Great video! Do you happen to sell these for an 09? If so, how could we order?
@kevinnorton46208 күн бұрын
How much for the harness?
@hydroblueram8 күн бұрын
@@kevinnorton4620 depends on what wiring you need as I’ve determined some trucks actually do have more wiring than others. Could be between $75-$125.
@joshuaquitugua689719 күн бұрын
Man thanks for the info it pisses me off more that Mopar couldn’t just do this from the beginning instead of us buyers having to go out our way to get this 🤦🏻♂️ this is just like the damn cabin filter you either have to have them cut it out for you or you can do it yourself but why in the hell we have to do anything ourselves if we are paying over $30k for a brand new Truck The only two damn problems I have with RAM everything else have been great
@hydroblueram18 күн бұрын
@@joshuaquitugua6897 don’t know the rhyme or reason but mine came with the cabin air filter from the factory. I actually just changed it for the first time the other day.
@user-ru4xb3tn5i29 күн бұрын
Is this for a BSM tail lights? If not, do you have that harness? Thanks.
@hydroblueram29 күн бұрын
This is a non-BSM harness.
@user-ru4xb3tn5i29 күн бұрын
@@hydroblueram Can I get the BSM harness from you?
@hydroblueram29 күн бұрын
@@user-ru4xb3tn5i I don’t make it. Roman over on the Ram forum does though.
@user-ru4xb3tn5i29 күн бұрын
@@hydroblueram Roman Lujan?
@hydroblueram21 күн бұрын
@@user-ru4xb3tn5i Roman217
@user-ru4xb3tn5iАй бұрын
Where did you get the tail lights?
@hydroblueram29 күн бұрын
Ebay
@floridapatriotsfan9242Ай бұрын
Do you know where I can purchase the pins that you inserted in this connector? I know I need to add pin 11 that goes out to the hood latch.
@hydroblueramАй бұрын
I make wiring kits for this if you want. $40-$60 USD depending on how much wiring you need. Most trucks either have the hood latch connector but aren’t wired back to the BCM or they’re wired at the BCM but not all the way to the hood latch. Either of those scenarios would be $40.
@FrostyECGАй бұрын
Hey was wondering if with bad rf hub non push button truck the key fob unlocks and locks truck… but the truck will not start with key or remote start…
@superstud6186Ай бұрын
Do you need to update your radio to include an app for the cargo camera
@hydroblueramАй бұрын
Radio settings are listed in the video description.
@superstud6186Ай бұрын
@@hydroblueram I don't see them anywhere
@hydroblueramАй бұрын
@@superstud6186 there literally right in the description of this video. Two settings to update with alfaobd.
@GritandGrindMoneyАй бұрын
What BSM system are you using. Can you add the link to parts you're using
@hydroblueramАй бұрын
OEM Ram 5th gen HD tail lights with a custom harness I built.
@GritandGrindMoneyАй бұрын
@@hydroblueram do you have a website or do custom orders
@hydroblueramАй бұрын
@@GritandGrindMoney just do this stuff on the side so no website. I don’t offer this BSM harness though as there is already a guy over on the ramforum.com who does (Roman217). Feel free to email me if you have questions though. [email protected]
@kevindeleon26992 ай бұрын
Hey I sent you email I need the harness I’d like to purchase
@LoganDurston-ry2up2 ай бұрын
Could the amber signals be pulled from trailer wiring with a pass through and save from running wires to bcm and using alfa obd?
@LoganDurston-ry2up2 ай бұрын
How can I buy your harness?
@hydroblueram2 ай бұрын
Trailer harness still does not have a dedicated turn signal. I went this route at first but it still requires a module to break out the turn signal and another module to drop out the brake signal when the turn signal is on. I didn’t like the setup with having to use all those modules there I could accomplish better results by just running two wires.
I'm looking at upgrading the tail lights on my 2014 3500 Tradesman. Do you know if it's possible with the BCM in my truck to upgrade to the 5th gen incandescent tail lights with the amber turn signals? Basically trying to mimic the look of a 5th gen Tradesman and have the added benefit of amber turn signals. If this swap is possible, do you made/sell a harness for this upgrade?
@hydroblueram2 ай бұрын
Yes, 4th gen BCMs have the turn signal driver circuit needed to break out the turn signal and brake light. Thats how I was able to do it on my truck. I only make the harness for the 5th gen LED tail lights though, I do not make a harness for the incandescent ones.
@AKJeeper2 ай бұрын
@@hydroblueram Thanks for getting back to me so quickly! Another question, if I were to go with the 5th gen LED tail lights, would the harness you make for the blind spot monitoring work with the non-monitoring lights? Or do you have to commit to whichever variant of the LED lights right off the bat?
@hydroblueram2 ай бұрын
@@AKJeeper the harness I make is for the tail lights without blind spot monitoring.
@lvjerryvl58412 ай бұрын
Do you need the inverter for the outlet to work at all or can i just program it and it will work when the truck is on like accesory with no inverter
@hydroblueram2 ай бұрын
Plug will not work without the inverter.
@andyguerra59542 ай бұрын
Hello, thank you for publishing that video about the wiring, but I would like if you could tell me how to do that wiring step by step and what materials I need to do it. 🙏🏼🙏🏼🙏🏼
@ndenison222 ай бұрын
I have the hood latch sensor and connector and alfa obd. As far as i know i only need the pin that goes in the bcm. Do you know where or how i can buy one. Would glad buy one from you if i can get in contact with you?
@rob692 ай бұрын
Hey im late to the party but you still making harnesses?
If I am trying to pin in head rest tvs, which ones would I use for video input? 2018 ram 2500 Laramie, I was assuming pins 24-26
@hydroblueram3 ай бұрын
24, 25, and 26 are the inputs for the cargo camera.
@morrisorenshteyn43233 ай бұрын
I would love to be able to purchase those harnesses! Are you making them?
@hydroblueram3 ай бұрын
I make them on the side. Feel free to email me with any questions. [email protected]
@jazairi21321 күн бұрын
@@hydroblueramdo you still??
@hydroblueram21 күн бұрын
@@jazairi213 yeah, shoot me an email. You’ll need to send me some pics as I’ve determined that some trucks actually do have more wiring than others. [email protected]
@DrewGlobe3 ай бұрын
Can you describe how the fault sense wire works? I see that some tail lights have 3 wires while others have 4 (LED, including fault sense red wire). Thanks!
@hydroblueram3 ай бұрын
My understanding is that the fault sense signal gets pulled to ground when the LED light is turned on. If the fault sense circuit remains high or is higher than the BCM expected then the it throws a fault.
@killerjud3 ай бұрын
I finished the programing and installed 1000 ohm resistor where the latch would be and got the cancelled remote start hood open... FML. Anyone have any links or part numbers for the harness from the fuse box to inside the truck?
@Hugolopez7323 ай бұрын
Where can you buy the kit? I would need from the BCM to the fuse box
@hydroblueram3 ай бұрын
Shoot me an email. You’d be looking at $40 plus $4 for shipping if you’re in the US. [email protected]
@Hugolopez7323 ай бұрын
Where can you buy the kit?
@chrismckenna53614 ай бұрын
I need that wire harness. I can see the purple wire at pin 11 at the BCM end but it’s not terminated in the big connector under the fuse box. Sucks that ram would do all that and cut that one wire off in the harness
@hydroblueram4 ай бұрын
You mean it does terminate at the connector under the fuse box? So you just need the wiring with the hood latch connector to the connector under the fuse box? Shoot me an email, I can help you out. [email protected]
@chrismckenna53614 ай бұрын
@@hydroblueram other way around. The big fat plug has the wires for the hood latch in it but the other half of the connector does not have the wires but pin 11 at the bcm is populated. It just does not full the full way from the BCM to the plug under the fuse box. They must cut it off somewhere in the harness
@hydroblueram4 ай бұрын
@@chrismckenna5361 what year is your Ram? If it’s populated at the BCM then it should run all the way to the connector under the fuse box.
@chrismckenna53613 ай бұрын
@@hydroblueram 2017 1500 express. I’ll try to take pics of the connector under the fuse box
@hydroblueram3 ай бұрын
@@chrismckenna5361 yeah man, email me some pics. That wiring should not terminate between the BCM and the connector under the fuse box. [email protected]
@JuanRodriguez-nc7th4 ай бұрын
Matt . I upgraded the CHMSL and the new one have two camera , i am using one for the cargo camera but this my question. How can i use the other camera ? It is just a few inches beside the cargo camera
@hydroblueram4 ай бұрын
That’s a 5th gen CHMSL and the second camera is for a digital rear view mirror. I haven’t looked into what it takes to get that working on a 4th gen but I can tell you, if it’s possible, it’s going to be a lot of work.
@JmGuTe4 ай бұрын
Glad I came across your video. Just found your other video about the 4th gens incandescent, great stuff!
@ricb524 ай бұрын
So for push button start only, I would need your harness and new RF hub and Button correct? By chance where is the RF hub located?
@hydroblueram4 ай бұрын
On the rear wall. And you need a front and rear antenna and new fobs.
@robertovelasco86684 ай бұрын
Does it work if I try program a key fob that has been programmed in another vehicle?
@hydroblueram4 ай бұрын
No, those need to be cleared by a locksmith.
@robertovelasco86684 ай бұрын
How can I change my cluster to say Sport like yours
@hydroblueram4 ай бұрын
It’s a setting change in the BCM. I don’t know it off the top of my head but I’m sure if you google it someone has a video.
@robertovelasco86684 ай бұрын
@@hydroblueram Tanks man
@robertovelasco86684 ай бұрын
@@hydroblueram I’ve been looking under car configuration change but haven’t find anything to change the cluster
@robertovelasco86684 ай бұрын
Never mind, just found it
@robertovelasco86684 ай бұрын
Since I have a single cab, where do the antennas go?
@hydroblueram4 ай бұрын
In the front doors.
@hydroblueram4 ай бұрын
And back wall and under the jump seat/center console.
@waseembaig69564 ай бұрын
😊😌 0:13
@anthonymiller94504 ай бұрын
Great video and information!!! Aftermarket definitely seems like the way to go for me; especially for that power level. You can get the Plug and Play cigarette lighter style that can provide that or more power. Thanks
@jayer-su3hu4 ай бұрын
I have a 5th Gen Lone Star. No rear footwell lights and i see no harness/connectors under the seats where people say they would be if I had it. So i guess I'm running wires and tapping into the front lights.......
@CryptopsyDAMN4 ай бұрын
Which side is the ground and what runs to the bcm ?
@anthonygiocondo31864 ай бұрын
Hi I’m Interested in the harness how can I get in contact with you. Thanks
@hydroblueram4 ай бұрын
Shoot me an email. I’ll need to see what wiring you have going into the yellow connector under the passenger seat (wiring that comes up from under the carpet into the connector). [email protected]
@Cantgetusernam5 ай бұрын
Installing that new cable does not work anymore Ram stopped wiring all the extra ports on the white box so you can't plug it in to anything that works.
@hydroblueram5 ай бұрын
Says who? I haven’t heard of anyone who’s had an issue using them. Unless this is a 2024 model year change.
@Cantgetusernam5 ай бұрын
I tried to use it. I have a 2019 and its as I commented. Only two ports currently connected to truck is wired up all the rest no wires are connected to any open ports.
@hydroblueram5 ай бұрын
@@Cantgetusernam I’m not sure what you’re saying but I’ve sold cables to people with 2018-2023 4th gens as well as 2019-2023 5th gens and they haven’t had any problems. I myself have a 2019 Classic. Would be helpful if you emailed me pictures of what you are talking about. [email protected]
@BrewskyAZ5 ай бұрын
Were you using the alfaobd demo app or the purchased app? What obd reader were you using? Thanks and great video!
@hydroblueram5 ай бұрын
The demo doesn’t really let you do anything, you need the paid version. And I use the obdlink MX+ mainly but I also have a $30 scanner that works just fine as well.
@MrJoints4u5 ай бұрын
Do u also have the kit from white connector the the cab side of.the seat. ?
@hydroblueram5 ай бұрын
I can make whatever wiring you need. Just email me, [email protected]
@MrJoints4u5 ай бұрын
Got the alfa instructions available?
@hydroblueram5 ай бұрын
They’re in my other video. kzbin.info/www/bejne/fmHFfHZ3pZyGbKMsi=zPGqOJKj2obFTU3L
@Josue-rd5gt5 ай бұрын
Do you know if the gen4 Ram with the 150w inverter can swap to the 400w inverter that the gen5 Rams have?
@garyradtke32525 ай бұрын
I don't watch videos made specifically for phones viewed in the portrait position on my computer screen and I don't watch videos on my phone.
@user-zj8fe9hh3l5 ай бұрын
Just bought a 21 classic and no hood latch switch cable at all so I need the one you show in this vid. Do you have them? I have a new latch and key fobs on their way.
@user-xz3pu6pz2m5 ай бұрын
I'm interested in purchasing the wiring kit. Thanks!
@hydroblueram5 ай бұрын
I replied to your email.
@XxdaiamondxX5 ай бұрын
How i can get the antenna harness for 2017 1500 ram ? What is the part number of the harness ?
@hydroblueram5 ай бұрын
That harness is custom, Ram does not sell it. Feel free to email me, [email protected]
@kevinstill15 ай бұрын
I like those lights. They are awesome. They are in just the right spot to be able to see them. I drive a loaner car that has warning lights on the inside. They were very convenient because I noticed them easier than in the mirror.
@--emt5 ай бұрын
Why would it Ram installed this plug and not have it operational? I wanna power Mini cooler. I can't just plug it into the plug on my dash ? . I never knew that.
@hydroblueram5 ай бұрын
This video is about ADDING the outlet/inverter. If you have the outlet from factory then you already have everything installed.
@--emt5 ай бұрын
@hydroblueram ohhhh lol ok so if I plug a cooler into that plug on my dash I'm good to go do you know if it draws power or works if truck is not running ?
@hydroblueram5 ай бұрын
@@--emt you want the truck running. It will not work if the ignition is off.
@--emt5 ай бұрын
@@hydroblueram thanks bro
@Jimlogger0666 ай бұрын
Can you add sales code GXM to add a key fob my 2011 ram 3500 didn't come with one
@hydroblueram6 ай бұрын
Yes as long as you have power door locks. You just need to turn on RKE with alfaobd, program the new fobs, and then reset the win module.
@elvistrejo20026 ай бұрын
Man you sure know your stuff. Have a 2016 ram and the previous owner messed up the connection for the speakers so I’m going to redo the pins and remove the whole extra wire they put that didn’t even work.
@JuanRodriguez-nc7th6 ай бұрын
I bought the harness, and guys, that is excellent quality 👌🏻 Easy to install because he put labels in each wire. The shipping was fast, and Matt always will answer you back .
@hydroblueram6 ай бұрын
Thank you Juan, appreciate the positive feedback!
@tomduncan19706 ай бұрын
Where can I order the harnesses? I didn't see a link in the description. Thanks!
@hydroblueram6 ай бұрын
I don’t have a website yet. Feel free to email me. [email protected]
@ryanprettyman31236 ай бұрын
I have a 2019 Ram 1500 classic Regular cab, I was able to add heated and cooled seats very easily because the wiring was already there, is it possible the wiring is already there for push button, RF hub and proxy handles?
@hydroblueram6 ай бұрын
I have only ever seen two trucks that had the wiring and both were 2016 2500’s. Makes me think they ram out of harnesses when those were being assembled so they used higher trim harnesses to complete them. 99% sure you will not have the wiring.