Mine has a burning smell and it works slow when cooled down spinner now it’s just smells like hot smell
@MsLightbarКүн бұрын
Likely a lose or worn belt, could be the motor wearing out though too. With it unplugged, you can get access from the bottom to inspect the belt.
@user-jm4nj7nz6t2 күн бұрын
Their rotator pattern was amazing. Hasn't been seen since on any other brands. 😢
@octochan6 күн бұрын
I can't believe the manual doesn't tell you that's what you're supposed to do with the drain hose
@MsLightbar7 күн бұрын
Lots of hate for this bar, lol. This was made very early on in the introduction of LED warning lights. The offset patterns bugged me and it was tough to like a replacement for the Millennium. Once I got my hands on a Galaxy, I appreciated the engineering that went into it. I really like the first generation 911EP stuff but glad I got my hands on this bar in such good condition too.
@nealgold84427 күн бұрын
That bar has absolutely no character.
@GCHG20148 күн бұрын
One of the worst lightbars ever made. Leaked like a sieve, basic flash patterns, and was expensive. I've said it before, this was a massive downward step from the millennium. Why wouldn't 911EP just do upgrades to the millennium instead of two lightbars and close shop?
@MsLightbar8 күн бұрын
@GCHG2014 The individual components were weatherized including connectors and flashers so no real need to keep water out. It was nice in a way because if one head leaked or was damaged it didn't have the potential to wreck the other components. Whelen LED products were plagued with moisture issues so it was not all that uncommon. I have always loved the first genefation 911EP lights like the millennium. They introduced us to LED lighting, just too bad that when they sold out to Soundoff, 911EP was discontinued.
@tomweber84838 күн бұрын
@@MsLightbar Let me correct something here, they never sold to Sound Off Signal, they gave them a 4 year marketing agreement only. All SOS wanted was customer base and engineering property.
@MsLightbar8 күн бұрын
@tomweber8483 what happened after that? Armor took them to Florida. I dont believe Soundoff ever made any 911EP stuff and Armor was the last to produce any equipment. Pretty sure BAE now holds the rights.
@tomweber84838 күн бұрын
@@MsLightbar No this was from armor Holdings wanting out after the lawsuits were completed. SOS walked away from several state contracts that they could have serviced with 911ep product for as long as 3 more years. AHI cancelled it after SOS didn't fullfill it. But the damage was to late with them having company information
@joed9491Ай бұрын
Much better flash pattern than the standard factory setting
@johnmoore5505Ай бұрын
These bars sucked! I used them in the mid 90s to the early 2000s. They would never stay synced. When you stopped for flash mode, one would be pointed east and the other west 1/2 of the time. The only mode reliable all the time for front and rear warning was full rotating.
@MsLightbarАй бұрын
They use a gear and chain system that kept everything in sync. Yours must have had stripped or bad gears to allow it out of alignment.
@marx769Ай бұрын
My favorite
@JsuttarАй бұрын
Beautiful bar
@barricade-wb3wu6ws2uАй бұрын
Is there a way i can make my code3 rx2700 take downs flash as well?
@MsLightbarАй бұрын
If it does not have a built in flasher, one could be added.
@barricade-wb3wu6ws2uАй бұрын
@@MsLightbar great! 👍 Where can I find a flasher for the light bar?
@MsLightbarАй бұрын
@@barricade-wb3wu6ws2u The Code 3 710/711 flashers have a steady override. You could also browse the features of various LED flashers for more pattern options
@MrShaw082 ай бұрын
there is a pattern I am wanting to find but I cant figuring it out. right at 3:13 in this video is the pattern I want to stay on when i give it power. any help would be greatly appreciated.
@MsLightbar2 ай бұрын
Unfortunately that is not a stand-alone pattern, it is part of a pattern that cycles through a few patterns.
@MrShaw082 ай бұрын
@@MsLightbar is there a way to reprogram the bar to do that or no. thank you for the quick response and help
@MsLightbar2 ай бұрын
@@MrShaw08nothing the end user can do, no.
@kalig36432 ай бұрын
Would you happen to know how to fix the top lid being open while spinning?
@MsLightbar2 ай бұрын
It shouldn't run with the lid open. If it does, it is likely the lid open sensor
@s.mariejones98882 ай бұрын
What to do if the door has gotten broken on the sides.
@MsLightbar2 ай бұрын
Not sure. Some parts would likely need to be replaced. I have not had any issues but it does seem like it wouldn't be too difficult to break the plastic hinges if opened too far.
@tomjoad13632 ай бұрын
Wasn't teh Aerotwin a mechanism of Twinsonic put inside a case of Aerodynic ?
@MsLightbar2 ай бұрын
It's not a direct fit but close. The main difference is the Artotwin base is much thinner so components need different mounts. Otherwise yes, it is refit in the bar.
@FedSigforlife3 ай бұрын
Hey i have a question so i might buy a SLR should i buy all new Pods for it?
@MsLightbar3 ай бұрын
I do not have any hands on experience with the SLR but what leads you to wonder about buying new pods?
@drwheycooler84233 ай бұрын
....I'm so old I remember when these came out...
@raycampbell79443 ай бұрын
😮 hypnotic
@slap_h4ppy3 ай бұрын
Very helpful, thank you!
@MsLightbar3 ай бұрын
Glad to hear it was helpful.
@ScantmanTV3 ай бұрын
THAT IS WILD
@signal12hvac3 ай бұрын
nice!
@johnlagrone50413 ай бұрын
Its almost like one of the patterns from fedsig led tcl.
@MsLightbar3 ай бұрын
I was surprised how many patterns were created from running the 3 separate lights. Easier to see them in person then in the video. Just had to share. Makes me want to go full Clark Griswold with a setup.
@TJE42103 ай бұрын
I was thinking the same with the TCL
@SouthernFarmingTV3 ай бұрын
You sure someone ain't done ate the wrong mushrooms 🍄. That is cool tho
@Jsuttar3 ай бұрын
Sounds like a svp / Carson sa-500
@MsLightbar3 ай бұрын
Sirens are not my thing so I am not sure If/what may have been rebranded. Thanks for the feedback.
@ScantmanTV3 ай бұрын
dibs
@Sigman-xg9mf3 ай бұрын
very cool!
@dtloveless3 ай бұрын
I have the Black+Decker version of this washer and it's been great! I do get this weird bug where the spin time changes from 5 min to 55 min when selecting the L3 load size on the Normal cycle and haven't found a way to fix it other than not using that cycle or remembering to stop machine during the spin cycle. Support said the only option covered under warranty is to have the unit replaced, and I've read reviews where they ended up having the same problem with the new machine. Although I have read one review where the problem just went away on its own. Anyone else?
@vasyutin3 ай бұрын
Same.
@kedrarussell45473 ай бұрын
My own is saying e2 an the water won't pour in the washer
@kedrarussell45473 ай бұрын
I have a 0.9 portable black an decker washer
@Hugolegobyggare3 ай бұрын
Okay Im obsessed with this type of videos
@MsLightbar3 ай бұрын
Always great to hear when someone enjoys them, thank you.
@TheFirebuff173 ай бұрын
Very Nice! This is on my want list of 911EP pieces.
@MsLightbar3 ай бұрын
It is a nice light. I only have the WL version in this and 29. I do have a 1 or 2 of the TD 39 and an LS12 that I will be selling =)
@JETalley3 ай бұрын
Too much pressure builds up and it leaked all over under my sink.
@MsLightbar3 ай бұрын
Do you have this installed under a sink? What built up pressure to leak?
@JETalley3 ай бұрын
@@MsLightbar I hooked it up to my bathroom faucet. Above the sink. Turned the cold water on. Everything went fine at first, until it went into the spin cycle. Water flower under the sink, from inside the faucet. It was like the valve in the machine did not open or close, and just built up pressure, and there was a ton of water still left in the machine. I have normal water pressure to the sink. Everything was hooked up correct as per the instructions.
@JETalley3 ай бұрын
@@MsLightbar I’m going to try and hook it up to kitchen sink, with some alternative adapters, if the issue is the same, I will be returning. It is brand new.
@MsLightbar3 ай бұрын
@@JETalley It works just like a full size wash machine. After hooking it up to a sink/faucet you turn the water on. The washer will fill when it needs or prevent water from flowing in when it is not needed. If the adapter on the sink is cross threaded or not tight enough, it will leak. It sounds more like an issue with the sink or connection or faucet then the washer as that does not create any pressure.
@allen4803 ай бұрын
Who needs a siren, just use the damn noise from that thing’s motors.
@MsLightbar3 ай бұрын
It's actually very quiet. I placed the microphone close and turned up the gain.
@zdfgdssdgsdg3 ай бұрын
Thanks for your video! How can I contact you?
@fiafighterdude3 ай бұрын
I really want to program my 2 bars
@romanbennett85783 ай бұрын
this woman has to be the most bad ass woman on youtube
@christopherdavis95894 ай бұрын
I remember Oklahoma troopers had those R/B that was zigzag!
@MsLightbar3 ай бұрын
It was in the standard pattern package. MN State Trooper car was the first time I saw that pattern, love at first sight, lol
@Yousee_Davis4 ай бұрын
I love the video! I just activated the sync function on one of my liberty bars today. However it just alternates from one side to the other. How do you go about changing the sync patterns like you did in your video? I tapped the programming wire (wht/purple) to power when it was activated in sync mode with no changes. 🤷🏽♂️
@MsLightbar4 ай бұрын
The one pattern wire will change all of the light functions including the sync patterns. If it is not working, I would confirm by trying to change a normal non synced pair of lights. You can also change the TD/alley patterns, arrow patterns and cruise light brightness with the single pattern wire. It will change anything activated at the time so make sure to only be running what you want to change the pattern on.
@wjye4 ай бұрын
The first one is my favorite. That’s just cool!
@TJE42104 ай бұрын
DVI and Jersey Sweep before it was cool!
@Rotorljus4 ай бұрын
Nice!
@SplitSecondTowing4 ай бұрын
AHA!.....Thats them, thats those oscillating units that i put into my Star bar....you removed them here......what are they called?? Thanks.
@MsLightbar4 ай бұрын
They are referred to by several names and several manufactures have their own version. TCL (traffic clearing light), Metior, Oscilaser are the main ones. Some just sweep back and fourth while others move up and down too.
@SplitSecondTowing4 ай бұрын
@@MsLightbar Yes....Oscilaser, thats it....code 3 Oscilaser.......Thanks. I just this week picked up a very basic Star bar locally, i needed some parts for the one mounted on that tow truck, bcuz yes, i still have it, but its in the middle of a restoration, and i want to also restore the bar. I'll work on a ''before'' video soon. Thanks, your channel has raised my ambition to play with some of my light bars a few points.
@SplitSecondTowing4 ай бұрын
Very nice....i was never a huge fan of the factory ''sunburst'' configuration.....imuch prefer a ''wig-wagging'' style of pattern much like you've done here.....when these bars first came out they were cutting edge, but wow do they have an amperage draw!
@SplitSecondTowing4 ай бұрын
Flashlights!! As a career tow operator/owner, flashlights are just as big a topic for myself and fellow tow ops, just like lightbars and emergency lighting. The more videos i find on your channel, the more i appreciate your channel. Keep up the good work. Do you have any other social media? I can see you being a great source for help and information in lightbar restoration and modification, something i spend a fair amount of time doing with older tow trucks and the bad habit i've had over the years picking up and restoring old lightbars.
@SplitSecondTowing4 ай бұрын
Master class right here.....
@GreeceUSA4 ай бұрын
🇺🇸🇬🇷🇺🇸🇬🇷🇬🇷🇬🇷🇺🇸🇬🇷🇺🇸🇬🇷🇺🇸🇬🇷🇺🇸🇬🇷
@SplitSecondTowing4 ай бұрын
I have one of these bars.....but i find the speaker housing hideous, would it be sacrilegious to find a way to remove it and go with all domes? Love the channel. I subbed.
@MsLightbar4 ай бұрын
Hey, I appreciate the views and subscribing. Federal Signal offered a conversion kit do do just what you are seeking. You do not need any special kit though, just 2 bulkheads (the divders between the domes) and a center dome. The speaker section has 4 bolts on the outside and then it comes rite off. It is pretty easy to snap off the bolts as they seize up. Broken bolts won't effect putting in a center dome so its not the end of the world if it happens.
@SplitSecondTowing4 ай бұрын
thanks, i'd like to do that. Do you know where i can get any of those bulkheads? I have a few of these bars that have cracked bulkheads....@@MsLightbar
@MsLightbar4 ай бұрын
I do not know of any available at the moment. They are no longer made so I recommend looking for a parts bar with them or search ebay. @@SplitSecondTowing
@SplitSecondTowing4 ай бұрын
yeah, i get it.....i watch marketplace a lot....thanks. @@MsLightbar
@tzon68024 ай бұрын
Driver in the very front car didn't need to slow down to a snails pace either
@PerryCS24 ай бұрын
you;re required by law (in Canada anyways)... to slow down a lot...
@davidb31724 ай бұрын
Rubber neckers cause accidents
@fritz_von_steiner55444 ай бұрын
Did you just say `smartphone-users-while-driving´? 🤣
@danmiller70794 ай бұрын
I am a retired School District Police Officer and when I started, two of our units had jetsonic r/b cal. spec. lightbars, two had code 3 force four LP-6000’s, and one code 3 MX-7000, lower level: four steady burn (2-red & 2 td), intersection sweep each end, single alley on each end, 2 flashing ambers to the rear plus traffic director. I have seen some of the MX-7000’s retro fitted with L.E.D.s but they were woefully dim. After replacing our fleet, we went to the Code 3 21TR. As far as voltage consumption the LEDs are great but the “movement” of the light beams with halogen or incandescent bulbs is what I considered the most attention getting. Just my thoughts.