Darren 67-72

Пікірлер

@merleelsing2211 5 күн бұрын

How much is your truck worth? That’s a loaded question! It’s worth what someone would pay for it any particular time! Nice ride!

@Wrenchen-with-Darren 5 күн бұрын

Spot on. We can only guess, what we can get out of a vehicle. Thank you very much, for your comment!!!

@mikeabresch3827 5 күн бұрын

Nice I am doing a 69 GMC right now had to change alot of stuff and if you look at it you would never know

@Wrenchen-with-Darren 5 күн бұрын

Not all progress is obvious to everyone. Commonly, people don't appreciate the amount of time it takes to build an old vehicle. Thanks for watching and the comment!!!👍

@karmennash7479 6 күн бұрын

Lots of technique & tools to get it done and done right… right enough for older, used and abused vehicles. Good work.

@schaferspeedshop 6 күн бұрын

The camera quality is definitely better with this camera. Truck is coming along nicely!! Oh and yes... Wear them gloves cause we don't want to cut a tendon 🫣

@schaferspeedshop 6 күн бұрын

That is turning out great! That clock is badass too!

@Wrenchen-with-Darren 6 күн бұрын

Wait till you see next weeks video. 😂 And thanks, it is starting to move in the right direction.

@eddieraines2647 6 күн бұрын

I know very little if any about body work but, if the rear cab corner is original and the door fit that corner, why not cut the replacement rocker and make it fit the cab corner instead of cutting the cab to corner fit the rocker? By watching all of the C10 repair videos out there, it's clear that the replacement panels are not very good. The door bottoms, do they have a brand sticker on the inside? That might help the rest of us make a decision on which brand to look for. Hope you and yours are doing well Darren. Merry Christmas and Happy New Year!! See you next week.

@Wrenchen-with-Darren 6 күн бұрын

@@eddieraines2647 The cab corner has been replaced, it was fairly well done. My decision was made by how well the other panels fit. I hope I made the right choice, we will soon see. Sorry, the door bottoms are so old, no distinguishable markings are left. But I'll be ordering one for the passengers side, soon.🤞 Merry Christmas and Happy NewYear to you, and all. Thanks for your comment Eddie!!!👍

@GPVlog 11 күн бұрын

That truck is night and day from one side to the other. Nice clock :)

@Wrenchen-with-Darren 11 күн бұрын

You are so right!!!! Thanks for watching 👍

@boostnhoe 14 күн бұрын

What test fuel tank, where'd you buy it and how many gallons is it? Thank you for the video

@Wrenchen-with-Darren 14 күн бұрын

@@boostnhoe I use a fuel tank from LMC it's a 21 gallon. They also make a 17 gallon. I will revisit the fuel tank in a later video. I might suggest the 17 gallon, for better fit. Thank you for your comment!!!

@georgewoodland1766 16 күн бұрын

Wow a right hand drive C10😊

@Wrenchen-with-Darren 16 күн бұрын

Lol, sorry I hit the mirror button on that video. Thanks for watching!!!👍

@karmennash7479 21 күн бұрын

Spanish gooooold!

@eddieraines2647 21 күн бұрын

I spotted it within the first few seconds today. Looking good Darren. That passengers side is going to be FUN!! That's a little sarcasm.....lol.

@Wrenchen-with-Darren 21 күн бұрын

Hi Eddie, my most loyal commenter. Thanks, I am currently working on it. And yes, it is actually fun.... so far. Lastly, I do enjoy me some, sarcasm and a little "snarky" from time to time. Thanks always for your comments!!!!

@Wrenchen-with-Darren 21 күн бұрын

Oh, I'm going to make next weeks hunt a little more difficult. 👍

@karmennash7479 22 күн бұрын

You could’ve made that rotted out Olds 88 convertible new(ish) again. :). All the rust, weld, gussets, reweld & bondo.

@Wrenchen-with-Darren 22 күн бұрын

1988 Oldsmobile convertible. Those were nice old cars.👍

@dazeofgloryshopworks5806 22 күн бұрын

Once is good, but twice is definitely more gooder..... but don't do three times because then you're just showing off 😂😂😂

@Wrenchen-with-Darren 22 күн бұрын

🤣😂 too funny!!! Thanks for watching!!!!

@karmennash7479 24 күн бұрын

Spanish gold road ready again!

@DazCoons 29 күн бұрын

This is a how not to do repairs

@Wrenchen-with-Darren 29 күн бұрын

@@DazCoons thanks for your comment. I'm glad you were able to take some away from the video.

@DazCoons 29 күн бұрын

You would be better as a butcher

@Wrenchen-with-Darren 29 күн бұрын

@@DazCoons you ain't seen nothing yet. Thanks for the comment.

@DazCoons 29 күн бұрын

Mate -- Cut down on the drinking before doing a video -- A drunk idiot wont get you far -- You would make a great clown

@Wrenchen-with-Darren 29 күн бұрын

I tried being a butcher and I'm not very good at it. Yes, I'm a bit of a clown... but not so good at that either. Thanks for your comment. 👍

@Mrkoolguyair Ай бұрын

Thanks for the tips. I learned something today.

@Wrenchen-with-Darren Ай бұрын

Aw man, Thanks🙏 I appreciate the comment and thanks for watching.

@HaleHankockloving Ай бұрын

Fix it right

@Wrenchen-with-Darren Ай бұрын

That's the only way.👍

@DiamondMNathan Ай бұрын

I’ve used a painless harness on the bronco too, highly recommend them, even though they are speendy! Worth it!

@DiamondMNathan Ай бұрын

I’ve wanted to try those efi throttle bodies. Just have yet to bring myself to pay for it😂 I hear y’a on the transmission dipstick! My early bronco does the same thing! Gonna just buy a new pan, one day…….. haha. Until then.. I’ll spend more on oil.

@Wrenchen-with-Darren Ай бұрын

Thanks for stopping over here. Yes the efi is nice, but a carb is way easier. Take care.

@omargarciahernandez2392 Ай бұрын

Felicidades dame una que envidia😂

@Wrenchen-with-Darren Ай бұрын

Thank you very much!!

@The-Vinster Ай бұрын

Thanks for sharing your knowledge with us 👍I restored my dad's 67 back in the 90's when i was 15. He couldn't figure out why all his (wood)drill bits were dull.😂

@Wrenchen-with-Darren Ай бұрын

That's awsome!!! Kids that figure out how to fix things, on their own, grow up to be critical thinkers. You made great memories. Thanks for sharing!!!

@eddieraines2647 Ай бұрын

Spotted! Hope you and yours have a Happy Thanksgiving Darren! Just and FYI, I gave the JB Weld as a metal bonding agent on my truck. I've got my fingers crossed it'll hold in the long run.

@Wrenchen-with-Darren Ай бұрын

Happy Thanksgiving Eddie. I'm confident, the JB will not let you down. I've used it on hydraulic lines, temporary and it held great.

@ThomasofAkron Ай бұрын

Enjoying your video. First time watching. This will help me on my 71

@Wrenchen-with-Darren Ай бұрын

Welcome!!! I'm glad to help, if I can. We can always learn things together. Thanks for saying hi.

@eddieraines2647 Ай бұрын

Spotted it! Good stuff as usual Darren. Since it was brought up, what brand panel bond are you using? I've got a 2014 Silverado that has a loose support for the bottom of the rear fender has come loose. I see JB Weld has a panel bond. Ever use that?

@Wrenchen-with-Darren Ай бұрын

@@eddieraines2647 JB is good stuff!!! I perfer 3M. Most times, small batch use is easiest with JB. They have catered to this by making easy mix, single packs available at local stores. Best tip; don't clamp with excessive force. As always, thanks for your comments!!!!👍

@schaferspeedshop Ай бұрын

The tweezers!! Lol... Ya just never know what you're gonna find😜

@Wrenchen-with-Darren Ай бұрын

Stay tuned, there's more!!!!

@cliffolivent7901 Ай бұрын

Sir where do you get the panel bond

@Wrenchen-with-Darren Ай бұрын

@@cliffolivent7901 panel bond can be found at automotive suppliers that sell bulk paint. Or on line, like Amazon. Thanks for watching!!

@karmennash7479 Ай бұрын

#Tweezers

@ClassicChrome86 Ай бұрын

Beautiful truck and congratulations on 100 episodes! Just subscribed. Really enjoyed the video. Thanks for posting.

@Wrenchen-with-Darren Ай бұрын

Thank you for watching AND your subscription!!!! I try to make it fun and show the details others don't. I look forward to seeing you in the future.

@cliffolivent7901 Ай бұрын

Thanks for video I am trying to work on my 72c10 I am learning alot thks

@Wrenchen-with-Darren Ай бұрын

The 1972 is probably the best year truck, with all the GM improvements. If you ever have a question feel free to ask, I'll try my best to answer and show a process. Thanks SO MUCH, for your comment!!!

@eddieraines2647 Ай бұрын

Maybe sometime later down the road, how hard is it going to be to separate panels that are bonded together? Just curious. Spotted the locktite.

@Wrenchen-with-Darren Ай бұрын

Well, good question. Pretty much not going to happen. You could use a lot of heat, but that's not so good. Most of the time, you have to cut back more. Its permanent, and why I make every effort to block rust. A collision repair would require larger panel replacement. Thanks Eddie.!!!

@karmennash7479 Ай бұрын

The patience with doors, whew!

@Vern.Anderson 2 ай бұрын

Which hoods do you like best 67 + 68, or 69 - 72?

@Wrenchen-with-Darren 2 ай бұрын

@@Vern.Anderson I perfer the 67, the 68 has the odd trim at the leading edge. But, they now make a 67 sloped hood that fits the later year trucks (lines up with fenders). I think I like that look the best. Thank you very much for your comment!!!

@eddieraines2647 2 ай бұрын

Spotted the orange, thanks to the hint.......I enjoy watching the metal work, uh ohs and successes. Keep it coming!

@Wrenchen-with-Darren 2 ай бұрын

@@eddieraines2647 Thanks for your comments, Eddie!!!

@schaferspeedshop 2 ай бұрын

Dash looks great! Thinkin I will just buy the right outer rockers to make it easier 😉

@Wrenchen-with-Darren 2 ай бұрын

I appreciate the offer. But not necessary thank you very much

@karmennash7479 2 ай бұрын

Inner, outer. Outer, inner. Nut. Never as easy as you make it look. Wow.

@karmennash7479 2 ай бұрын

“Body hammer”. We all are looking for one. 😁

@karmennash7479 2 ай бұрын

Sorry you lost Rusty 🐈‍⬛. 🥺

@Wrenchen-with-Darren 2 ай бұрын

@@karmennash7479 I'm not much of a cat guy, but I did like my cat "rusty". I miss him.

@wecharg 2 ай бұрын

Nice stove shop! You paint planes too?

@Wrenchen-with-Darren 2 ай бұрын

Can't say I've ever panted a plane, but I'm up for a try.😁 Thank you for watching and your comment!!!

@Vern.Anderson 2 ай бұрын

I'm finally caught up on videos. I have now watched them all since finding your channel! great series! nice work! I picked up a lot of info and will continue to watch and follow for more.

@Wrenchen-with-Darren 2 ай бұрын

Thank you so very much. I'm always working on something and will continue to attempt to improve the channel.

@karmennash7479 2 ай бұрын

Lots of little hand movements to finesse that surface. Looks way easier than it is! Wow.

@eddieraines2647 2 ай бұрын

Great tips Darren. I know when it comes around and I do finally get one, these will come in handy. I like the chisel tip. I like the working of the dent, the sanding of the "hail" dents. One other thing, I haven't been seeing the lcotite the last few videos. Still doing that? One more question since you mentioned your shop lights...what are you using? I am wiring my new shop and getting ready to purchase lighting. I like how well lit your garage is. Keep up the great work.

@Wrenchen-with-Darren 2 ай бұрын

I'll show my shop lights in a future video, they are screw in LEDs. Yes, still doing the loctite. I did miss a few videos, sorry it is kinda fun. There is one in this video, orange. Thanks so very much for all your comments and questions!!!

@Wrenchen-with-Darren 2 ай бұрын

@@eddieraines2647 I'm going to put a hint, time in the description, from now on. It will be in the screenshot at that time. I have had others ask for hints. Hope that makes it a little more fun. 👍

@karmennash7479 2 ай бұрын

👍🏼

@schaferspeedshop 3 ай бұрын

Lmfao! Best content yet🤗. Just call you Houdini cause how in the world did that rear window not break 🫣. Made my week... 😜

@Wrenchen-with-Darren 3 ай бұрын

@@schaferspeedshop I think I rewatched it 5 times. It went all the way to the floor.

@karmennash7479 3 ай бұрын

Excellent salvage job.

@karmennash7479 3 ай бұрын

Holy cow! Wow.

@eddieraines2647 3 ай бұрын

Nice work Darren. Amazing work with the glass. Sometimes, it's great to be lucky and the glass survives!!

@Wrenchen-with-Darren 3 ай бұрын

Lol, I'm not sure how many people will watch long enough to see that part but, I knew I could count on you!!!! Thanks again.

@GPVlog 3 ай бұрын

Cool car

@Wrenchen-with-Darren 3 ай бұрын

Yes, they kinda are. A LOT of stuff that can go wrong too. Great to see you here again.👍

@GPVlog 3 ай бұрын

@Wrenchen-with-Darren "alot of stuff can go wrong" I would argue that today's gas cars are more complex than this volt. More sensors, more EPA crap, more stuff to go wrong. Gimme a square body any day.

@karmennash7479 3 ай бұрын

Happy birthday. Work, work, work. 😁

@Wrenchen-with-Darren 3 ай бұрын

Lol, thank you very much I just can't help myself

Ең жақсы KZbin

Пікірлер