3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
Пікірлер
@charlesleake930 5 күн бұрын
Good vid !
@xoxo9623 10 ай бұрын
if you change the turbo, then you must repeat the job
@dexterjsullen Жыл бұрын
man you made that look way too easy, and do they hold up a long time
@forgottenknowledge8917 Жыл бұрын
Music is pointlessly loud
@Deann-187 Жыл бұрын
Yeah mate there's some people and businesses that I wouldn't send a enemy too, Good stuff on teaching yourself .
@zachzakhour4415 2 жыл бұрын
hey mate, looking at getting one welded up any chance u can do it if so how can i get in contact
@buildnboost4561 2 жыл бұрын
Hey mate sorry for late reply. We don't do them. It was basically a one off for a good friend.
@cancan8467 2 жыл бұрын
Any slower and we go back in time spitting it out ffs
@fasteddie7273 2 жыл бұрын
what are you using for dye Rinder? I have never seen an electric that small.
@buildnboost4561 2 жыл бұрын
Hey mate it is just a cheap Dremel I bought from mitre10 for like $50. Came in a huge kit with a heap of attachments and the flexshaft driven pencil attachment. I think I payed more for a decent burr for it.
@sandarelliott5319 Жыл бұрын
Hey mate just guessing you're not making the series anymore?
@isiahkenny26 2 жыл бұрын
Make me one for xr6t🫣
@buildnboost4561 2 жыл бұрын
We don't do them. Not really setup to do them easily atm. It was a one off for a good friend
@codywillette3738 2 жыл бұрын
Great video bud!
@buildnboost4561 2 жыл бұрын
Thanks mate
@sandarelliott5319 2 жыл бұрын
is it twin turbo? that thing is fucking sick!
@buildnboost4561 2 жыл бұрын
Na man single turbo, can't remember what ci, maybe a 416ci with a powerglide. It's a bloody animal. Makes mine feel like a camry haha
@buildnboost4561 3 жыл бұрын
Thought I'd revisit the comments. This motor is currently making 670ish rwhp. Has about 5000kms on it so far. I'm suspecting that I made the wastegate outlet too much of a priority for the flow and I think it's blowing the gate open early. Makes 670hp at 4500rpm or so from memory and just holds it all the way to rev limit. The boost drops from 14psi back to 8 or 9 at the end of the run. This wouldn't be an issue for a boost controller but just running a boost tee for now until I wire the nexus up. Might make a video on this all soon. Cheers guys😎
@sandarelliott5319 3 жыл бұрын
cheers bro, good vid.
@sandarelliott5319 3 жыл бұрын
cheers bro, not many videos of full tear downs. just what i needed!
@buildnboost4561 3 жыл бұрын
Glad I can help mate, I'm no expert, I've just read how to's in books etc. Ill post the ones I used in a new vid. My last build is turbocharged and currently making 670ish hp at the Hubs. Over 5000kms on it with no issues yet. Ill turn it up some more once my daily patrol is finished and reliable, so I can afford to break the racecar 😆
@sandarelliott5319 3 жыл бұрын
@@buildnboost4561 would you be able to put a vid together about everything that you done to your turbo ls? I want to do it eventually but im not sure what's good and what's not. Thanks.
@buildnboost4561 3 жыл бұрын
What would you like to see mate? I could do one when I find a bit of spare time.
@sandarelliott5319 3 жыл бұрын
so when you say you'll number the conrods, is that so they go back to the same slot on the crank shaft? thanks. would you re-balance the crank if you were going to run a bit of boost or something? thanks.
@buildnboost4561 3 жыл бұрын
Yer thats correct mate. Just because it is already balanced from factory. And I'm not changing anything just cleaning and checking and then reassembling. I didn't on my last ls build. All factory rotating assembly, just new rings and gapped them a bit more. And opened up the bearing clearances a bit.
@sandarelliott5319 3 жыл бұрын
would heli-coils be a good option for stripped threads?
@buildnboost4561 3 жыл бұрын
Yes I would use a helicoil if I had a stripped thread. Havnt had one stripped before luckily. You would have to check some of the holes as some intersect with each other when putting a helicoil in.
@BBanned 3 жыл бұрын
Are you that famous guy from 6boost, do you like turtles?
@buildnboost4561 3 жыл бұрын
🤦♂️
@BBanned 3 жыл бұрын
Is that Tom hanks?
@buildnboost4561 3 жыл бұрын
WILSON!
@BBanned 3 жыл бұрын
Yeah mad
@sheriffboom4311 3 жыл бұрын
Mad. Im getting this done to my 3582. Hope it doesn’t crack. What’s the chances ?
@abdulghafoor2526 3 жыл бұрын
Urdo
@Replayys. 3 жыл бұрын
Im in the video in the blue shit .
@woomdader 3 жыл бұрын
Good job, la soudure a tenue, pas de fente ?
@buildnboost4561 3 жыл бұрын
Thanks mate. I apologise but I don't know how to translate the rest of your comment.
@woomdader 3 жыл бұрын
@@buildnboost4561 no problem, weld has not undergone any risk of cracking with the cast iron after some test?
@pclouw 3 жыл бұрын
What about that internal butterfly flap.. can you basically weld normal mild steel filler rod to just weld it all up?
@buildnboost4561 3 жыл бұрын
Id imagine so. I used stainless and had a bit of trouble with cracking. Had to preheat it pretty hot before I could get it to stop cracking.
@EnvyOCE 3 жыл бұрын
If you're QLD based, got a turbo you can give it a crack at!
@WinginitMotorsports 3 жыл бұрын
Great video brother thanks for posting it 💪
@buildnboost4561 3 жыл бұрын
No problem man. Was a good event. 😎
@jakob31448 3 жыл бұрын
Casually has engine block on stand in the living room
@rbcef 3 жыл бұрын
That’s awesome would never trust myself to do that to my housing lol
@buildnboost4561 3 жыл бұрын
It was a cheap housing of a mates, dont be scared to give something a go. :)
@jasonwalton1985 3 жыл бұрын
That's not an L98 That's an LS
@buildnboost4561 3 жыл бұрын
Definitely is an L98 😎
@christopherduby5330 3 жыл бұрын
Its l98 just upsidown !
@christopherduby5330 3 жыл бұрын
Its upsidown mate
@callummekkelholt6315 4 жыл бұрын
hiya where do i contact to get one made cheeers!!!
@buildnboost4561 4 жыл бұрын
Sorry mate not currently taking on any work. Happy to talk you through it if you have access to a tig welder though.
@cameronrcowan2089 4 жыл бұрын
What material should be used?
@buildnboost4561 4 жыл бұрын
For which bit mate?
@Fred82ndAbn 4 жыл бұрын
Nice video! Doing a modern engine swap into a classic right now and in the stage of designing the AC system. I was about to buy a crimping tool ($$$$) but those would serve perfect at a fraction of the cost of ferrule and crimping system.
@buildnboost4561 4 жыл бұрын
Im not sure exactly where they are from. I got them through a mate that does AC stuff. The brand of them is Highgate air. Thier phone number on the packet is 1800 15 15 15 Part no# for a -6 45° is HFE-85746 That may help steer you to the correct range of fittings. This is in AUS too.
@slimer13b 4 жыл бұрын
Why did you put it in the lime?
@buildnboost4561 4 жыл бұрын
Holds the heat into to housing and takes hours to cool down.
@H427-m4y 4 жыл бұрын
👌🏽✔
@buildnboost4561 4 жыл бұрын
Sorry for the massive delay guys! Life got in the way and making some big changes in my life. Hopefully be back into working on the ute and producing some more content shortly!
@zenvibesonly7728 4 жыл бұрын
Where do you buy the engine parts?
@buildnboost4561 4 жыл бұрын
Few different places man, where about are you located?
@zenvibesonly7728 4 жыл бұрын
@@buildnboost4561 I’m in Los Angeles California, but I’m not from here.
@buildnboost4561 4 жыл бұрын
@@zenvibesonly7728 we're in AUS, any decent performance shop should be able to supply the parts. Its just hard to know where to get them. As I've had substandard parts delivered even from the so called best in the business workshops.
@TURBOTRISTO 4 жыл бұрын
might be an idea to go back and update thumbnails and titles and add descriptions to all your videos
@buildnboost4561 3 жыл бұрын
Just seen this haha. Yer starting to get back into it. Ill try address this soon
@TURBOTRISTO 4 жыл бұрын
Built for boost
@TURBOTRISTO 4 жыл бұрын
Can’t wait for this to be done and make some jam!
@TURBOTRISTO 4 жыл бұрын
Nice vid
@TURBOTRISTO 4 жыл бұрын
Keep it up
@TURBOTRISTO 4 жыл бұрын
Hopefully some comments help the KZbin algorithm !!! Keep up the good work man !!!!
@buildnboost4561 4 жыл бұрын
Cheers bro
@TURBOTRISTO 4 жыл бұрын
Build'n'Boost no worries man keep the comments flowing it’s very important for the yt algorithm
@danaber5738 4 жыл бұрын
Ready for all the boosts now
@buildnboost4561 4 жыл бұрын
He plans on wasting a heap! Haha bloody falcon owners hehe
@THEMADDGUY096 4 жыл бұрын
Fukn kane.... what a head!
@corkforbrains 4 жыл бұрын
Don't take life too seriously m8.. You are doing fine and it's a pleasure to subscribe to your channel! Look forward to seeing what you are up to!! ~Ed
@buildnboost4561 4 жыл бұрын
Thanks man, prob came off as a bit of a downer in this vid, but I can assure you I enjoy what I'm doing. All the set backs that I've had are what drive me to learn new skills and what have got me to where I am today! Glad your enjoying the channel, cheers Dan
@darcyc8847 4 жыл бұрын
I hate wiring too!! Haha
@buildnboost4561 4 жыл бұрын
I really didn't think I'd have issues. It's got Damn fire sleeve around it haha. Might need to do a better job of insulating the whole terminal next time.
@buildnboost4561 4 жыл бұрын
Apologies for the crap lighting, something to be mindful of next time.