3:08 thank you,i hope i can do it too on my 4ft only white Christmas tree. First time have it . Last night i ended up removing the ribbons because i cant figure out how to make it look good 😅. When o ordered it online ,i already figured out in my mind its just so easy to design ,am really excited,but when it arrived and began to put the decors ,i dont know how to beutify it 😅
@nala28394 күн бұрын
Can you update on how they’ve held up!
@LovelyEtc3 күн бұрын
Overall the paint held up very well after a couple of years. The handle has a few chips which I expected and all of the paint on the inside of the bottom track has worn off. But that area isn’t very visible anyway. All of the rest of the paint still held up. We have since moved, but found this to be a very good fix for old doors!
@artslive666 күн бұрын
Nice job
@LovelyEtc3 күн бұрын
Thanks!
@CrochetDoll076 күн бұрын
Can you use these sealers with any paint or only on flat paint?
@LovelyEtc3 күн бұрын
They should work well with any paint, however, it is best to check the instructions on the type of paint you are using to make sure it is safe to use.
@redfunkyheart67676 күн бұрын
What about the inside did you leave it ?
@LovelyEtc3 күн бұрын
Yes, I did not paint the inside of the shower, just the outside.
@louislloyd12089 күн бұрын
Great job! The end result looks fantastic. I'll try this. I never even thoighnif usijg spray paint, make makes sense. 😊
@LovelyEtc3 күн бұрын
Thank you! Please let me know how your project turns out.
@juanitahardy858312 күн бұрын
Missed what you used for sealer.
@LovelyEtc3 күн бұрын
Hi. I used an Epoxy Resin topcoat. Here is my affiliate link if you want to check it out: www.amazon.com/Environmental-Technology-128-Ounce-Finish-Gallon/dp/B000LNW022/ref=as_li_ss_tl?keywords=envirotex+lite&qid=1570634007&sr=8-4&linkCode=sl1&tag=lovetc0b-20&linkId=711673e5dee69e8c77a86b0720f7720f&language=en_US
@nicolejamison93214 күн бұрын
Less talking….more demonstrating
@LovelyEtc3 күн бұрын
Sometimes it is necessary to speak through the process, but thank you for watching!
@SerendipityNJ14 күн бұрын
I will always love chippy paint too - I was kind of hoping that you would stop at the point where the different layers were being revealed - but alas - your final project turned out fantastic - great job - love the map wall too!
@LovelyEtc3 күн бұрын
Thanks so much! Yes, chippy paint will always be a favorite, but for this project, I went in a different direction and am so happy with it!
@NewCandy114 күн бұрын
Looks like you painted over the hardware, specifically the hinges, on your green secretary? I thought that was a no-no.
@LovelyEtc3 күн бұрын
Hi! I added new hardware, however the 2 small hinges on the front I did paint. I liked how it blended and focused on the hardware. It is always a matter of preference, so you can certainly refinish the hinges if you like.
@NewCandy13 күн бұрын
@@LovelyEtc -- Hmmm ... Thanks!
@pamsheets63215 күн бұрын
This is an amazing headboard! Love it! Absolutely gorgeous transformation! 😊❤
@LovelyEtc3 күн бұрын
Thanks so much! 😊 I'm really happy with the finished project!
@justjohanna715 күн бұрын
The wall is also cute!
@LovelyEtc3 күн бұрын
Thank you. It was a fun project!
@metromonthly15 күн бұрын
Great job!
@LovelyEtc3 күн бұрын
Thank you! I really enjoyed this one!
@colleenpeterson529015 күн бұрын
Great video explaining the process. Loved the completed wall!
@LovelyEtc3 күн бұрын
Glad you liked it! It adds a unique vintage feel to the space.
@aprilkerr597816 күн бұрын
That's awesome!❤
@LovelyEtc3 күн бұрын
Thank you! I was thrilled to find this and the price was amazing!
@ketoacid339316 күн бұрын
Fantastic job. I'm so envious of women who know their way around a Saw, Hammers, drills. Very impressive. My next comment is not to you per se but a general comment from someone who has a no shoes in the home policy. Having all those shoes in the master closet, doesn't it smell? Wouldn't you want this rather in a hall closet in a mud room?
@LovelyEtc3 күн бұрын
Thank you. It is so true that the more you DIY, the better you get with tools. It's been years of practice! Hmmm...we haven't had any issues with the smell. But, if you go hiking or running, maybe let the shoes air out a bit before placing them in the closet?
@suga76chale17 күн бұрын
Thanku for sharing! Very helpful ❤
@LovelyEtc3 күн бұрын
I'm so glad you found it helpful!
@patriciahastings903517 күн бұрын
Beautiful! I love it!
@LovelyEtc3 күн бұрын
Thank you so much!
@mariekadima185718 күн бұрын
I REALLY LIKE IT'S SIMPLE AND BEAUTIFUL
@LovelyEtc3 күн бұрын
Thank you! It is definitely a simple, streamlined look that I don't think I'll tire of. :)
@laurapenaranda168418 күн бұрын
That’s so beautiful ❤ 👏
@LovelyEtc3 күн бұрын
Thank you so much!
@debicrites777718 күн бұрын
It's Beautiful
@LovelyEtc3 күн бұрын
Thank you for your kind words. I really do love it!
@kengrubb18 күн бұрын
Thank you for this. I have a kid's bathroom stool with stenciled letters that were faded and chipped and I was struggling with how to preserve or restore them. I started carved and Dremeling thinking I'd fill the letters with colored epoxy. It's a beast to get clean lines. I have to hunt down some 1/2 inch and 3/8 inch stencils, tracing paper to make a guide on letter placement, them follow your method and redo the letters.
@LovelyEtc3 күн бұрын
I'm so glad you found my tutorial. Yes, it can definitely be tough get clean lines. I have been using this process for years and have been very happy with the results.
@smeg855718 күн бұрын
sorry did you have to trim the 1x2's? aren't they thicker than where your attaching them? or does it create a lip? and do you attach it to the wall at all?
@LovelyEtc3 күн бұрын
Hi. Hopefully, I am reading your question correctly. I attached a scrap 1×2 board directly to the wall to act as a support. I cut 1″x2″ boards for the trim. I do have a detailed cut list and measurements in the written post that you may find more helpful. www.lovelyetc.com/how-to-build-a-diy-closet-organizer/
@ric521018 күн бұрын
How long did this take in elapsed time? About 8 hours of work? That's my wild guess.
@LovelyEtc3 күн бұрын
It took about 4-6 hours give or take. But the final result was well worth it!
@ric52103 күн бұрын
@@LovelyEtc agree, it looks great!
@EveBrinker-qv1ki18 күн бұрын
What kind of paint do you use
@LovelyEtc3 күн бұрын
Hello! For this paint project I went with General Finishes Westminster Green, but that has been discontinued. A close match is Fusion Mineral in Pressed Fern. Here is my affiliate link if you want to check it out. www.amazon.com/Fusion-Mineral-Paint-Pressed-Fern/dp/B084CVZPHS?hvadid=416712880520&hvpos=&hvnetw=g&hvrand=14431552063120042997&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1027084&hvtargid=pla-902089184815&psc=1&mcid=fea5a7ba11be3091bd65805bc33e6823&adgrpid=93354452825&hvpone=&hvptwo=&hvadid=416712880520&hvpos=&hvnetw=g&hvrand=14431552063120042997&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1027084&hvtargid=pla-902089184815&gclid=CjwKCAjww_iwBhApEiwAuG6ccNS5DKGtN1reS20DZtiz5FOSis6EbIW2fQ2tdN6Iwfs_FkzfTOQygBoCHUkQAvD_BwE&linkCode=sl1&tag=lovetc0b-20&linkId=6934630774805030586eb149f2a2aee2&language=en_US&ref_=as_li_ss_tl
@stellamartinez714219 күн бұрын
Thank you. You are an excellent teacher.
@LovelyEtc3 күн бұрын
Thank you for your kind words! I love to hear that!!
@Purifiedinfire20 күн бұрын
It looks like yo ended up using plywood? What was the grade was it sanded on both sides? I would think that the one side of the upright supports wouldn't look as good if one side was the less preferred side no?
@LovelyEtc3 күн бұрын
Yes. I ended up using 3/4″ plywood cut into 15” strips. I painted both sides, but did not sand. I added trim to the front of the shelves to give them a more finished look. I do have more details in the written post if you want to check it out. www.lovelyetc.com/diy-closet-shelves/
@kylegreen853121 күн бұрын
I tried those foam pads and they leave behind little blue pieces in the finish.
@LovelyEtc3 күн бұрын
I wonder if you were pressing too hard when you were sanding? I have used these many times and didn't have that experience. It could also be how they were stored?
@RositaAldrich22 күн бұрын
Love... Great repurposing & making useful while still maintaining the original as best as possible!
@LovelyEtc3 күн бұрын
Absolutely! I really am happy with how it turned out. Nothing like a vintage touch for extra charm!
@mackenziemccoy58122 күн бұрын
I’ve been applying water based polyurethane to painted furniture and it is taking the paint off of the piece! I’m using valspar satin interior paint
@NewCandy114 күн бұрын
Gosh, I wonder what is going wrong. By now, I guess you've fixed the problem. Can you share with us?
@LovelyEtc3 күн бұрын
Can you please let us know if you identified the problem? I did not have this happen. Was your paint completely dry before applying the poly?
@mackenziemccoy5813 күн бұрын
@@LovelyEtc I didn’t fix the problem, I just put on another layer of paint and left it unsealed
@Jeany82923 күн бұрын
I will use this for my projects thank you 🎉🎉🎉❤
@LovelyEtc3 күн бұрын
I'm so glad you found it helpful!
@roxannmcfarland927023 күн бұрын
Thank you!!
@LovelyEtc3 күн бұрын
My pleasure!
@terrancetilghman86324 күн бұрын
Thanks
@LovelyEtc3 күн бұрын
You are welcome!
@dane303824 күн бұрын
Didn't work. I used two different cans and each came out of the can in a straight line ( not an even spread ), left a heavy residue that ruined the project and bled through. Why the video edit at the moment of truth in the video? 5:30. Something changed right at that most critical moment. Why?
@LovelyEtc3 күн бұрын
I am not sure what issue you had with this. I have used this process for many years. If you want a closer look at the step photos, please check out the written post here. www.lovelyetc.com/how-to-stencil-on-wood-with-beautiful-results-every-time/
@jenandrea678728 күн бұрын
Mines are already painted dark brown, and I want gold paint. and I think I need to sand it down because the paint is lifted . What is the process ?
@LovelyEtc3 күн бұрын
If you have paint that has lifted, you definitely want to sand it. Once you sand, you can follow the same steps for painting shown here and in the written post. www.lovelyetc.com/painting-shower-door-frame/
@LauraInglese29 күн бұрын
Hi, I watched this tutorial on painting laminate countertops and your tutorial reviewing finishes for white painted furniture. Rather than using the Envirotex sealer I am thinking about using the General Finishes High Performance in as high a gloss as possible to avoid/minimize yellowing. Are there reasons you think this would not be a good sealer for the countertops? Both videos were very informative. Thank you so much!
@LovelyEtc3 күн бұрын
I am so glad you found it helpful! I would definitely check the directions for the type of paint you are using, but I was very happy overall with the epoxy resin. I do recommend a pour on sealer. I am leary to recommend a different sealer for laminate counters unless I have actually tried it. But, I will say I have used General Finishes for furniture as you mentioned in this article. www.lovelyetc.com/best-topcoats-white-furniture/
@lindaloftus8780Ай бұрын
It looks fantastic. You did a great job. Glad to see some repurpose items. Congradulations.
@LovelyEtc3 күн бұрын
Thank you so much! I definitely enjoy repurposing furniture.
@bobstl8647Ай бұрын
I have the top of a breakfast room table I need to seal. What about GatorHide from Dixie Belle. I know it's tough to get right, but it seems like that might be the toughest finish for this high-traffic piece??? What would you recommend as the best choice? Feel free to suggest whatever you think is best. Plus, is the blue sponge still the preferred application tool? Thank you very much!
@LovelyEtc3 күн бұрын
Hi! I have an article all about the best top coats for painted furniture that should answer your questions here www.lovelyetc.com/best-top-coats-for-painted-furniture/ Also, the blue sponge is my favorite because it is super easy to use and really gives a smooth finish. Plus, it is inexpensive!
@lorrieney1346Ай бұрын
I subscribed! Thank you. You’re showing the example of what is thick vs thin was so helpful as well as tinting the poly. Plus, you’re gracious and your voice is calming. Born teacher! Grateful!
@LovelyEtc3 күн бұрын
Thank you so much for your kind words and for subscribing!
@braingil2661Ай бұрын
How much paint thinner to use if using an paint sprayer
@LovelyEtc3 күн бұрын
I haven't used paint thinner. You may need to add a bit of water to the paint if it is too thick. Here is a tutorial about painting with a paint sprayer that you may find helpful: www.lovelyetc.com/how-to-paint-wooden-chairs-the-easy-way/
@carolkarl8544Ай бұрын
This was a great informative video. Answered all my questions. Thank you so much.
@LovelyEtc3 күн бұрын
I'm so glad you found this helpful!
@Familyfun2006Ай бұрын
This is way more then 75 bucks
@LovelyEtc3 күн бұрын
I have everything broken down that confirms the cost when this was built. Unfortunately, with the increase of wood, I'm sure it has gone up at this time.
@kathyhinlicky8076Ай бұрын
Asked for the paint color but forgot to say great job with the video. Lots of good information in a succinct manner. A+
@LovelyEtc3 күн бұрын
I am glad you found the video helpful. I went with General Finishes Westminster Green, but that has been discontinued. A close match is Fusion Mineral in Pressed Fern. Here is my affiliate link if you want to check it out. www.amazon.com/Fusion-Mineral-Paint-Pressed-Fern/dp/B084CVZPHS?hvadid=416712880520&hvpos=&hvnetw=g&hvrand=14431552063120042997&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1027084&hvtargid=pla-902089184815&psc=1&mcid=fea5a7ba11be3091bd65805bc33e6823&adgrpid=93354452825&hvpone=&hvptwo=&hvadid=416712880520&hvpos=&hvnetw=g&hvrand=14431552063120042997&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1027084&hvtargid=pla-902089184815&gclid=CjwKCAjww_iwBhApEiwAuG6ccNS5DKGtN1reS20DZtiz5FOSis6EbIW2fQ2tdN6Iwfs_FkzfTOQygBoCHUkQAvD_BwE&linkCode=sl1&tag=lovetc0b-20&linkId=6934630774805030586eb149f2a2aee2&language=en_US&ref_=as_li_ss_tl
@kathyhinlicky8076Ай бұрын
I LOVE the paint color on this piece. What is it? Thanks.
@LovelyEtc3 күн бұрын
Hi. I used General Finishes Milk Paint in the color Westminster Green, however, it has been discontinued. Fusion Mineral Paint Pressed Fern is also a great option. Here is my affiliate link if you want to check it out: www.amazon.com/Fusion-Mineral-Paint-Pressed-Fern/dp/B084CVZPHS?hvadid=416712880520&hvpos=&hvnetw=g&hvrand=14431552063120042997&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1027084&hvtargid=pla-902089184815&psc=1&mcid=fea5a7ba11be3091bd65805bc33e6823&adgrpid=93354452825&hvpone=&hvptwo=&hvadid=416712880520&hvpos=&hvnetw=g&hvrand=14431552063120042997&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1027084&hvtargid=pla-902089184815&gclid=CjwKCAjww_iwBhApEiwAuG6ccNS5DKGtN1reS20DZtiz5FOSis6EbIW2fQ2tdN6Iwfs_FkzfTOQygBoCHUkQAvD_BwE&linkCode=sl1&tag=lovetc0b-20&linkId=6934630774805030586eb149f2a2aee2&language=en_US&ref_=as_li_ss_tl
@TheMusicforealАй бұрын
do you have instagram?
@LovelyEtcАй бұрын
I do but I don't really ever post there.
@missjbakuАй бұрын
Lol straight from 1990 🤣 ...I understand!
@LovelyEtc3 күн бұрын
You know it!!
@lindabarham3436Ай бұрын
Well done! Looks great!
@LovelyEtcАй бұрын
Thank you!
@lisaduitsman7701Ай бұрын
I used to love Howard’s….until I learned the proper way to clean/preserve wood. You promote Howard’s because they’re your sponsor. Along with the paint. 🤦🏻♀️ Foolish
@LovelyEtcАй бұрын
Lol, no. Howards has zero idea who I am nor does beyond paint and I don't really do sponsored content. I used Howards because in this case I didn't want to completely refinish the wood and lose the lettering on the front of the radio. restore a finish isn't right for every project, but for this one, it was just what I needed.