HI, good video ! Where did you get the slide from ? any link ?
@MagicKnivesGaming2 күн бұрын
You can either get it from Redwolf or MLEMart, depending on who had is it in stock
@youneslasfarКүн бұрын
@@MagicKnivesGaming but it is more solid contruction that the original. i got an almost brand new vfc glock 18c v3, bought a few months ago and only after a few games, that bolt catch nub in the slide is worn out and won't lock back on empty anymore.
@MagicKnivesGamingКүн бұрын
@@youneslasfar unfortunately this is something that you’ll have to replace every once in awhile depending on how much you game with it and how much you use the slide release. The V3 slide is “slightly” more durable than the original/previous versions, but if you heavily use the slide release, it will wear out, and unfortunately VFC does not make a steel version of it. The quick fix is to file the edge to allow it to lock back again. However naturally overtime you will have to replace the slide regardless. So order a spare slide when it’s time to replace it 🤷🏻♂️
@youneslasfarКүн бұрын
@@MagicKnivesGaming in the 8 months since ur video, how has ur slide been holding up ?
@MagicKnivesGamingКүн бұрын
@@youneslasfar It's held up well, but then again I don't shoot this gun that much, and I try avoid using the slide release as much as possible, and resort to power stroking when I'm not in a rush to reload. I haven't gamed with airsoft in a long time, so if I was heavily gaming, it would probably require a slide change maybe once or twice a year depending. But that's a rough estimate :$
@caribbeanspikee92013 күн бұрын
I did not use my one for a few months an not it’s not coming onn .. can u help ?
@MagicKnivesGaming3 күн бұрын
@@caribbeanspikee9201 I don’t have this anymore sorry, I honestly don’t recommend this anymore and suggest getting a GSCI Gen 2+ NVG as it’s more ideal for true night vision
@kaz1a224 күн бұрын
i just bought this with a 3-9 scope because i love the r700 from cod 4
@davidaraujo9324 күн бұрын
you know if I can turn off the flash mode?
@MagicKnivesGaming24 күн бұрын
@@davidaraujo93 yes, you just have to hold the button down and you can change the settings
@davidaraujo9324 күн бұрын
really awesome, thanks for sharing w us!!! regards from brazil
@greenreaper363326 күн бұрын
I wished u talked more on parts compatibility rather than just aesthetics and outer functions of the gun🙃
@MagicKnivesGaming26 күн бұрын
I appreciate your comment, unfortunately there's certain things that I can't inform people on because unless I have more guns and parts that I can test with in the future, I can't give false information on things that I don't have hands on experience with
@Blacksmithing-687126 күн бұрын
using .25g bbs may help your hop up problem
@MagicKnivesGaming26 күн бұрын
Already fixed the hop up, I'm honestly very basic when it comes to bb weight and use just .20g cuz it's the cheapest and most straightforward, only use heavier weight bbs for guns that can't use .20g whether it's due to fixed hopup or the gun just wasn't made for .20g, guns like the TM Saiga and the KWA Mac 11, both of which I have and use .30g on
@loopys88528 күн бұрын
W GUN
@Sliperypickle000Ай бұрын
file name for shells?
@MagicKnivesGamingАй бұрын
www.thingiverse.com/thing:5368003/files
@MaxS-p7yАй бұрын
Can you make me one ? $
@MagicKnivesGamingАй бұрын
@@MaxS-p7y don’t have a 3D printer :$
@thegladiators5616Ай бұрын
Can you make a video and give all your players save file bcz I play AO tennis 2 crack version and have not community support.pls share your all players data in mediafire format so I can enjoy too.
@MWmotaАй бұрын
This is a great video! Keep them coming!
@kingswheelsandthrills8888Ай бұрын
Dlt uninstall and reinstall
@y0zukivfxАй бұрын
thx
@spectre57662 ай бұрын
What battery do you recommend running? I'm just starting out and know NOTHING lol
@MagicKnivesGaming2 ай бұрын
You can run an 11.1 lip battery with this, it has a built in mosfet so running an 11.1 will maximize its trigger response
@spectre57662 ай бұрын
@MagicKnivesGaming thanks!
@khalen-brendonguatlo37652 ай бұрын
what is 450-550 FPS test shoot mask?
@MagicKnivesGaming2 ай бұрын
kzbin.info/www/bejne/d3TSlnxrjcl0j5o
@doggiethepug2 ай бұрын
Hey, I'm buying this, the Cyma CM360LM, the metal one. I also ordered the shell holder for it's side and a sling, it will arrive in a few days, thanks for the showcase I'm super excited.
@2lbsTrigrPull2 ай бұрын
12:50 The CYMA 74 Midcap work really well in mine. I'm using LCT mid and low caps for my E&L 74 too. In my E&L AKM only LCT plastic mid and low caps work.
@MagicKnivesGaming2 ай бұрын
Yup, same story here, I realized that in order to match the look of the original mag, Arcturus AK74 mid cap was the best option
@pavinvatanavikrom20552 ай бұрын
is this a single layer lens version or a double layers lens version, is it fog up easily? and did u try the durability test, shoot it with bb in close range? thx for reply
@MagicKnivesGaming2 ай бұрын
@@pavinvatanavikrom2055 single layer, doesn’t fog up easily, and yes I’ve shot it point blank with my pistol, no issues, there’s even a few videos on YT with HPA rifle with about 2 joules shooting it point blank, no cracks of sorts
@pavinvatanavikrom20552 ай бұрын
@@MagicKnivesGaming thx for info, really appreciate
@ズーム2 ай бұрын
Do you currently still work at brinks?
@MagicKnivesGaming2 ай бұрын
@@ズーム yes
@ズーム2 ай бұрын
@@MagicKnivesGaming okay, I just got my guard card. Living in CA. Taking my firearms test in a few weeks. Seems like a cool career. 22 right now and looking to get into this type of work, so we’ll see what happens
@mav42092 ай бұрын
Do you have an airsoft shotgun? You can put a piece of tape on the door as a lock and then open it with the shotgun.
@MagicKnivesGaming2 ай бұрын
@@mav4209 that’d be a cool idea 🔥😌
@verdugo79743 ай бұрын
I have this same gun, and the stock has a little side to side play while unfolded (about 1mm of play) Do you have the same side to side play in the stock?
Do you recommend this replica currently I have an ak 12 lct
@MagicKnivesGaming3 ай бұрын
I think for what you’re getting, it’s pretty good 🔫🔥
@2lbsTrigrPull2 ай бұрын
Compared to the real deal it's still crap quality but compared to other airsofts it's better which is quite sad but that's the reality.
@MagicKnivesGaming2 ай бұрын
@@2lbsTrigrPull I’d consider E&L a middle tier, as opposed to brands ljke LCT, Arcturus
@2lbsTrigrPull2 ай бұрын
@@MagicKnivesGaming Oh... my LCT AK-74MN was worse than the E&L AK-74MN... But everyone has different experiences I guess. 😁😂 My E&L AK came already with Mosfet and tuned internals so I guess in that department it was at least as good as any other AEG with all the bells and whistles.
@MagicKnivesGaming2 ай бұрын
@@2lbsTrigrPull my lct akm didn’t have a mosfet either, even when I installed one, I had to change the motor cuz the stock one kept burning out the mosfet, now it runs super smooth, but E&L out of the box works decent, but I would still upgrade a few things off the bat. LCT has good externals, some internals should be swapped out
@StootWorts3 ай бұрын
Been having these exact issues with my EMG Pit Viper, thanks so much for the help! I'm gonna try these fixes soon.
@MagicKnivesGaming3 ай бұрын
@@StootWorts glad I could help, yeah unfortunately this is a common issue with the EMG 2011’s
@kip.airsoft3 ай бұрын
This is awesome. Appreciate the righty AND LEFTY demonstration😜🙋🏻♂️
@MagicKnivesGaming3 ай бұрын
@@kip.airsoft thanks man 👍🏻, gotta learn how to do it both ways 🔫🔥👍🏻
@ivansucic91493 ай бұрын
Crooked front sight post is a issue is there a way to fix it?
@MagicKnivesGaming3 ай бұрын
Oof, maybe just use a punch pin and a hammer to straighten it as much as possible, otherwise you can try getting another front sight post to replace it :/ 🤷🏻♂️😓
@ivansucic91493 ай бұрын
@@MagicKnivesGaming So if i punch out 2 pins on front sight post i can straighten it no problem? sorry im not a tech so this whole thing is werry new to me since im gonna do this miself
@MagicKnivesGaming3 ай бұрын
@@ivansucic9149 no, you will need to unscrew the front sight post to remove it, the side pins don’t really do much
@ivansucic91493 ай бұрын
@@MagicKnivesGaming here is what find out so far: i removed cleaning rod and looked front sight post from a bottom and there is no screw hole afther that i removed muzzle break and that is it no screw holes can you sent me a link to a detailed video on where screw are & how to remove front sight post on my e&l akm essential mosfret edition like i said im no tech guy and since my tech guy has no time to fix it im on my own :(
@MagicKnivesGaming3 ай бұрын
@@ivansucic9149 the front sight post is adjustable, you just need to unscrew it to take it out from the front sight itself. Like take a plier and just unscrew it from the top
@THEgopnik353 ай бұрын
Beauyfull,whats the name of that rail?
@MagicKnivesGaming3 ай бұрын
It’s an LCT AK railed dust cover. Although I had to modify it by putting a piece of shim underneath and have it stick out slightly at the front so it could fit and lockdown onto the gun. This just made battery installation and removal easier and also allowed me to not have to remove the rear sight which is always a huge pain in the ass to do on an AK
@THEgopnik353 ай бұрын
@@MagicKnivesGaming i mean the one with the PEQ15 and flashlight brother
@MagicKnivesGaming3 ай бұрын
@@THEgopnik35 ah my bad 😓🤦🏻♂️, it’s a tri-rail barrel mount by Tufforce: tufforce.com/special-sales/tri-rail-barrel-mount-fit-barrel-dia-13-18-mm-suit-for-ak47-usa-kr-103-vz-58-hk-sks-rifle-its-variants-rifles-tufforce-unique-design/
@THEgopnik353 ай бұрын
@@MagicKnivesGaming thanks buddy,your ak is so pretty,good job 🔥
@MagicKnivesGaming3 ай бұрын
@@THEgopnik35 Thank you man :)
@InfinityMind13 ай бұрын
Is the same true for SaberTrio heavy duty neo pixel blades?
@MagicKnivesGaming3 ай бұрын
Any neopixel blade, you are taking a risk if you start going heavy dueling…
@MagicKnivesGaming3 ай бұрын
UPDATE: I realized after the tracer unit fell off under recoil, I just had to remove the original O-ring on the muzzle adapter, and I also added some adhesive Velcro tape around the muzzle which allowed the tracer unit to fit super snug. I’ve done the same mod for the Cyma M3 spring shotgun and it works incredibly well
@Debbiebabe694 ай бұрын
Top rail - 3-9 scope. Bottom rail - M203.
@7624 ай бұрын
How did you mount it to the side of a barrel? Which mount did you use?
Yeah but it isn't the Ambassador! 😂 Yeah I'm sorry I used that joke here. 😔
@Dwayne_LaFontant5 ай бұрын
As long as you don’t put ever single fiber of your being into your swings you will probably be fine. If you’re gentle you might be fine.
@samkamyafes21395 ай бұрын
is it metal and how much kilogram?
@MagicKnivesGaming5 ай бұрын
Yes it’s metal, and it’s about 3.73 kg
@Slammedf186 ай бұрын
Hey man great video, can u lock the bolt back and use the bolt catch with this? If so how do you?
@MagicKnivesGaming6 ай бұрын
Unfortunately you cannot
@MagicKnivesGaming6 ай бұрын
UPDATE: if you fill BBs directly from the top, you will get, 31 rounds into the magazine
@Axmorn6 ай бұрын
Thank you so much for that video. Almost thought I had a faulty model.
@dadapik6 ай бұрын
You have two iron sights right and left of the central hole
@tyler17686 ай бұрын
What most do with real version is basically instinctive fire takes alot of practice and just tuck the stock or brace it hard agasnt shoulder
@MagicKnivesGaming6 ай бұрын
Makes sense, thanks for watching 😌
@daviddunca-zx5vj6 ай бұрын
I have the same but the platinium you think i can but a red dot on this?
@MagicKnivesGaming6 ай бұрын
Definitely, you just got to get the side rail adapter for it
@GeneralGiffel6 ай бұрын
Where did you order this? Every version i see uses mini tamyan and no mosfet. I am looking at one on Evike Europe.
@MagicKnivesGaming6 ай бұрын
At Gear Up airsoft
@GeneralGiffel6 ай бұрын
@@MagicKnivesGamingThank you! Great review.
@davidlanglois6776 ай бұрын
What parts can be used to upgrade the sr24?
@MagicKnivesGaming6 ай бұрын
Hopup and barrel I believe can be upgraded with TM spec parts, but that’s as much as I’m aware of
@davidlanglois6776 ай бұрын
@@MagicKnivesGaming I will rephrase my question I would like to do internal upgrades on the sr24 which part is compatible with the sr24? parts of vsr10 parts of m24? because I can't find any information on the subject
@MagicKnivesGaming6 ай бұрын
@@davidlanglois677sadly I’m not familiar enough with the platform to give you a solid answer as this is not my gun, the best I can say is you’re fortunate enough to have both guns side by side with the internals, and see which parts are compatible, as far as I can tell though, the only major difference is the type of magazines they use. I prefer the sr24 cuz you don’t have to worry about losing bbs everytime you take the magazine out
@davidlanglois6776 ай бұрын
@@MagicKnivesGaming all good raven evolution response me and its a vsr-10 tokyo marui fit for internal upgrades :)
@gregoryfranks73476 ай бұрын
that mofo makes me smile just like you. if you look at your video, your face turns to a crazy smile as soon as you reach to pick it up.LOL I have one as well and I do the same thing just thinking about it. did you know this is the only true 1:1 Mac they make. others are similiar but none is true to the original. do you have any issues with proper lubrication. they say and I have had problems with too much or not enough. the nozzle spring on mine fail and leave the nozzle unable to return all the way back. i am very lucky and have a brother who was smart enough to buy as many full auto guns before they were banned in 1986. only real steel full autos have to be registered as pre 1986. he has a Mac that we shot once and it was the coolest gun ive ever shot. better than his mp5 more fun because its so fast and spits 24" flames. this kwa feels exactly like the real one except its about 12-16 oz. lighter. the real one has so much recoil to shoot it like a pistol is difficult because it rises up so fast it very very difficult to stay on target after 5 rounds without correction you will always be above the target. this is the hands down most realistic EXPIRIENCE to using a real one. take how this feels doing a mag dump and multiply the feeling , the aggression and the joy by about 15. that's a lot but to truly understand how violent these things really were 15 times is reasonable to equate it. my kwa often doesn't empty a full mag before it runs out of gas. semi is decent for such a short barrel but it is so finicky. I have not replaced the nozzle system with upgraded parts yet so it doesn't always work after the first use once its fresh lubed and cleaned. im a kid from the 70'-80s so this has always been my favorite smg. your video was so informative with a great bit of detail because you have used enough to give a good idea of what someone should expect. I appreciate that. outstanding job. check out others if want to see the scale of other models. also Mac 10's are so different in size if your not familiar check out the difference and how awful the Mac 10 looks compared to this. again great video. thanks cheers
@MagicKnivesGaming6 ай бұрын
Glad you enjoyed my review! Yeah I realized there haven’t been a lot of reviews on this gem, so I figured I give it the proper respect it deserves. I’m almost scared to take it apart/shoot it too much cuz since there doesn’t seem to be a lot of aftermarket parts, I really don’t want to risk breaking this piece. Either way it’s a fun gun to shoot, even if it’s not the most accurate, but I’ll def try to play with this once I can get a tracer/tracer adapter for it 🔫💥☄️
@gregoryfranks73476 ай бұрын
@@MagicKnivesGaming you shouldn't be afraid to strip it down there's plenty of videos that show exactly how to how to do it and a little tips to help out as well as it should have come with a little bottle of lube use that lube and just kind of test it out starting with the small amounts just on the areas that it tells you to and if that doesn't you know keep it working good just add a little bit more the next time as long as you keep it lubed and clean it loves to shoot I wouldn't be worried about shooting it too much I'll try and look up the place where I found some aftermarket stuff for it and I'll see if I can send you a link
@gregoryfranks73476 ай бұрын
@@MagicKnivesGaming you seem to know the things that will instantly break it like leaving no room for the follower as well as making sure the bolt is open to put that mag in a lot of people forget that and they just jamming in there and Break Stuff I'm glad you think it's as cool as I do
@MagicKnivesGaming6 ай бұрын
@@gregoryfranks7347 yeah, well as long as I can follow what they said, and plus trying to keep this thing lubed without having to take it apart just seems like a huge headache 😓😓, but yeah, I hope to keep it running for as long as possible
@MagicKnivesGaming6 ай бұрын
@@gregoryfranks7347 sounds good, thanks for all ur input 👊🏻🔥👍🏻
@rogersurian45166 ай бұрын
Wow! That's great....
@Mortypants6 ай бұрын
found you
@ivanbobrov_6 ай бұрын
Great rallying and thanks for the review
@MagicKnivesGaming7 ай бұрын
IMPORTANT UPDATE: The rear sight issue has been fixed. It was mainly due to not having the proper screw to hold down the rear sight; NO MODIFICATIONS REQUIRED. The V3 Glock 18c slide requires a M2.5x12mm phillip screw. You can find some on Amazon along with the nut as mentioned in the video.
@Takedownairsoft17 ай бұрын
I had to change the battery, the red dot was immediately more visible and way better. It’s not a bad sight.
@sniper321fire5 ай бұрын
Good to know as I am getting the Umbrella corporation M4 with this red dot soon
@CouldntThinkOfNam1007 ай бұрын
have you found an iris that fits this?
@MagicKnivesGaming7 ай бұрын
I have not, mainly since I don’t use one for my unit