Loved seeing the Simon repairs. I used to have a Pocket Simon.

End of line....

Yes there are Battlezone possibilities. •Vectrex + ROM only, via James Watt's (Clockwork Robot) "Stramash Zone". Stramash Zone is a great game conversion but is still CPU bound with the processing limitations of the Vectrex •Vectrex + VecFever cart + Atari Arcade ROM. Play much better using the processing power of the VecFever cart along with the Vectrex CPU. Since it's using the Atari arcade ROM closer to the original game play. •Vectrex + PiTrex cart + Atari Arcade ROM. Plays much better using the processing power of the PiTrex cart and none of the Vectrex CPU. Since it's using the Atari arcade ROM closer to the original game play.

3:57:33 You can spellcheck="true" to your <input> elements to enable spell check without having to make them a <textarea>.

Nice work!

Typical Noctua fans will not move enough air for a 2U server. Quiet yes.

RIP fun with Zork.

heck i used cura slicer and didnt do the updates on the mosfets my printer was just 3d print upgraded so much and was just load filiment and go aside from putting more painters tape on wen needed and use alcohol on it .

i had an a8 and that thing with several tweaks was able to print at a .5 mm resolution on the clearance test print i did though that was before i borked several things on it . the upgrades i did was a full surround cooler for the nozzle x and y belt tensioning prints and gantry bracing well . i also went through and made sure all the steppers were oiled up as well . after the upgrades i could have a conversation around it with out having to raise my voice

This was fun. Currently working on 'silencing' my server too, only with bequiet silent wings fans. I've add 3 more fans over the stock for the case, and am about to explicitly cool two of the six hard-disks with two more, having relocated the two drives to the 5.25 inch bays. (They all fit into the 3.5 in drive bays, but over the summer, a couple of the disks went over 40 degrees C, which while still in specification, is too warm for me! Want the drives to always be below 40.) Using a PWM generator to control the fans that are cooling the disks (rather than the mobo) - at the moment just the two fans bolted to the hard-disks, but will migrate the 3 existing stock fans (which are noisy, and not PWM) over to my PWM system when I've bought three more bequiet fans. Bodging it hard, could really do with a 3D printer and the time to figure all out. Impressed with the designing in python.

I know late to the party, but if you dont put some blanks or drives in the open slots, you will not get an accurate noise or temp floor. Deltas on sound/temp change might be close but might also be way off. I noticed this with R730XDs with open drive slots drive temps climb and cpu temps drop.

UTF-8 is a superset of 7-bit ASCII, so it makes sense that it'd work up until people started using higher unicode characters.

A lot of old BBS Door games, simply filtered out *ALL* control chars (EG: Control-C) You could have a small batch script that just keeps re starting the game

Watching the chat people attempting to play Zork, is basically akin to a room full of monkeys attempting to reproduce hamlet with typewriters.

I think the best save formatting would be something like (game-)platform-userid, it leaves enough options for future expansion, but I don't know if usernumbers are too long for DOS

In developer menu on android phones you can usually set the screen to be always on while charging

Good stream. Enjoyed the vacuuming!

Shelby if the thing you're tagging already has a UPC / barcode, why go to the trouble of adding a second tag? Take advantage of the barcode which is already there?

This was a good lesson into how sensitive transistors are

Ridiculous they didn't have a 555 chip on it, think of all the extra possibilities that would have added! I always wanted a kit like that, but was given a chemistry set instead :(

Hello I'm new have you heard of eXoDOS 6.0 it has 7000 DOS games that can run on modern computera

Great memories.

using melamine sponges wet just gives you a very good sponge! I never use them dry unless you want an abrasive but when wet it does a great job cleaning a lot of stuff

No way! My dad has the same kit!

The green unstripped wire is an FM antenna

I am electronics tech, wire biter, and amateur engineer. I got my start when I was a teen with an electronics kit that I found at Radio Shack!

I had this exact model as a kid in the 90s

I forget which one I had, but i loved my Radio Shack XX in One lab and it's sprint connectors and wires.

built the weal of fortune and messed up like twice but fun build lol.

that kit taught me how to make a super powerful jaming device you leave line 50 unhooked on the frequency shift osolator and wen you press the pattle as you call it it will transmit your voice over the cable band wile knocking out the tv from over 50 feet away !

I got something very similar to this from Tandy (UK version of Radio Shack) for my fifth birthday, only mine worked ;-) I seem to remember making a lot of radios. I used to have a long wire going off to a radiator for ground, or on a screwdriver stuck into a big plant pot! Somehow it always worked.

The Radio Shack XX in 1 kits are what I used. I've always thought they could be used with a Raspberry Pi or similar SOC to have an update for today. The original kits were in a wooden box

absolutely love electronics kits thats how i got started with playing with electronics wen i was 8 years old. it set my life from that day on. ive been playing with electronics for over 41 years now

Why do you not want to use ZFS? I personally use it on my Debian/Arch Linux system. (I use it both for gaming and storage.)

Too much waffle & silly speech synth, not enough 'getting on with it', sorry

Want to see some weird serial stuff on this

36:00 Direct from the Shelby Sex Dungeon: Fifty Shades of Beige

You are the best Shelby.

VGA cable quality really does matter. Cheaper thinner ones give you a noticeably softer picture.

I'll switch to Linux when installing something is made universal and one click. No one has time for all of that work.

For all VOD watchers, The Static attacks from 2:11:35 to 2:12:05 Almost made me crash my virtual semi truck :P

Intel Quicksync is pretty good at video transcoding, from what I've heard.

All going on in this stream, and it worked out in the end, fun times!

i'm surprised that i never knew that these streams were also on youtube. that makes it a lot more convenient, mainly because twitch's vod player suuuuucks.

theres a person selling one of these complete in box. you might want to contact them and see if they are willing to send any scans or files you would need

loading... - DUUUUUDE! Excellent choice playing Patrick Phelan's Night Train Super Famicom Mix from Top Gear 2! ([ahem] Top RACER. Sorry, BBC...) I even started one of my old cassettes I recorded for shiggles as a kid with that one! XD 4:02:18 - The "Biiingo--oh my gosh!"[FEEDBACK] heard 'round the world! XD

Awww what a shame.

Try booting an older Linux "Live CD" one that still supports the older 32 bit intel chips. If it can talk to the network card etc; then you know the hardware is OK. Win95 & 98 are the reason I moved to Linux in the first place. But a Linux boot-cd was often my favourite trick to diagnose HW setup issues

Good livestream. Weird how switching camera sometimes triggers the keyframe issue or whatever it is. At the end your voice was several seconds out of sync but the printer sound was in sync... 🤔