Hay,

So did it work?

Everything worked as described in the video except ability to test the device before mounting. Mine would not adjust in increments when clicking through the temp dial. But I mounted it anyway and it actually worked. It is a squeeze to get up in there and replace. Using a 5.5mm socket or 1/4" socket works to get the three mounting screws out if you have difficulty with philips screwdriver. The lower drivers plastic is easy to remove. Thank you for the video!

That's why I would never buy electric I got a 2008 E-Z-Go RXV gas I have no problem with that

Hi, Howz your cart now, has this fixed the problem once and for all. Curious to know

So if the brake is bad/ failing it will just start locking up? I hate to wire it directly and remove the ability to remove the run plug to prevent moving it just needs a new brake. Would a new run plug do anything?

was having brake issues with our 2013 rxv tried your fix and it worked just great. thanks for the video

This man sounds like Dave ghrol

Is this still working today? My cart runs for about 50 ft and then stops. I release pedal and then push it and it goes another 10 ft and then I start smelling a burning smell. Do you think I should replace with new brake or just do the jumper. Will by passing the jumper now fix what I am currently experiencing or could the brake now be fried and must be replaced.

I drive a little and then it stops. I release pedal and I can go about 20ft and does it again and I smell something burning. Is this the fix to try?

Nothing like making a video right next to a running lawnmower !!

How the hell are you able to reach those modules? I cannot , for the life of me... and dealer told me $600 in labor, even if i bring my own parts.

This video just saved me so much heartache. Thank you

So grateful for this video. Solved a mystery. Best wishes from Georgia!

Hola gente muy buen video, consulta tengo el ezgo rxv que para remolcar se saca manual alguien me puede oroentar em el desarme gracias

that is a really well designed brake, if the windings have an issue you can just replace the windings as a unit, I wish mobility scooters did that!

thanks for the video. I know this is old, but do you know what the two unused wires are for in the area of your plug?

I've changed both actuators, the ac is turning cold but where it's blowing won't work. I've changed both the actuators already and still nothing

Perfect solution totally fixed my problem Thanks!!!!

How about a switch as a security/kill switch instead of hard wire? Thanks for the video.

❤

Any updates? Cart still running? I did this a few months ago when I was replacing the brake for the 2nd or 3rd time. Now I'm having brake issues again.

Thanks for posting. I got fan control to work by the recalibration, but gave up on replacing the heater regulator. To hard to get underneath there for a 75 year solstice owner. God bless anyone who can get in there and replace the stepper switch.

Thank you great video

Dude, you rock!!! This solved my problem in about 3 minutes. 2013 RXV. I didn't cut the wires. I just took two 3" pieces of 14 gauge (white) romex white wire and created my own makeshift jumper to get it going. Totally awesome. Thanks for the research and video!

7:48 Calibration process 👍🏻

Does anyone know the part number?

you familiar with replacement wheels for acordians? Wheels broken 9n 2 story home accordion shutters and they're off track sigh 😔

Hey there. We have one of these that burns up the brake every 2 to 3 months, i have bypassed the connector and they dont get wet very often if once or twice a year. and it keeps happening. Has anyone been able to figure out what the actual source of this problem? Seems like all these ezgo carts are doing it.

I had all of the symptoms you described including the cart stopping dead in its tracks and this fixed it perfectly. Thanks a million.

My wiring is different colors. I have a 2013 RXV. The green jumper would be 2 red wires and the red jumper would be a black and black with white tracer. I'm assuming it's the same concept and the colors don't matter. What are your thoughts?

hey guys. Anyone here know a guy that has one of the Danaher handsets that would be willing to shoot me the wiring diagram at the serial port plug at the base of the handset? My girls yanked my wires out...

Thank you sir. I had the same issue with no idea on how to fix it. Removed the connector and plugged it back in and then it worked again

Thanks for the tip! I had a different issue but addressing this plug did resolve my problem.

Its been 2 yrs , did this fix work , a new plug is $10 bucks would that work

So, the entire assembly must be changed? There is no rebuild kit?

Checking in with you 2 years later - still no problems?

Thank you! Mine had the same issue. I ended up just doing the reset steps alone and it fixed the issue.

Reprogamming the control fixes this issue. A lot of times you can reuse the old brake, if you haven't trashed the brake out. Once you start having brake issues, get it to a dealer quick. Its a cheap reprogram, and you can continue to use your old brake. (You can remove the brake, then also make a simple tow rig for the front of the cart, for your vehicle, to get it to a dealer)

I like your style and great videos!!!!

Did the drain holes help?

Got EZ Go RXV 2018 and I’m having trouble with power brake. Last 30 carts I have, those connections

This is my issue for sure !

That’s my issue! Help

Well after much research because my brakes locked up I came across this video. I found the plug just like in this video and unplugged it. I didn’t cut it out just yet all I did was insert a small screwdriver into the pins slot so that they would expand and make better contact. I also put the cart in neutral and tow and it moved well. Brakes are no longer locked up and no more burning smell but still am amazed at why they would wire a circuit with this jumper. Great job to you for finding this and letting us know. Not to confident that the screwdriver trick will last long so I may be soldering soon. Thanks again for posting this

Good video thanks man👌👌👏👏👏👏🙏👍👍👍👍👍👍

Bro!!!! This fixed my cart!!!! You da man!!! I can't even tell you how many other things I've tried - so happy I found this video!!! Thank you!!!!

Where is the part where you explain what to do? Video is cut off or something?

Hey Great video, do this fix the break problem for Good? Thanks!

I just bought an old one of these and I cleaned mine up and it’s been running like a champ now. Saved $200 just by knowing how stuff works and not just part swapping. Great video