the valve is not in the center of the logo, sorry bro you have to do it again!
@HHHSykes24 күн бұрын
"install the second bead on the rim" lol
@HHHSykes24 күн бұрын
Impossible installation...
@SilverShamrock71Ай бұрын
You guys could've got the Graphene 2.0 logos to match, not sure my OCD could handle that!!
@andreabrunori6127Ай бұрын
C'è un po di mady in italy in Mathiu😉
@liquidSpinАй бұрын
Can I sue for false advertising? Haha "Easy to install" my ass
@evgeniyp1976Ай бұрын
It looks like wheels are just disposables... i cant see me scratching rims like that.... patience and solvent :)
@joepjazzАй бұрын
I have a problem with this airliner...they fit too deep into the rim (Roval SL Control) so that the tire has no support on the airliner...?
@joepjazzАй бұрын
I have a problem with this airliner...they fit too deep into the rim (Roval SL Control) so that the tire has no support on the airliner...?
@joepjazzАй бұрын
I bought them but they don't fit my Roval SL wheels because the rim is too deep to support a flat tire!
@graylobo1332 ай бұрын
3:40 yes thats what i am hopping for life....
@VolodyaSenkiv3 ай бұрын
etrto 622x17 will do 45mm?
@evanm.23003 ай бұрын
I just bought these new wider ones and gona instal them now 🤞hopefully its easy. Now please update the older gravel small width inserts to be 1 piece water sealed foam just like these. I kept having them expand in size and needing to trim 3 times and then learning that it need to be lathered in sealant to not dry and expand.
@andreyrozodominguez80503 ай бұрын
😍😍😍😍😍😍😍😍😍😍😍😍😍
@mrbigolnuts30413 ай бұрын
Should I go for the Downhill airliner or the Enduro? I'm doing both on a hardtail
@flybyguy14503 ай бұрын
Currently on the barzo/mezcal combo for my xc hardtail, but want a bit more grip for my local sandy/loose gravel trails. Would the agarro front and rear be a good setup for increased grip over my current tires while maintaining a relatively efficient high speed ride? I ride the roads to my trails and dont want something crazy aggressive.
@loolyou3 ай бұрын
Does anyone know anything about the Vittoria Alway G2.0??
@loolyou3 ай бұрын
Does anyone know anything about the Vittoria Alway G2.0?? Why no one is reviewing it and no one talks about it????
@RoughWalkers3 ай бұрын
Seems like you never reply to your fan base.... il stick with slime
@geraldbmullen43864 ай бұрын
Mine went in fine. The Prob I have is air leaking from the valves.
@SirNickettyNox4 ай бұрын
Did my first time effort of gluing tubulars to my front and rear wheels using Mastic Pro. Only required one coat of glue to the rim and one to the tyre base tape, which is different to what others seem to do. It went reasonably well except for the glue getting onto the rim side walls and breaking surfaces. Contrary to what the instructions say its impossible to wash off the glue with water, did the best I could but it looks messy. Didn't like the applicator tubes, next time I'll buy a tub of glue instead. All in all I'm quite happy with my effort, can't wait to try them out in a couple of days. Hopefully the tubulars will stay on! :))
@wavedave95034 ай бұрын
Good product👍
@tomrobinson78795 ай бұрын
Go to tyre
@gerade-aus5 ай бұрын
Oh no! You mean the pros use sewups instead of those ridiculously messy tubeless tires?
@pureentertainmentsoundsystem5 ай бұрын
Great advertisement, even greater tyres.
@stelio905 ай бұрын
Vs. Vittoria Corsa Speed G 2.0 ?
@TESTA-CC5 ай бұрын
Can you please tell me the Difference between the Vittoria Rally & Vittoria Strada Tubular Tyres Please.
@slacksci6 ай бұрын
Thanks for the video. Does the enduro insert include a compatible stem? Thanks
@nikolaiorlow65824 ай бұрын
Yes it includes a compatible stem
@mtb276 ай бұрын
come caspita si fa a rimuovere ???
@sebastianh.1777 ай бұрын
Installation time on Syntace W33 rim with Maxxis Rekon was 5min - without the need of a compressor. I would say it was easier than without the airliner.
@MdBoj-n2v7 ай бұрын
Is it easy to dismantle it again?
@mir_kaz7 ай бұрын
Can they be used for a e-scooter with 10" tubeless wheels?
@lllengl.96607 ай бұрын
Until now I got the tires, until now I have punctures.
@jarnoronkainen758 ай бұрын
video name 'puncture resistance test' but.. you forgot to test? how informative ^_^ as what it comes to web links... links turn to 404 'not found' but video still remain ^_^
@arvidtynelius38968 ай бұрын
Feels like cheating, skipping all the difficult parts of applying the insert
@alexanderkohler49038 ай бұрын
😂😂😂😂😂 fuck Off i Ride 20years MTB and i am working in IT 2 hours. 👎
@CharlieChadwick-zo6iv8 ай бұрын
It does not for shit go on easily. Every trick in the book and still 100x harder than nukeproof. Luck of the draw on rim/tire combo. This is misleading for sure. Having said that, it's worth the trouble and once you have straps and good plastic leavers its ok. I also cooled the rim and heated the tire, applied grease to tire bead. I need wood clamps to get the compression to remove the tire.
@denisotl8 ай бұрын
Very easy to install, maybe 1-2 minutes extra time comparing with normal tyre instalation ...
@trentvlak9 ай бұрын
Cute video but I've been installing Airliner and Airliner XC with just my fingers and one tire lever with no problems. Really good insert engineering, probably why they're more expensive than a tire per wheel.
@MarcCianfrone9 ай бұрын
Sooo....where is the easy installation part of the video?!
@jmguevarra75779 ай бұрын
It says Vittoria tire size 2.35, but when measuring with a caliper 2.25?
@hendrixinfinity39926 ай бұрын
Depends on your internal rim width. Every tyre size has a "preferred" rim width which is usually around half the tyre stated size. It's also not actually in inches, it's a standardised iso. So 2.35x27.5 is 57-584 with 57 being the tyre width in mm (2.24inches), and 584 (22.9 inches) being the wheel diameter in mm. 27.5 is not a real size but is closest to the wheel+2.6 tyre. I currently have super wide rims with regular 2.35 mezcals and they measure close to 2.5
@Alessio1989EI9 ай бұрын
Ciao, io ho una MTB con pneumatici da 29" con canale da 25mm però da 2,5". Leggevo che questo inserto è adatto da 2,1" a 2,4". Quindi non posso montarlo?
@keepitreal15479 ай бұрын
As a former team mechanic & professional mechanic for 35 years i'm shocked that Vittoria feel this very poor mechanic is a good source to make such content. I can assure you this was poor. Many of todays younger mechanics are, compared to real mechanics of the past.
@daness409 ай бұрын
Literally look identical to the standard cream side wall lol
@godismeme2729 ай бұрын
1:22 🤤
@garysbraccia49809 ай бұрын
what about the desert around Las Vegas?? would these work well??
@hendrixinfinity39926 ай бұрын
You need super wide tyres with knobs. It really doesn't matter too much which you go for just go for the biggest your tyre can handle. This combo would work, I probably wouldn't go for anything lighter.
@dougieloughridge9 ай бұрын
Aye, no bother. This is brutal to install
@zygmuntthecacaokakistocrat65899 ай бұрын
The need to use these pliers is 1 step away from an admission of failure in tyre &/or rim design. I have a pair of the same thing by Cyclus and only when the tyre is a stupidly tight fit on the rim do I get these out of the drawer. It should not be admitted as a normal part of tyre fitting. Perhaps tyre liners are a stupid idea anyway. Especially for road bikes.