Ай бұрын
3 ай бұрын
6 ай бұрын
7 ай бұрын
7 ай бұрын
Жыл бұрын
Пікірлер
@Luca22282 20 сағат бұрын
Ciao amico grazie per il commento sul gruppo 890ktm Italia bello scarico
@PissTakeProduction 16 сағат бұрын
Your welcome Luca 😁
@PissTakeProduction 3 күн бұрын
This ride inspired the development of Squid Boy www.redbubble.com/i/holographic-sticker/Squid-Boy-by-pazrahn/168140057.A3LW6
@benmiddleton8266 5 күн бұрын
I have an SMT in Sydney as well - not many of us ... I was thinking of just an arrow mid pipe (have wings exhaust) - did you need to tune at all or just runs well without? Also any reason for power plate outside of keeping filters clean? That full system looks and sound great ...
@PissTakeProduction 5 күн бұрын
The bike didn't need the tune. It's runs great and I'm really happy with the bike. Arrow make great exhausts if I didnt buy the Vandemon the Arrow was my second option. The airbox mod I believe helped with the exhaust to run way better. Awesome another SMT rider I'll be on the lookout with ya on the road.
@SomewhereInside 8 күн бұрын
What is a squid ? Hate to tell you , but most drivers are listening to crap music at insane volumes , probably watching KZbin at the same time on a laptop hanging off their steering wheel …they don’t hear a bike 😢
@PissTakeProduction 8 күн бұрын
It’s just a term for a riders that wear shorts and t-shirt and no protective gear except a helmet. As for cars I ride to always be in front and away from blind spots from them.
@PissTakeProduction 8 күн бұрын
This ride inspired me to create a Squid Boy Character that’s essentially what it’s about.
@thelonewolf666 8 күн бұрын
watch those speed cameras pissy
@PissTakeProduction 8 күн бұрын
Yer that and how bad are the mobile camera cars. So many now it's a joke.
@MQ-lt7fd 9 күн бұрын
Awesome ! Great work ! Thanks for sharing !
@PissTakeProduction 9 күн бұрын
I did add Loctite to the two retaining pins and tighten down with 2mm Allen Key.
@MQ-lt7fd 10 күн бұрын
Thank You
@PissTakeProduction 9 күн бұрын
No worries 👍
@PissTakeProduction 10 күн бұрын
This KTM 890 SMT is almost dialed in to be the perfect bike. Next Episode Installation of MSCMoto Apex Bar Mounts to reduce the handlebar vibration.
@kenholmes3063 10 күн бұрын
Looks like it's pulling fairly smoothly mate.
@PissTakeProduction 10 күн бұрын
Yer she's dialed in thats for sure.
@kenholmes3063 10 күн бұрын
So do you think it performs better?
@PissTakeProduction 10 күн бұрын
I think the fuel air ratio is better and before you could smell the bike was running a little richer.
@magnusv5269 15 күн бұрын
Thanks for the review mate. I have bought the Arai xd-4 after your review. I have also gone through 3 helmets this Sept 2024 till Jan 2025. Nolan N70-2, Oneal Sierra 2 Both the wind noise is really torture with out the ear riding plugs. and last the Bell DX9 also a good lid but riding in summer high temp really hot inside. I purchased the Arai XD-4 for summer riding, the vents are excellent when the temperature in Sydney reached the 30's this Jan. The Bell DX9 I'll Keep for Winter riding.
@PissTakeProduction 15 күн бұрын
Awesome. Yer it's a good helmet. I did find at High speeds vibration gives an itchy nose but if you have a good screen on the bike less likely to happen. I haven't looked but has XD5 replaced all XD4 Helmets yet?
@freddycastillo773 21 күн бұрын
Where can I find that top box and rack ?
@PissTakeProduction 20 күн бұрын
Hey Freddy so the side racks are off eBay and the top plate is B&B Engineering. The top Box was from Bunnings hardware.
@WESTERz 28 күн бұрын
Indian?🤢
@PissTakeProduction 27 күн бұрын
Butter chicken 🍗
@thelonewolf666 29 күн бұрын
what gearing are you running mate? seems ok at 100
@PissTakeProduction 29 күн бұрын
Run stock always been good once the Yoshi exhaust was put on.
@thelonewolf666 23 күн бұрын
@@PissTakeProduction so 14 47?
@thelonewolf666 Ай бұрын
DRZED ZED ZED
@PissTakeProduction Ай бұрын
My father was Italian and he could speaka no Engrish so I have to blame the papa
@cheny6489 Ай бұрын
does the starter gear spin freely on the NiceCNC Oil Starter Cover spacer?? i think it is not spinning freely like the original oem ones...
@PissTakeProduction Ай бұрын
Mines does. From what I know the first gen cover was not a good fit. Message NiceCNC and ask them. I did see a guy on YT have an issue and they fixed it. But mines good ok.
@lenyadish Ай бұрын
See each gards inside and you will make a right decision) sure barks) crf must be get down)
@73karmuh Ай бұрын
does it clear the radiator fan?
@PissTakeProduction Ай бұрын
There's no radiator fan on the bike.
@cheny6489 Ай бұрын
Dude, hows the starter and oil filter covers holding up? Heard about them cracking over time!
@PissTakeProduction Ай бұрын
Both good. Bikes done a few thousand KMs. NiceCNC are good products.
@cheny6489 Ай бұрын
@@PissTakeProduction great to know.. shall go ahead and get 'em
@joepillari7142 Ай бұрын
this mr. mustachio approves
@PissTakeProduction Ай бұрын
Ment to send you the tyre link.
@metropolitano21 Ай бұрын
And that Cat? Is a handmade Cat or a decat?
@PissTakeProduction Ай бұрын
It's a resonator
@PissTakeProduction Ай бұрын
firstledger.net/token/rGGvzMijvykpEcTPizcMYDoSVsqvb2rBPT/4D4D544243000000000000000000000000000000#
@PissTakeProduction Ай бұрын
firstledger.net/token/rGGvzMijvykpEcTPizcMYDoSVsqvb2rBPT/4D4D544243000000000000000000000000000000#
@potter_corey Ай бұрын
Sounds spicy. Love it.
@PissTakeProduction Ай бұрын
🔥
@nsotelo Ай бұрын
Thanks, nobody else has done a video on this. I’m going to give it a try on my bike
@PissTakeProduction Ай бұрын
Let me know how it goes.
@SamRyder-l1e Ай бұрын
Doing this now. I dknt like rhe way exhaust springs install on inner part of flange. Seems to interfere with head. Can you confirm spring orientation? Outer flange top hole, inner flange bottom hole for spring. Putting in top hole inside way too tight
@PissTakeProduction Ай бұрын
Hey Sam. I put the left pipe header with spring clip on top hole then on the right lower. On the right header pipe I had to put the spring on the upper hole and left on the upper too. What happened with me the spring on the right pipe left snagged so I moved it to the upper hole. Yes I would probably prefer the spring all even but thats what worked for me.
@Denspi1969 Ай бұрын
D R ZED great bike
@PissTakeProduction Ай бұрын
Thanks mate. You should see how I say Akrapovic 😂
@Nigriff Ай бұрын
Sounds great. Did u lose any mid-range torque?
@PissTakeProduction Ай бұрын
It gained much more. The emissions restriction on the stock exhaust truly limit the engine. Before heat radiated off the exhaust sides & now reduced with the titanium. Definitely the way to go. Now doesn't force the engine with the captured emissions. I highly recommend this change.
@joepillari7142 Ай бұрын
@stevesane800 Ай бұрын
Looks the business!
@PissTakeProduction Ай бұрын
Thanks Steve
@benwoodruff4466 Ай бұрын
Looks epic, well done. 👏👏👏 Sounds sooooo much better 🎶🦻
@PissTakeProduction Ай бұрын
Thanks bud, sounds like a banshee.
@stevesane800 Ай бұрын
Fantastic sound PT! Strangest things changing exhaust systems, the completely transform great motorcycles to another level. Either breathes better & a ton lighter. Definitely worth installing them yourself to offset the cost of the system. Patience, time & good tools. It still has a cat yeah?
@PissTakeProduction Ай бұрын
The cats gone. vandemon call it a resonator. It does have a baffle system but sound is perfect. Yer 2 days it took me. KTM is crazy what you have to take off to install the headers. Yer easily would add over $1k for install labour.
@PissTakeProduction Ай бұрын
What's funny behind the scenes opening up this bike the sound you have to hear it.
@tomthomsen11 Ай бұрын
Anyway you could post a list of what you've done? Mine is black but i like the yellow and your graphics!
@PissTakeProduction Ай бұрын
Hey Tom in the community section you'll find all the parts and prices.
@tomthomsen11 Ай бұрын
@@PissTakeProductionI'm an old fart! I don't even know what the community section is or where to find it, lol! I sure love the look of your DRZ!
@stevesane800 Ай бұрын
So glad you didn't rev it during the first start up. They say to give the ECU 10mins to readjust. Ive read this before on another exhaust system brand. I wonder if you can fit a larger diameter washer to cover the slot mismatch? I understand tolerances, but a mismatch looks like a mistake.
@PissTakeProduction Ай бұрын
Yer 10mm out with the exhaust connected to the resonator. I'm talking with Vandemon on a fix. Yer the good news I don't have to tune it. It's definitely makes the bike the stock exhaust traps all the heat in and the Vandemon system really improves the bike.
@stevesane800 Ай бұрын
Fiddly job, but well done! Do the down tubes separate from the header pipes? The best part about these is the use of springs as long as you have a decent spring puller. I have one since ive had my KTM vack in 2005
@PissTakeProduction Ай бұрын
Yer they separate left slots into the right.
@PissTakeProduction Ай бұрын
What brand did you put on yr KTM?
@stevesane800 Ай бұрын
@@PissTakeProduction the KTM was stock. But it had springs back then so the spring puller came in the tool kit. When KTM were generous 😉
@PissTakeProduction Ай бұрын
@@stevesane800 cool didn't know that. On the SMT it has a steering dampner and came with trickle charger which surprised me.
@benwoodruff4466 Ай бұрын
Sounds perfect 👌
@kenholmes3063 Ай бұрын
Sounds great mate
@PissTakeProduction Ай бұрын
Thanks Ken
@PissTakeProduction Ай бұрын
The radiator guard will be added during Episode 4 with the installation of the Vandemon Performance Exhaust.
@benwoodruff4466 Ай бұрын
Looking forward to part 2 & sound clip. 👏
@PissTakeProduction Ай бұрын
Yer another day to finish off
@benwoodruff4466 Ай бұрын
Looking great 👏
@PissTakeProduction Ай бұрын
Thanks bud.
@scrollnslide Ай бұрын
What was the tank cap
@PissTakeProduction Ай бұрын
Sorry just saw this response. Do you mean the acerbis fuel cap? That is standard and comes with the tank?
@PissTakeProduction 2 ай бұрын
Who would buy a motorcycle with a chance of the company going bankrupt? 😂
@Zyreael_ 2 ай бұрын
I would, just waiting for the new 390 ADV
@PissTakeProduction Ай бұрын
@@Zyreael_ Yer good choice. I'd say the new 390 is better choice than the cfmoto 450mt
@Nigriff Ай бұрын
@@PissTakeProductionany company can go bankrupt.. it's a great bike
@Nigriff Ай бұрын
@@PissTakeProductionI just got an 890 smt for $10,499 USD. 2 year warranty extended to 4 years if I use the dealer for service. I test-rode the bike month ago and tried other bikes, but kept coming back to The SMT.
@Nigriff Ай бұрын
@@PissTakeProductionI tried a Tiger 900 GT, but it felt boring. I tried a Ducati Desert X, and it felt sloppy. I sat on and researched many other bikes, but nothing else could satisfy what I'm looking for... a fun bike for twisty roads and some cruising for my 6'2" frame with a comfortable riding position and seat. (I did get the heated grips for winter)
@benwoodruff4466 2 ай бұрын
Great review. 👏
@PissTakeProduction 2 ай бұрын
Does that mean you'll get one 😂
@Nigriff Ай бұрын
@@PissTakeProductionI looked at so many other bikes, but they all felt or looked boring/uncomfortable.
@PissTakeProduction Ай бұрын
@@Nigriff Yer I hear you. Hard to find that unicorn 🦄. The KTM has its pros and cons.
@vspatmx7458 2 ай бұрын
Very happy with barkbuster since ages.. Have no reason to try anything else.. Its like ppl who wanna buy garmin watch Won't bother with apple watch.
@PissTakeProduction 2 ай бұрын
100% bark busters are great. Casio and G-Shock watches too.