BertsFordFactory

Пікірлер

@bfdjd0681 22 күн бұрын

Loved Waha, and so glad you are getting this running again!

@shaifulification 26 күн бұрын

Hello mate...where do u get this engine mount? Can u share a link tq

@BertsFordFactory 25 күн бұрын

www.ebay.com/itm/393589976953

@tjwilly Ай бұрын

Looks great. I would just suggest using the pressure release lever/button on your caulk gun to stop that excess caulk coming out

@morrighankrow5113 Ай бұрын

So were you able to fix your 38in deck? I’m finding it near impossible to find parts let alone a KZbin video on that specific deck showing proper repair or rebuild

@BertsFordFactory 25 күн бұрын

Yes! The bearings were the same as the larger deck but the belt and blades were different. I think I ordered them from eBay

@morrighankrow5113 24 күн бұрын

@@BertsFordFactory thank you for the reply.. I was a bit frustrated, then after I messaged this, I actually found two full videos on a 38 and not a 42.. So, I was able to final piece it together after a few days of research. The mower was given to me for free with a box four new blades, so it was a crash course on the deck rebuild since it was disassembled when I got it and part of the deck was destroyed from previous owner hitting “stumps??” forcing the deck into the blades, but I got it back together, pounded out the misshapen deck and it cut for about 5min.. then Nikki Carb decided to join the party of F@ckery with a damaged float valve and flooded the entire engine.. Spark plug, oil tank and air filter were all compromised lol I learned a lot about this mower in less than a week.. cleaned and rebuilt the Nikki, completely drained and replaced oil and drained/dried/replaced spark. It’s mowing, but it has a real rough idle.. hoping it’s just needing a valve adjustment and this isn’t just a constant now, due to damage from possible hydrolock 🙄 I’m not ready to pull the actual engine apart just yet. But it was free, and I’ve only spent maybe 50 total on carb rebuild, spark and fluids so either way I’m calling it a win 🥇

@roddanger80 Ай бұрын

Great to see it moving again and looking perty!!

@BertsFordFactory 25 күн бұрын

Thanks again!

@randyk2904 Ай бұрын

How’s the system been working? Any replacement?

@bryongliege8090 Ай бұрын

Had this been someone else's Mustang, it'd been done in under an hour. Pinky up spongeBurt!

@Electrotat Ай бұрын

I have an Audi S5 2008, on that they throw a code but you wouldn't know without plugging it into vagcom, when they go they shut the high pressure fuel pumps down resulting in loss of power. P1577 was mine, right engine mount solenoid valve open circuit.

@jefflilyea4669 Ай бұрын

I really like that the car doesn't have a name. But don't put stuff on the paint.

@bryongliege8090 Ай бұрын

A skagenstang!

@MrProvinspoul Ай бұрын

I love this Inverter i have 3 myself woth leaf battery, the only thing that is bad is no power from the grid no power the Inverter, it would bee nice to have power when the grid is down. By the way very nice setup you have with the 4 inverter..

@bradleyking7006 2 ай бұрын

Nice work! I do a lot of bathtub and tile refinishing , My experience over the years of seeing glass doors in bathrooms is a pain to maintain and if it's not properly ventilated, you're going to run into a whole slew of issues that you won't get with a curtain. This is something I would consider.

@heraldarnold437 2 ай бұрын

What kind of issues?

@samwell_6977 2 ай бұрын

Why are there two 5.0 badges on the same fender like a foot away from each other?

@Picproject 2 ай бұрын

Dude! Looks good👍🏻

@norsangkelsang7939 2 ай бұрын

can you post brand and model of the tiles wall and bathroom floor? thanks

@BertsFordFactory 2 ай бұрын

DELLA TORRE BELMONT GLAZED PORCELAIN TILE

@therockandthesock 2 ай бұрын

Why upbadge?

@CNSTAdventures 2 ай бұрын

Why is there 2 5.0 badges right next to each other

@JacobChavez-bl7tx 2 ай бұрын

Just in case you didn't see the first one man

@kathrynbratvold3960 2 ай бұрын

Its beautiful!

@MegaMrmeathead 2 ай бұрын

It’s a great shower, I know from experience

@billbillinger2491 2 ай бұрын

She moves! 👍

@roddanger80 2 ай бұрын

Warms my heart to see my uncle's old beloved truck moving again!!

@samfish6938 2 ай бұрын

i would wire panels in series to bring amps down and add more panels

@BertsFordFactory 2 ай бұрын

I ran out of usable roof! I could have added another line or two but at a fairly steep angle :(

@andrewkoestl 2 ай бұрын

The military would buy those for a pretty penny 😏

@chrissanfilippo7877 2 ай бұрын

Where did you send the seat, and did they rebuild the springs as well, I would appreciate there number

@BertsFordFactory 2 ай бұрын

I have a very talented family:) my nephew in Louisiana does custom hot rod and boat interior and helps me out now and then:)

@chrissanfilippo7877 2 ай бұрын

Well I also have a 66 Rancho seat, I was wondering how much it would cost to rebuild the springs and upholster, couldn't find any one around me to tackle it or I'll put it up for sale

@jack3231 2 ай бұрын

🙏

@thomasmanyjr6987 2 ай бұрын

Mississippi?

@BertsFordFactory 2 ай бұрын

Louisiana

@thomasmanyjr6987 2 ай бұрын

@@BertsFordFactory y'all got a cruising the coast over there ?

@bryongliege8090 2 ай бұрын

You didn't bust a single nut!? Sounds believable to me.

@BertsFordFactory 2 ай бұрын

Smart ass:)

@Dementiatrump 2 ай бұрын

🔥🔥

@BertsFordFactory 2 ай бұрын

Thanks!

@user-tt4qo7gy1j 2 ай бұрын

Nice project

@Ibrandon3727 2 ай бұрын

That’s awesome!

@BertsFordFactory 2 ай бұрын

Thanks!

@ryanbaker8060 3 ай бұрын

Needed racing stripes

@DeismThroughRevelations 3 ай бұрын

Give it twenty minutes tops.

@BertsFordFactory 3 ай бұрын

Probly! Proof of concept though. Run it break it build it better!

@jimmyjuju 3 ай бұрын

Keep the truck, ditch the nag.

@BertsFordFactory 3 ай бұрын

Can’t ditch the sugar momma😜

@VikingKing-gm2mh 3 ай бұрын

🤡

@hunterhancock5221 3 ай бұрын

That smile at the end made it

@BertsFordFactory 3 ай бұрын

I am excited to get started on this again!

@hunterhancock5221 3 ай бұрын

@@BertsFordFactoryI could tell lol

@bryongliege8090 3 ай бұрын

Master Bert of all trades! Time for shittin and gettin!

@BertsFordFactory 3 ай бұрын

You know it!

@mikepsych283 3 ай бұрын

Oh I don't think you're quite done yet. Can you stop by my house and help me complete my honey-do list and then I can help you with the truck? Although I don't know anything about fixing car so I really just want you to come over and do work at my house

@BertsFordFactory 3 ай бұрын

You’re killing me🤣

@ericmartinez6692 3 ай бұрын

What's the black plastic cover called? I knownit goes by a specific name. Thanks in advance

@BertsFordFactory 3 ай бұрын

Sorry I’m not sure

@bryongliege8090 3 ай бұрын

Twin turbskis! Hell yeah brother!!!

@BertsFordFactory 3 ай бұрын

You know it!

@darbeolder7790 3 ай бұрын

Thank you for keeping it sbf❤

@BertsFordFactory 3 ай бұрын

#purity

@guidorea8347 3 ай бұрын

Twin Revlons??????..... 😁🙄🤨

@BertsFordFactory 3 ай бұрын

Aka spooly boys

@user-yl9iw4jp9n 3 ай бұрын

I would like to drive this

@BertsFordFactory 3 ай бұрын

It was fun and the guy who bought it drove it home about 70 miles!

@melvinpuller9391 3 ай бұрын

Tubbin ?

@BertsFordFactory 3 ай бұрын

It’s got ladder bar and coil over suspension that does allow a fairly wide tire in the rear but no tubs ( yet )😁

@roddanger80 3 ай бұрын

Thanks for sharing this videos! It's awesome seeing my uncles beloved truck come back to life!!

@BertsFordFactory 3 ай бұрын

Just waiting on a trans part we should have it driving soon! Thanks for watching!

@peteobert 3 ай бұрын

Take good care of her. It was my uncle’s for many years.

@BertsFordFactory 3 ай бұрын

We are it’s a great car!

@marianimal 3 ай бұрын

It sounds so good :)

@kathrynbratvold3960 3 ай бұрын

Im sure enjoying your work on this car- you seem to never get put out by unexpected problems- but then mayhaps you do expect them and so are not surprised. Good job!

@BertsFordFactory 3 ай бұрын

Thanks for watching!

@jabaricobain 3 ай бұрын

How do you fix that? My 66 ranchero has a rusted frame !

@BertsFordFactory 3 ай бұрын

We are gonna be covering that very soon, basically lots of welding and some 4”x 6” tubing:)

@jonnysanchez3833 3 ай бұрын

Did you get sponsored by Harbor Freight? 😂

@BertsFordFactory 3 ай бұрын

I wish @harborfreight :)

@garychipman3095 4 ай бұрын

Watching this video is giving me a headache and dizzy with this fast forward. Good video though.

@BertsFordFactory 3 ай бұрын

Ya we won’t be doing that again:)

Ең жақсы KZbin

Пікірлер