Thank you!

They are the Sunf flat track tires. here's a link on amazon. What I bought was 19x7-8 but those aren't listed any more. I see they have 20x7 -8 though. www.amazon.com/gp/product/B01N25SL6B/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Sorry but I have zero experience with the live valves. I know there's been a considerable amount of talk on the Facebook groups about doing it but not sure if anyone actually has.

I just got a reply from Jamie at RaceCo which clears up my Live Valve specific questions. This info is probably limited to pre 2023 models. He says that his EPS kit will not interfere with the operation of Live Valve suspension as long as you leave the sensor on the rack and pinion, which i plan to do. Another vendor recommended RaceCo saying that the EPS is actually the same as SATVs but the shafts and U Joints are much higher quality and last longer.​@terryhatfieldmin

@@stevelash5821 Jamie is a great guy and really knows these machines forward and backward. His kit definitely has higher quality shafts. The Super ATV stuff is comparable quality with the OE stuff. If I were racing I would certainly go with the Raceco. The Super ATV kit has been bulletproof for us.

If you're happy with it as is then just leave it alone. If that's close to the same as it was when you first did the springs you are fine. If not you can dial in a little more preload.

Hate to be vague but maybe. Has the ride quality or the ride height changed over that time? If so then they probably do. If not then nothing more is needed.

Thanks!

Thank you!

The hinges were brand new.

I did use the 3rd hole. There is support for that in the trailer.

​@@terryhatfieldmin awsome. Thanks

You certainly could but I did not.

Just push in the white valve levers under the trailer and set the levers in the wet bay to fill and start filling. The first will fill a little faster than the 2nd. These trailers are notorious for leaking water out the vent tubes when you are going down the road. Many of us used Shark Bite valves from the home center to stop that water loss from the blue vent lines. Very important to open those valves when filling and when using the tanks. Here's a link to another video where I show the valves and how they work. Lots of good info in the video but about 16 minutes in are the valves.

Ok. The "white valves" are the 1.5 " drain valves? Ya those should be closed for sure. I might end up doing shark bites and valves in future. I can see why u want those open while filling. Also the previous owner of my camper stated that he had trouble getting water into 2nd tank. He said he had to fill slow in order to get water into second tank?

@@fozzybear9114 The white valves are the drains. The Shark bite valves solve the 2nd tank fill issue. Once water comes out of the front Shark bite I close it and it helps to fill the 2nd tank.

Thanks!

It's been solid. We have been very happy with it.

Thanks for watching! Glad the video was helpful.

Thank you!

Thanks for watching!

We've been very happy with the 31G. It's performed well for us.

Thanks!

Don't see why not.

Thanks for watching!

I still very seldom leave a stock wheel on anything. I'm usually picking out the wheels before I even own the vehicle. :)

As far as I know they have not changed the basic construction of the trailers so the studs are still aluminum with wood inserted.

@@terryhatfieldmin thanks!

@@dawnebner2926 Glad to help.

The Weigh Safe has performed flawlessly for us. We tow in all sorts of different configurations with and without the SXS and with and without water in the tanks. We've been able to do so with no issues at all.

Thank you!

I suppose that is completely dependent on how much money you want to spend to get that horsepower. I've been happy with the increase we've seen with the intake, carburetor and exhaust changes we've made.

@@terryhatfieldmin How much power are you pushing out of that engine?

@@tonymaurice4157 No clue. It's never been on a dyno.

@terryhatfieldmin What's your best guess. It's 302 right? Are you even a mechanic? You knew what was done to it but you have no idea the power output.. That's the modern collector for you. Lol

@@tonymaurice4157 Thanks for assuming way to much. I was in the body shop/restoration business for over 40 years. It's not my first day. Thus I've learned not to guess on power output and not to trust anyone else's guess. I currently have and have had other cars that have been on the dyno. I'm happy to share those numbers because I know they are real. But since you are so determined for me to guess, according to Ford the stock 302 2 barrel made 139 hp at the wheels new. It might make 200 at the wheels now.

It has the serrated rollers but I work almost exclusively in white oak so the roller does not leave any marks that are an issue. It also feeds well with fairly light pressure on the rollers.

It's a great idea but the way we have the garden set up is not really conducive to letting them in.

Thank you!

I need to install this on my live valve too. Does the Live Valve still communicate and work properly with the steering light grounded? Have you noticed any difference in the suspension after this mod?

Hey Colton. Ours is 36"x65".

Awesome we have the 29G momentum and thinking it’s same dimensions but will make sure before ordering love the video keep them coming!

Thanks! The showers are identical in both trailers.

Perfect I’ll order that then! Installing process difficult or somewhat easy? Also the lights you wired for garage under bed area you have video on that process I was trying to understand how you wired to that light but not 100% on how exactly you did it. Plus it looks clean and still adjustable with that cord.

@@coltonvalandingham4144 Pretty simple install on the shower door. If you do Facebook we have a group just for the 29G/31G trailers. Tons of info there including a thread where I show the installation process. facebook.com/groups/momentum29g31g/permalink/236840871343757/

Awesome!

Hey Mike. The shocks have been amazing. No issues at all and the ride is incredible. I was not expecting them to be this much better that the spring kits with all the work on the stock shocks but they are.