I have a wall mounted sink. The sink feels like it will fall if I put any kind of weight to it. I have used other sinks that can hold my weight when i lean on it a bit. How to secure the wall mounted sink better?
@peterphatsima2 ай бұрын
Thanks Tommy, glad I could have an idea on how to change my storefront lock
@TommyCanFixIt2 ай бұрын
@@peterphatsima glad I could help
@ericgrand-maison15022 ай бұрын
Thanks Tommy
@TommyCanFixIt2 ай бұрын
@@ericgrand-maison1502 you are welcome
@lmyyg18973 ай бұрын
can you put a keypad entry on this type of door?
@TommyCanFixIt3 ай бұрын
@lmyyg1897 I don't think so. These type of doors are typically thik enough for that type of system. Now, someone might make a system like that for them, but I personally have not seen it.
@TheGalleria353 ай бұрын
Thanks Tommy. I just needed a look before I attempted something without doing some research.
@AokLocksmiths3 ай бұрын
Next time when you have the cylinder out of the lock, always lubricate the inside deadbolt.
@plopik74 ай бұрын
Where can I get same lock? I lost the key and can’t find one to replace it :(
@TommyCanFixIt4 ай бұрын
Check the model number of the lock, and you should find it on Amazon. If not, find I commercial windows and door wholesaler
@AmirKhan-vl9tt4 ай бұрын
Where is the best place to buy this lock?
@TommyCanFixIt4 ай бұрын
Amazon, unless your town has a store especially for these types of doors
@ArtBuddy-bf1is5 ай бұрын
Really needed this 🙏🙏🙏❤️👌
@chasecampbell90856 ай бұрын
Perfect just helped me thanks
@jtorres139416 ай бұрын
Thank you! I appreciate the video!
@TommyCanFixIt6 ай бұрын
You are welcome
@walterroach85726 ай бұрын
Great info! Just what I needed!
@TommyCanFixIt6 ай бұрын
Glad I could help
@walterroach85726 ай бұрын
@@TommyCanFixIt question for you. I need to change one out. It is currently a US Lock. Are the storefront locks universal? Can any of them be used?
@TommyCanFixIt6 ай бұрын
@walterroach8572 for the most part they can be universal. But, you need yo check to make sure the lock itself works with the current latch. Ignore not, you will have to replace everything. It's kind of the same as with storm door handles. Yes they are universal, but if a specific bran is slightly different than standard, you may have to do modifications. So just make sure that what you take put and what you put in match up. I hope that helps
@pamelaleslie45356 ай бұрын
Super helpful. Thank you
@hjmanufactory67397 ай бұрын
Really very helpful. Easy and fast
@TommyCanFixIt7 ай бұрын
Glad I could help
@smartbraininternational71387 ай бұрын
I have the same exact looking door handles on my door at my place of business. Looks like the small nuts that hold the outside handle fell off somewhere inside the door. outside door hangle fell off and I have no apparent access to the inside of the door to retrive them. Would you be able to tell or make a quick video of how to reattach the outside handle?
@TommyCanFixIt7 ай бұрын
Good question, so I dont recommend opening up the door itself. You could break the glass or warp the door.. either just replace it new, or call an actual commercial door company. It's not safe to attempt that, without experience. I wont make any video that shows anyone how to do something I don't or won't do myself. I hope this helps.. just replace new, and keep going
@ljaysperspective17757 ай бұрын
Thank you for posting and sharing this video. I much appreciated it. 👍
@MattBrooke-f3s7 ай бұрын
Tommy, why did you have to add the extra ring on it?
@foggygoggle7 ай бұрын
You forgot to clean and lube it.
@GameOver-wo8nl7 ай бұрын
Omg thanks 😅 big help
@TommyCanFixIt7 ай бұрын
No problem. I'm glad I could be of assistance. Don't forget to subscribe
@anteneh95188 ай бұрын
Thank you
@TommyCanFixIt8 ай бұрын
You are welcome
@thomastylerhuynh21718 ай бұрын
How Colman are storefronts lock? Thinking to replace it
@TommyCanFixIt8 ай бұрын
How common???
@orlandosawatzky85599 ай бұрын
Thanks
@sultandamani90699 ай бұрын
Beautiful
@daniellynn-px5tx10 ай бұрын
A pair of mole grips and done :)
@jeffaxman79910 ай бұрын
Awesome Tommy! Thanks bro!
@Tony-gr7xc10 ай бұрын
it's so helpful! thank you 👍👍
@Greenhead2410 ай бұрын
Can you reverse the the lock part and put in on the other side?
@TommyCanFixIt10 ай бұрын
I personally have not tried to do that, but as long as all the internals line up correctly i dont see why not. You will have to turn the key in the opposite direction. But it should work
@franklinmarcel143010 ай бұрын
Thank you ✊🏿💯
@JH-zr8lo10 ай бұрын
My Superintendant is replacing old wall mount sink, it has been removed which had a bracket. The new sink has curved underside, seems like it would not sit securely on a bracket. It does have 2 holes on back panel and comes with screws to go into a support wall. The wall is tiled--Is there a way to find a support beam? Or are the lag screws strong enough with drain pipe to support? The old sink was a ton, new one is 38lbs. Thanks for any advise!!
@TommyCanFixIt10 ай бұрын
Lag screws should work
@mmanning804111 ай бұрын
Can someone tell me how to remove the lock on doors without the side plate? Our church has an old-style door without a side plate. It appears that there is a hole drilled in the door itself on the outside lock cylinder, but both have recently been replaced. Thanks
@ShonBrunswick11 ай бұрын
Tom the bomb thx baby
@paulnewland6131 Жыл бұрын
Great helpful video buddy, saves alot of time. I appreciate it.
@TommyCanFixIt Жыл бұрын
Im glad my video helped.
@lesliejohnson7323 Жыл бұрын
Tommy, Good work. Commercial property manager. Very Helpful. Thanks😀
@MAXBAZZARELLI Жыл бұрын
That was awesome thank you very much I really appreciate
@tapan904 Жыл бұрын
Thanks for the video... it was helpful
@TommyCanFixIt Жыл бұрын
You are welcome.
@lyndengreaves3961 Жыл бұрын
thank you lifesaver
@cheesesteakable Жыл бұрын
You don't oil anything??????😂
@TheCardinalfan10 Жыл бұрын
What do you do when the lock works fine but won’t lock from the inside?
@TommyCanFixIt Жыл бұрын
Then either it needs adjustment, or the locking mechanism on the inside if loose or broken.
@NobleOne8 Жыл бұрын
Thank You
@brianlopez5032 Жыл бұрын
Question, how do you know what cylinder to order for replacement?
@TommyCanFixIt Жыл бұрын
There is usually a number on the lock. But most of them are universal size.
@Gatorlips2 Жыл бұрын
You're my new favorite "KZbin - HANDYMAN!" Thank you for your detailed instructions! God bless!🙏❤️🙏
@TommyCanFixIt Жыл бұрын
You are welcome. Glad i could help
@scalestommy47 Жыл бұрын
Thank you Tommy nice job I love it keep it going
@MarshallCookREG Жыл бұрын
How do you troubleshoot a key cylinder in a commercial storefront door when locked from the outside? I'm unable to unlock it from the inside thumb throw. Thank you for your help
@fastlink Жыл бұрын
What the name of the lock?
@carlosmora9617 Жыл бұрын
Hi my friend, I have an adams rite lock like this video, but the inside side has a push handle. How can I take it out?, to retire the lock?
@dustbowlrelics Жыл бұрын
?Where did you get the tumbler(key cylinder)?
@TommyCanFixIt Жыл бұрын
Amazon or if you have a commercial construction supply house in your area, you can check there too. But Amazon typically has everything you need. You can check Lowes or Home Depot. They sometimes will have what you need in some situations
@llewodcm20 Жыл бұрын
Get to the point.
@latricepatterson4504 Жыл бұрын
Omg you just saved me a lot of money 😂😂😂
@TommyCanFixIt Жыл бұрын
Well im glad i could help. That's what i made these videos for.