Wat kind of screwdriver do I need to remove the screws
@a_username33604 күн бұрын
T8 and T10 *I think*
@dogekid77664 күн бұрын
I just broke the ribbon what do I do noe
@xdsmastermia5 күн бұрын
Has anyone done this to replace hard drive with ssd? If s so how does it perform?
@scottdavis65645 күн бұрын
managed to take the underside casing off, but none of my screw drivers fit the screws, the "screws" look more like rivets, so pretty much a useless video
@releasethedogs6 күн бұрын
Did you find Harry?
@maddymonac9526 күн бұрын
Nice video. I'd trim them nails tho
@mugiwara95997 күн бұрын
The ribbon that connects the L1 and L2 was already loose, the one side not connected to the motherboard and it came out. This might be the most tedious thing I’ve tried to put back in a long time. Can I kinda be rough with it or is it very delicate? Edit: NVM I was able to eventually put above the slot then just tap it in with the screw driver head.
@simplysusan879 күн бұрын
Tell me I’m poor without telling me I’m poor. I’m here in 2025
@Drumblanket8 күн бұрын
@@simplysusan87 Good to see.the video is still serving people all these years later.
@GordonPriceBMX4 күн бұрын
Same
@tnyswrld36713 күн бұрын
Same but not poor
@mooktheonemanmafia9 күн бұрын
thanks to you, ima able to customize my own controller 😊
@veikkaheinonen89711 күн бұрын
Fucking broke my 3ds
@agamerspovlive506312 күн бұрын
Reassembly???
@dwarvenllama713412 күн бұрын
Thank you.
@Averagejoe010512 күн бұрын
I have to fix either the fan or the thermal compound so thanks for showing me
@_IP.ADDRESS_13 күн бұрын
My 3ds xl is randomly shutting off at random times, does anyone know how to fix that?
@josephamicallef623013 күн бұрын
Hello, I have nintendo ds it reads the game however when I select the game it turns into a black screen and nothing happens … what should I do please?
@wendyk.569413 күн бұрын
Definitely helpful! My niece got something sticky around the square key and it wasn't popping back up... Disassembled after a bit of a fight with the frame (popping it open on the outer side of the L and R keys helped a ton! Then near the ext. and headphones holes...). Don't be afraid to take it apart following these instructions, I didn't even need to search up how to reassemble it back together. The only tricky bit was the board's optic cable and i used tweezers to help with that
@LizardKing437115 күн бұрын
Thanks for this. ✌️
@zazamouk7516 күн бұрын
Yeah. Ripped one of the 2 mics ribbons when lifting the circuit board. Definitely found that step after that in another video with a clear warning ⚠️ well i know where the thumbs up goes and just buying a new controller now.
@TimMedina-dt4cl20 күн бұрын
thanks that was helpful 👍
@CooterMonster24 күн бұрын
My Xbox 1 x just started shutting off ,I can't get the top off it's Christmas and I can't find a way to fix this other killing myself plz fucking help it's all I got
@Amariproduction24 күн бұрын
Bruh i popped the wire 😢
@techfly328 күн бұрын
me trying to make my own stellar blade custom controller
@DragonLawyerАй бұрын
Looking forward to the eventual Xbox Series S/X console videos 😊
@Mochi-le2nvАй бұрын
THANK YOU SO MUCH! It was tough taking apart something for the first time but this video helped so much and it actually rlly did fix my stick drift issue (even when the insides weren't visibly dirty). It was impossible for me to put the front case back on without removing the touchpad! I would recommend just taking it out first haha
@JustinCheneryАй бұрын
what is the screw driver to take the metal sheet off?
@jamescanfield7779Ай бұрын
Thank you I'm new to PlayStation and I dropped my controller and it didn't work so I had to open it but I was having trouble getting the thing off I didn't know you had to separate it after unscrewing it so ty
@BackWordsJaneАй бұрын
I have experienced unexplained incidents in my house as well. I heard pounding on my front screen door a couple of times in the middle of the night and no one there. I have a pantry door that's difficult to close and then open up again so I always leave it open. One early morning I got up,went to the kitchen and found it closed. I live alone. I have captured a few unexplained EVPs like the faint sound of music and the whimper of a child
@HappyDead1Ай бұрын
This helped alot lmao I just fixed my brother's xbox
@juggernautIBАй бұрын
Helped me a lo t when I noticed that loading in games were absolutely stupid. I took it apart (thanks to you), replaced (Cloned) HDD with an SDD Samsung, popped it back in, did OSU1 USB, installed and everything went fine. Thanks so much <3 Good video
@SleepyBaseball-vv1knАй бұрын
Im trying to clean the discord reader on mine and I dont have the right screw driver to open it is there any other way to clean it?
@uniqueamusementsАй бұрын
Hey I have a business that specialises in kids rooms. With the xboxes they keep going online which I don't want . What would happen if you removed the Wi-Fi board. Would the Xbox recognise this ? Thank you
@DrumblanketАй бұрын
@uniqueamusements well no, but the issue there lies in these consoles need updated periodically and if you dont keep it updated, new games wont work. There are parental settings that can set up cerfews for kid owned consoles.
@johnstanton4560Ай бұрын
Be careful on the two belt buckle looking pieces that hold on to the back cover. Broke mine because..... just pry it, no problem guys.... no idea how to do it right.
@jessicahart3275Ай бұрын
3:45 did they change the controllers? I don't have screws on a cradle like he says here and im stuck
@chandlerharris8306Ай бұрын
i can’t get mine out of the top casing someone help🙏🏼
@RoarStazeАй бұрын
Btw those ribbon cables dont connect your l2 r2 l1 r1 buttons in fact you dont need them its just the haptic feedback and every cable removed and the controller will still work. You just need the big blue cable on the top for the controller to function as a regular controller that is without haptic feedback, a mic, and mute button
@zombiedeutschАй бұрын
Are you still active on KZbin, i have few questions if you may. Why is my controller buttons (touchpad, start and select) has sticky/ like they make loud clicking and get kinda stuck momentarily when pressed. I bought it second hand, it works good otherwise but it's kinda annoying. Is this fixable by taking it apart maybe the previous owner didn't put parts back correctly
@DrumblanketАй бұрын
I can only assume youve had the controller for a long time. Dirty hands are the culprit, My friend. It happens. Take it apart and give it a good cleaning.
@zombiedeutschАй бұрын
@@Drumblanket it is second hand and i bought it like this. I followed your video and decided to disassemble it, it was mostly clean but with some build up on the side of the touch pad, i grinded it and when i put it back together it was good again. I am good with ps3 controllers, the ds4 was much more annoying, especially reattaching the back cover flex cable. I also swapped the battery, but battery life is still bad. It charges very fast less than 1 hour and doesn't last more than 3~4hours max. Is this common with v1 controllers?? It's the first v1 ds4 i ever use. My main v2 controller lasts which came with my ps4 slim lasts 8~10 hours easily.
@exsiuseprime5759Ай бұрын
I ripped the other part off from the ribbon paused right before u said be careful im so fucking mad
@ats.14Ай бұрын
lmao
@trevorgarrison4031Ай бұрын
So I took mine apart to clean it and followed the vid step by step and it won't turn on tried plugging and unplugging things and it won't work I don't know what happened
@ryangervais76Ай бұрын
My screws will not loosen at all
@ajaxmatooks4883Ай бұрын
Great video! Question about the touch pad screws, mine only has the second screw you removed, the first one is blocked off. Have you seen this?
@DrumblanketАй бұрын
@ajaxmatooks4883 i have not. Probably a newer version. They change em up every so often.
@MagierLexiАй бұрын
My battery doesn’t look like that it’s in the way of me assembling it someone help me
@shadokeans8154Ай бұрын
Thanks mate helped out alot
@meulenko2 ай бұрын
there's liquid in my screen so imma try this
@Alpha9584.2 ай бұрын
Thank you brother, this helped
@Take0ver4202 ай бұрын
How do you safely take the battery out? You skipped that part and the ribbon cable doesn't want to come out
@TheOnlyOwnedbyCow2 ай бұрын
I can’t get the shell to come apart. I have tried using various methods, but up near the trigger buttons, I just can’t get it. I don’t want to break it. I wish there was a better way to see how to pull to get it off. I have worked up the sides using plastic tools, tried pulling and pushing. It’s just not working.
@TheOnlyOwnedbyCow2 ай бұрын
I can’t get the shell to come apart. I have tried using various methods, but up near the trigger buttons, I just can’t get it. I don’t want to break it. I wish there was a better way to see how to pull to get it off. I have worked up the sides using plastic tools, tried pulling and pushing. It’s just not working.
@katyc23-p2sАй бұрын
I cant get the first part off at the bottom of the controller
@TheTech6602 ай бұрын
You did help me we this vid! Thanks whole lot Brother!
@MTG_156642 ай бұрын
Is there any way to take off the top case without the screwdriver?
@Drumblanket2 ай бұрын
@@MTG_15664 is there a way to not be a scared winkus?