. China server, tried at least 20 times with aqara hub M1S. Possibly there is a new version of lamps that dosnt sync?
@dalanik5 ай бұрын
@@Ay_caramba77 Could be, but t can also be because of the Aqara hub... hard to tell. One thing with Xiaomi hub, it is impossible to update the bulb firmware, so if newer bulbs have newer firmware from IKEA, that cou;d break the compatibility....
@sharpie5105 ай бұрын
Can these battery operated ones be left plugged in the charger and still be operational or do they stop working when on charge?
@dalanik5 ай бұрын
Sorry i didnt try since i dont have ac outlet nearby. But i think it wouldnt be good for the battery, being constantly plugged in. Battery lasts long time ariund 2-3 months.
@davidstimec26935 ай бұрын
Hey. I just found your video. Thank you for all the info provided. I managed to connect all of my devices except the robot vacuum cleaner. For some reason after MI MOP PRO is connected it goes thru my room cleaning and all but the MAP won't come up. I tried reseting and reinstall factory reset the vacuum cleaner. None of it helps. Did you come across to a similar problem and maybe found a solution?
@egebazl21695 ай бұрын
Nice review
@Andy-tq3ks5 ай бұрын
Can it be on 24/7 or do I need to turn it off from time to time?
@dalanik5 ай бұрын
You turn it off only for cleaning, normally it is always on in order to remain connected to wifi
@Andy-tq3ks5 ай бұрын
@@dalanik Ok, thank you for your help, Dalibor! Your video was very helpful! :) Greetings from Croatia!
@rizkyp6 ай бұрын
This button works with home assistant zha, funny thing is it reports back up to 5 clicks. Single, double, triple, quadruple, furious 😂. If you click 5 times or more it sends message "furious". Oh it also support hold and release function. Useful for temporary mode.
@camilobustoshoger6 ай бұрын
Funciona muy bien, sensibilidad, precisión etc. Lo unico que no funciona muy bien es que tiene que estar en una superficie muy plana, si la superficie tiene un pequeño levantamiento no funciona adecuadamente. En cambio cuando ocupo un logitec con sistema infrarojo funciona con cualquier superfie (hasta en la pared).
@maksymprotsak33166 ай бұрын
Hi! Thank you for video. I always receive errors from my devices. I done calibration, anyway the probled did not solve. If you have idea, please test me. Thank yuo!
@dalanik6 ай бұрын
I sometimes get random errors of valve failure, but not often. It works like 99% of the time....
@maksymprotsak33166 ай бұрын
I get 3-4 times a day... Realy do not know what wrong@@dalanik
@dalanik6 ай бұрын
Is the signal good between hub and valves? Does it happen on one valve or several?
@maksymprotsak33166 ай бұрын
@@dalanik It is happen on two devises, the signal is normal. Couple times I install them again with calibration.
@dalanik6 ай бұрын
I would try switching valve location i.e. swap one that works ok with one that doesn't so you can tell if it is signal or device issue....
@wh9836 ай бұрын
ty
@trekkie_martian6 ай бұрын
One of my Honeywell, just beeps every few hours on its own on an interval of around a minute, brand new battery, any idea what it can be?
@dalanik6 ай бұрын
But is it online?
@trekkie_martian6 ай бұрын
@@dalanik its not connected to the app, its on its own, the other 3 are okay, just this one beeps like I mentioned. thanks
@pixel30406 ай бұрын
if you have the intuos model:CTH-490 do you think its still good for beginners even if its an older model?
@dalanik6 ай бұрын
I really can not tell, i suppose it is good if you get it for a good price. My daughter still uses it.
@gurdeepsunny30066 ай бұрын
Many Thanks Man, Finally my Mijia MOp2 vaccum robot workes.. only problem is Map can not be saved .. Can you tell me how to save map also.
@MarkusPeikert6 ай бұрын
can you show battery change? its difficult
@dalanik6 ай бұрын
I made video on that: kzbin.info/www/bejne/fnSXYoqpfrWto7Msi=SdqmDIo0lD3sVLrq
@reymartortega96626 ай бұрын
Hello, sorry for being noob but what's the difference between dual and triple mode?
@dalanik6 ай бұрын
I have no idea what triple mode is. Dual means it can be connected by usb c cable and by bluetooth (wirelessly).
@reymartortega96626 ай бұрын
@@dalanikthank you for the fast response.
@XeroXRBLXАй бұрын
sry for late response, but the 3rd mode is wireless using usb dongle