Kyle Shields

Пікірлер

@Rolandomoreno-n2e 8 күн бұрын

Hi here question do sale this truck

@KRShields 8 күн бұрын

Not for sale.

@CrazyForCooCooPuffs 13 күн бұрын

Before idle adjustment?

@KRShields 12 күн бұрын

Yeah. I don't recall making any idle adjustments after changing the timing

@CrazyForCooCooPuffs 12 күн бұрын

@@KRShields These engines are weird as fuck, I had an exhaust leak and my turbo sounded like a jet at the tail pipe. I fixed the leak now its quiet as fuck......the fuck? (ARP STUDS, BD 3 piece, BD exh brake, 3k springs, AFC live, bigger intercooler, 12.5 degree timing (might be lower), banks twin ram, banks cold air intake, bd steering brace, 60lb int/ex springs, fenley budget turbo 45psi, still has grid heaters)

@KRShields 12 күн бұрын

@CrazyForCooCooPuffs that kinda makes sense about the exhaust valve. Bleeding off horsetorques. That sounds like a great setup.

@CrazyForCooCooPuffs 12 күн бұрын

@@KRShields nah dude, bring the exhaust leak back, wheres my 10 blade 67 idle sound at?..............Trucks runs good, i just need a clean 1st gen to swap my p pump 12 valve into OR someone d bones me and I get a free house generator.

@OMGitsGODx 14 күн бұрын

Starts like a champ!! 💪😎

@timyanke9559 22 күн бұрын

Better batteries and a touch of throttle and that 12valve would have fired up before 1 full rotation

@kevinbacon8716 25 күн бұрын

I know a lot of people generally prefer a 12v but I think the 24v sounds better.

@KRShields 25 күн бұрын

Best part of the 12v is the mechanical p7100 injection pump. Put that on a 24v and its the best version on the B series

@TAShannon1 26 күн бұрын

Gotta love a Cummins. My ol' 12 can do this but it's more of an event.. My old 7.3 would cold start at 60*F smh

@gunnlover 26 күн бұрын

Make her run like you do bro

@Stuckin330 Ай бұрын

Idk I’d rather mix the gas and oil . I’ve had oil injection pumps go out and burn sleds up . Also you always need to keep an eye on it to make sure it’s still working . Pre mix the gas with klotz for the win

@KRShields Ай бұрын

I agree with you. After i had this installed i kept asking myself is this pump actually working. But its just what i want for this sled. Klotz all the way. I put that shit in everything. Some for the sleds a little for the mopeds even my diesels too.

@huntersharpe1700 Ай бұрын

Just looks old fluid isn’t milky or anything Dana 60s up are pretty tough

@KRShields Ай бұрын

Yeah they are.

@rickpalacios9081 Ай бұрын

What’s it worth as is?

@KRShields Ай бұрын

Good question.

@otterchaos666 Ай бұрын

Coupla dang warthogs 🥰

@curtissquires3243 Ай бұрын

I have an 87 same model just with manual transmission and 4x4

@KRShields Ай бұрын

Nothing beats manual trans.

@CharlesPester 2 ай бұрын

I have a 91 S10 standard cab...with a 2.5 liter 4 iron duke and 5 speed transmission...

@KRShields 2 ай бұрын

Manual trans is bad ass. 4x4?

@CharlesPester 2 ай бұрын

I have a 91 S10 with a 2.5 lt4 iron duke.

@monkeyass 2 ай бұрын

awesome work dude

@scrapahaulik5893 2 ай бұрын

That's cool dude haven't seen one of those

@zourdiesel8579 2 ай бұрын

0+0 =Diego 😂

@boshytf 2 ай бұрын

Amazing, i love it, it just needs a new paintjob. Are these inexpensive?

@KRShields 2 ай бұрын

Cheaper than a actual motorcycle. Easy to throw in the bed of a truck and go.

@aidshusten240 2 ай бұрын

i LOIVE THAT smol vehicles they are best trafic vehicles for low fuel economy, and you can make fuel youself

@lpKpln05 2 ай бұрын

Enough to get your feet off ground, great work.

@scrambler69-xk3kv 4 ай бұрын

I would love to know what one could expect to pay for one just like this?

@KRShields 3 ай бұрын

Go check Craigslist or fb market place.

@uPilot 4 ай бұрын

is it 2 stroke or 4 stroke?

@JonDo-1986 4 ай бұрын

50cc two stroke with oil injection. They were sold under different names worldwide like the honda rocket and honda spree. Very light scooter with a top speed of 35mph or so.

@uPilot 4 ай бұрын

@@JonDo-1986 my 4 wheeler has oil injection. Oil injection is my favorite thing and I only want to get bikes or 4 wheelers with it

@JonDo-1986 4 ай бұрын

@@uPilot Oil injection is absolutely a brilliant invention when properly maintained. Unlike mixed gas that ends up being either too rich on oil at idle and too lean at high rpm. Oil injection uses a driven gear that changes speed with rpm to give the needed amount of lubrication for the engines at different rpms.

@uPilot 4 ай бұрын

@@JonDo-1986 yeah idk how to maintain it tho I just hope it doesn't break lol

@scrambler69-xk3kv 4 ай бұрын

@@JonDo-1986 My 1982 Honda MB 5 was an oil injected 50cc with a five speed. Cost less than $700.00 new and would do 50 mph. Wish I had never sold it. Biggest regret of my life.

@DanielMangan-k6u 4 ай бұрын

I'm in the process of researching to convert this exact sled for a family member. Never done one before. Sounds like I need to find a 1982-1896 flywheel and fan housing + and extra coil? is that what you did?

@KRShields 4 ай бұрын

If i can remember i got the fan housing with the pick up and the flywheel from a 91? Safari 377. Bombardier only used the Ducati cdi ignition for a couple years. Also bought the cdi coil later on ebay. Makes for an expensive coil. No mods to the original 377 lower end.

@buddygvk5948 5 ай бұрын

What tune are you running?

@KRShields 5 ай бұрын

Custom tune with the quadzilla.

@buddygvk5948 5 ай бұрын

@@KRShields I been looking for some to mess with mind sharing lol

@KRShields 5 ай бұрын

What my tune in quad?

@floppydong 5 ай бұрын

The carburator and filter situation is awful. Exposed to rain and dirt and just will be broken if bike falls.

@KRShields 5 ай бұрын

I use this bike around the yard. Stays clean behind the leg shield. Its fallen over a few times. Foot pegs, handle bars and leg shield protect it just fine.

@palaciosfreddy9189 6 ай бұрын

Wow wow wow! Too much energy bro, bring it down a notch or two.

@KRShields 6 ай бұрын

Word I got you

@gogreen392 6 ай бұрын

I’m having a issue where my truck will crank fine and when I hit the throttle it will get stuck at 1100 rpm’s. It will do it while driving also when I let off the throttle. Ever herd of this ? Any suggestions? Thanks !

@KRShields 6 ай бұрын

What year?

@gogreen392 6 ай бұрын

@@KRShields 1999 24v

@KRShields 6 ай бұрын

@gogreen392 have to tried turning key to on position then press accelerator pedel to floor and back up. Once up turn key back off.

@gogreen392 6 ай бұрын

@@KRShields yes

@KRShields 6 ай бұрын

@@gogreen392 did you do anything with the apps? Like turing it to get a higher starting voltage? Does the engine have a miss or not firing on 1 cylinder?

@NJFordPops08005 7 ай бұрын

yes!

@brentsmith5142 8 ай бұрын

Hey, I have a '65 as well, considering doing this. Any chance I can email you some questions?

@KRShields 7 ай бұрын

You can at [email protected]. also check out minibikemike on KZbin. He has a great video series on lifan swapping a honda.

@troywright7046 8 ай бұрын

Tint windows

@KRShields 8 ай бұрын

Funny you say that. I have a tube of precut tint waiting for some free time.

@saranyukulsin1771 8 ай бұрын

Direct fit? Required any cut or drilling the hole?

@KRShields 8 ай бұрын

Their was a small amount of cut and grind on frame to get it to bolt up. Check out minibikemike channel for more indepth on the lifan swaps.

@gunnlover 9 ай бұрын

🥾🛻💨💪

@gunnlover 9 ай бұрын

Love how you make it run bro 🥾🛻💨😈😈

@KRShields 9 ай бұрын

Gotta clean out all the raw diesel fuel.

@gunnlover 9 ай бұрын

To easy no reason to make her run

@gunnlover 9 ай бұрын

make her run bro

@remypascal4248 9 ай бұрын

❤💨💨💨🤗

@gunnlover 9 ай бұрын

Make her run bro :)

@TheAlcantera 9 ай бұрын

What exhaust is that ?

@KRShields 9 ай бұрын

Im not sure. The header pipe came with the lifan engine and the muffler is for a different honda bike that i bought off ebay. I had to do minor cutting and welding to get to to mount up. The stock exhaust ran down by the brake pedel and foot peg. The lifan 125 has a bigger lower end that would not allow the use of stock exhaust