Hi, wanna check does your f10 523i has long crank before starting up? Example during the day
@NETTNETTCLUBVIDEOs14 сағат бұрын
@Bb3werks hi. Nope it cranks the same every time. Do check voltage of battery and starter motor just in case.
@itayah853316 күн бұрын
Throttle body f20
@NETTNETTCLUBVIDEOs15 күн бұрын
@itayah8533 hi. I think it would be similar to your model.
@nicholasdemarco311220 күн бұрын
But why remove the whole mount.... You can just leave the mount in there and just take out the sub alone
@NETTNETTCLUBVIDEOs20 күн бұрын
@@nicholasdemarco3112 it was easier for me to remove it and do the rest outside the car rather than cramping myself in a tight spot in the car. To each his own.
@vedant807623 күн бұрын
Hi, does the oil get old? My F10 has done only 20k KM in 12 years and I am not sure to do this
@NETTNETTCLUBVIDEOs23 күн бұрын
@vedant8076 hi. It depends on individual. I changed mine and nothing bad has happened. In fact, the car seems to shift and runs smoother.
@kalani19876 күн бұрын
It does not remove all of the old oil, unless a complete flush is done which I don't recommend. But, doing a drain and fill will not hurt the transmission but could actually improve the performance of it. Doing a second drain and fill after a few thousand km will help it even more. Also, you do not have to use ZF fluid. Any reputable aftermarket fluid that meets the ZF specs will work
@vcs599624 күн бұрын
I just installed a new steering wheel & coded it using BimmerCode & still not working. Any help would be appreciated
@timothyriley797428 күн бұрын
do you have to code the new injector ? Thanks
@bensaadamine4495Ай бұрын
Comment installer celui là?
@carplanet8613Ай бұрын
You are great!
@NETTNETTCLUBVIDEOsАй бұрын
@carplanet8613 thanks. Please like and subscribe for more amazing videos.
@JaysonFlores-d1pАй бұрын
on the upper radiator hose where it goes to oil cooler its leaking with the replacement hose. there is an oring there already inside and its locking just fine. There was a plastic piece in there that came off after disconnecting the connection, thought it was from older hose.
@KENJOMARISCA2 ай бұрын
Hi there, can post here how you coded the paddle shifters to work pls?
@GaLaxY-19052 ай бұрын
Some people say if you change one oxygen sensor you should change all at once, is it right?
@NETTNETTCLUBVIDEOs2 ай бұрын
@GaLaxY-1905 are those people from the parts store? Haha. I'm not sure I haven't heard that before. Car works fine till today so I guess should be fine. To each his own 👍🏼
@GaLaxY-19052 ай бұрын
@@NETTNETTCLUBVIDEOsAre the parts from aliexpress of good quality? Have you encountered any problems so far?
@natalieviviaspence2 ай бұрын
Greetings from Jamaica. I purchased a 2018 hybrid version. Excellent vehicle, excellent review. Next...how to get the Japanese audio into english😊
@user-zf6ym6jv7n2 ай бұрын
Hi, I would like to clarify a little for myself: Is the engine in this car a 6-cylinder? Is the Eisenmann exhaust system version "RACE" or "SPORT"? Did you leave the stock primary silencer on the car when installing the Eisenmann or did you remove it completely? Thanks in advance.
@NETTNETTCLUBVIDEOs2 ай бұрын
@user-zf6ym6jv7n hi. It's a 6 cylinder N52 engine. I think it's a sport version because our country has very strict laws on car modification. I changed the whole pipe altogether as seen in the video.
@user-zf6ym6jv7n2 ай бұрын
@@NETTNETTCLUBVIDEOs But at 46 and 48 seconds of the video I see the primary silencer, it's between the two pipes at the inlet and one at the outlet. It seems to me that this is left over from the stock exhaust. Could you access the plate on the Eisenmann muffler - maybe that's where the code is? Or did you sell the car? Thanks.
@sebastianm.r56442 ай бұрын
does the amplifier need to be changed? or only the speakers work and that's it
@rafh2753Ай бұрын
It will work with the stock amplifier. For best results, you will want to upgrade the amplifier but that's very expensive. For most people who listen to music, this upgrade is perfectly fine.
@SUP3RWHITE2 ай бұрын
Surprised top gear didnt make an offer.
@albertk55932 ай бұрын
Where are you located? In Malaysia? Please send contact. Thanks
@NETTNETTCLUBVIDEOs2 ай бұрын
@@albertk5593 hi! I'm based in Singapore! Greetings neighbour 😉
@albertk55932 ай бұрын
@@NETTNETTCLUBVIDEOs Thanks for responding. Good to hear from you. I am in KL. Thank you
@alessandrodelpiero43952 ай бұрын
Brother I have 528i f10, I brought this car from USA, 2 motor, 170000km , but now is 220000km, i am from Azerbaijan, Baku, everybody suggest do not change transmission oil, could you please help me?
@samirismayilov-yv7gj2 ай бұрын
salam deyislmelidi bmw suretler qutusun hazrlayan zf firmasidi o firmada suretlet qutsunun yaginin 70-80min km arlaginda deyismeyi tofsiyye edir,omurluk suretler qutsu yagina zemanet sozu sizi aldatmasin bu istehsalcinin marketinq hiylesidi burdaki omruluk eslinde istehsalcin aftomobili satarken bicdiyi zemenetli km di buda 150min km i ehate edir,
@alessandrodelpiero43952 ай бұрын
@@samirismayilov-yv7gj qardaw mesele burasindadiki ewitmemiwem gormemiwem f10da karobka yaghi deyiwen, hami deyirki awibka verecey, ne bilim problem olacagh
@samirismayilov-yv7gj2 ай бұрын
@@alessandrodelpiero4395 çünki bizdə savadlı usta yoxdu əlinə açar alan mator sökən özünə usta deyir
@0305SEA3 ай бұрын
the Compressor from you? total labour costs?
@NETTNETTCLUBVIDEOs3 ай бұрын
@0305SEA Hi. Yes, I brought my own compressor. The link to the compressor is in the description of the video. s.click.aliexpress.com/e/_DBLTpRN Labour was charged RM300. The video was done a while ago, so please check the price with the boss again. His whatsapp is in the video and overall a friendly and knowledgeable guy.
@kamalbinkadir36203 ай бұрын
Hi can we bring bottle soft drink and snacks to the cruise?
@skyliner46103 ай бұрын
I hate thios tutorial... ''conecct wires to ''THIS'' ? What the hell is this? You need to explain what you did, and explain which wires are that exactly. And i think you made it all wrong-
@pedrofly1003 ай бұрын
can i do this on a BMW E92?
@clovermiza3 ай бұрын
Would u suggest sc2 or sc3?
@NETTNETTCLUBVIDEOs3 ай бұрын
@clovermiza I would suggest sc2. It's really good. I did not try the sc3 before so I wouldn't comment on that.
@mynameiskimkongsdailylife7523 ай бұрын
Hi. How do I remove the small clamp?
@NETTNETTCLUBVIDEOs3 ай бұрын
Hi. I cut it open around 2:45 and replaced it with a universal clamp around 4:55.
@s14ak593 ай бұрын
Poor tutorial, no talking, what is point of music playing in background, you need to talk through the steps of what you are doing. Which plug from wiring harness fits where . Without talking you are not helping anybody. Also you did not explain how you did the Coding from your laptop. Which website you used. Its not good.
@B33ond3 ай бұрын
This or Toyota sienta hybrid ?
@B33ond3 ай бұрын
This have DSG. Not reliable right?
@slowjamexperience.13523 ай бұрын
Hi, did you apply any silicone between the valve cover and engine to help with sealing or you placed the valve cover directly on the engine?
@NETTNETTCLUBVIDEOs3 ай бұрын
@slowjamexperience.1352 hi. No I didn't use any silicone.
@rarelycommentsbutinthethread3 ай бұрын
Does this unit replace the OEM amp for your vehicle? Thank you.
@bindermahal38553 ай бұрын
i never change transmission oil.bmw 520d m sport 2013.miles123000,no problem so far
@NETTNETTCLUBVIDEOs3 ай бұрын
@bindermahal3855 to each his own. Some people believe in it, and some don't. Hope your car runs well and stays problem free 💪🏼
@willba44 ай бұрын
have you measured the maximum voltage output at the speakers before it clips? would be interesting to know how much clean power it puts out!
@NETTNETTCLUBVIDEOs4 ай бұрын
@willba4 no I have not. Yeah it would have been interesting.
@willba44 ай бұрын
@NETTNETTCLUBVIDEOs if you still have it, you should measure it one day! :)
@expic39544 ай бұрын
1. Try leave early to beat the queue 2. Order tickets on Klook for quicker lines. 3. Crystal Cabin has a much longer line than Standard.
@richcaponerovgang71634 ай бұрын
Which model is this
@NETTNETTCLUBVIDEOs4 ай бұрын
@@richcaponerovgang7163 523i N52 engine
@BibleResearchTools4 ай бұрын
Thank you! I have a 12-year-old N52. Your video is exactly what I needed to see! Dan
@NETTNETTCLUBVIDEOs4 ай бұрын
@BibleResearchTools you're welcome. Thanks Dan!
@abdulh96874 ай бұрын
Hi, can you clarify how you made it work when you have no pins on the plug for paddle shifters?
@randomrandomizer4 ай бұрын
thanks for this wonderful video. I feel confident enough to do it now (parts are about $15 now in 2024) but I wanted to ask you, how do you stop the water from creeping between the rubber and windscreen? is there double sided tape or do you need to silicone it to the glass?
@NETTNETTCLUBVIDEOs4 ай бұрын
@randomrandomizer I didn't do anything. So far no problems 😊
@ananthupadhyayan14 ай бұрын
Same as above comment, how do you remove the main board? Getting stuck on white dails
@allnicegrahamkomlaagbesi49125 ай бұрын
Any video on the changing of the car dashboard and the stereo system? i mean for the same car. Thanks
@hightimes53095 ай бұрын
No
@TMCHL5 ай бұрын
So No Pink Noise , No RTA mic?
@younanmoawed5 ай бұрын
Do i have to do all of this if im simply replacing the blown out speaker ?
@julesvanderferm45564 ай бұрын
No blown ones you can just plug out
@seanaguila12725 ай бұрын
Hi, how I remove the main board, it’s getting stuck on the bottom looks like is in the small dials. Any help I’ll appreciate. Thanks
@dominiccouret27625 ай бұрын
Is there a new link for the MAF sensor
@shieldjanet50336 ай бұрын
Seems good. Well background music is too loud 😮
@NETTNETTCLUBVIDEOs6 ай бұрын
@shieldjanet5033 thanks Janet! Will take note of it. 👍🏼
@ngchongsin20096 ай бұрын
i recently drive a 2017 shuttle hybrid, where is on eco and the round light is constantly on green (fuel efficiency), where it only hit 90km for 5litre. hence is only like 1L for 18km, which is very low compared to the official site of 34km. Any tips for myself?
@calebwany84224 ай бұрын
34km is probably from factory, with everything new in the car so the gold standard, you likely won't get that in real life esp as the car ages
@ngchongsin20096 ай бұрын
Is there any real difference in term of petrol consumption for a 2016 vs a 2023 shuttle?
@smartcopper6 ай бұрын
Why not choose NGK
@wonghoiyee57496 ай бұрын
As SG passport holder. Any arrival card /incoming passenger card need to be filled in? Thanks
@NETTNETTCLUBVIDEOs6 ай бұрын
Hi! I vaguely remember filling up the arrival card at the Vietnam immigration queue.
@wonghoiyee57496 ай бұрын
@@NETTNETTCLUBVIDEOs Thanks.
@AlexOus6 ай бұрын
Thanks for your efforts buddy
@NETTNETTCLUBVIDEOs6 ай бұрын
Thanks! Please like and subscribe for more amazing videos.
@waikiki69696 ай бұрын
What’s the price of the injectors? Can try fuel cleaner products first before deciding if u need to swap out the injectors.
@johnnypolex4 ай бұрын
So i used 2 tanks of Lucas injector cleaner (+ upper cyl lubricant) on 2 of our N52 cars. And both started to have leaking injectors the same week lol. They were just fine before i did it. Thought i was helping but ended up hurting it
@asencyel7 ай бұрын
The problem here and in all other applications on youtube in general, professional hvac cleaning and filtration companies do research and testing on how to maximize cleanining efficiency (thus efficiency rate of heat displacement per consumed kwh electricity) for very small orifice (perforated gaps) inside evoporater coils. what they found out now applied on some innovative solutions getting picked up in the market is you do need adequate possitive pressure to reach the inner depths of coils with a detergent! spraying the inlet side surface does not cut it! Building rooftop evaporators can be in almost 1 meter in depth and foaming the inlet side surface does not penetrate into the assembly at all. next time you spray the foam, dont let it wash away with gravity along side the inlet side surface to the drain hose, immediately run the blower fan at maximum capacity and let the expanding foam sink deep inside the evaporator. What ever that does not get into the evaporator drains right out of the tube to the ground without a chance to dissolve any particles inside the coil and the meldew/pollen particles remains deep inside the coil. Thanks for the video btw, cheers.
@NETTNETTCLUBVIDEOs2 ай бұрын
@@asencyel thanks for the advice. Will improvise. 👍🏼