THANK YOU DEAR GOD OMG MY ASS AND MY BACK WAS BURNING WHILE DRIVING 3 HOURS OOOH GODDDD!!!!!
@rath3r420Күн бұрын
Thank you so much w vido
@HOWTODO0828Күн бұрын
Most welcome🙏
@HizTor2 күн бұрын
Front lip/splitter, where i can get one like this?
@HOWTODO08282 күн бұрын
I bought it from internet în my country. You will find it also on Amazon, ebay and other China websites🙏
@JMwraps2 күн бұрын
Every other guy didnt do it right. Finally!! Thank you, man!!!
@HOWTODO08282 күн бұрын
Glad I could help!🙏
@nedzadridjic7895 күн бұрын
Good job well done 👍👍
@HOWTODO08285 күн бұрын
Thank you! Cheers!🙏
@michelprovencher92135 күн бұрын
good info for remove handle but not for fix it back! better with: kzbin.info/www/bejne/gIbLdqWDf9R9fas
@BionicRusty6 күн бұрын
Awesome video. 👍 Thank you for sharing 😊🙏
@HOWTODO08285 күн бұрын
Thanks for visiting🙏
@leongloddek48206 күн бұрын
Hi where die you by the fenders? Did you have link
@leongloddek48206 күн бұрын
Because I’m searching an fender in L041
@HOWTODO08285 күн бұрын
Hello sir. I have no link. I bought them from Poland and I had a buddy with relations there. 🙏
@HOWTODO08285 күн бұрын
I also have my black passat with this color code. L041. Best color 🙏😎
@leongloddek48205 күн бұрын
@@HOWTODO0828 Okay, it's a shame I'm looking for two new fenders and my cheapest option at the moment would be €130 each. to order painted ones via Amazon but these are in the paint LC9X and not in LO41 and I don't want them to look different so I thought you knew someone who might sell them in that color but if it's just a friend of yours that's fine It's probably not the case that he sells them to everyone.
@leongloddek48205 күн бұрын
@@HOWTODO0828yes 🤝🏻
@dinoferrara75366 күн бұрын
Non si capisce niente E si vede poco.negativo
@HOWTODO08286 күн бұрын
Sorry to hear this. :(
@kmatlaker6 күн бұрын
Good video. Thank you. A one second spray of brake cleaner on each plug at the start will help prevent debris from getting in and clean out the mating area of the hex, making it easier to insert. Also we are told to put teflon thread tape on the drain plug thread before re-installing - Keep the W212 videos coming!
@HOWTODO08286 күн бұрын
Thank you for supporting me and my channell and for your feedback 🙏
@riiyik6 күн бұрын
Thanks
@HOWTODO08286 күн бұрын
Welcome🙏
@surasaky52856 күн бұрын
Very useful and thanks / Sak from Thailand
@HOWTODO08286 күн бұрын
You're welcome 🙏
@ckscks22727 күн бұрын
cool
@HOWTODO08287 күн бұрын
Thanks 🙏
@willysir88367 күн бұрын
according to your experience, do you recommand to change the spring also ? I mean, with the age and miles, does it get shorter anytime ? I speak for every car
@HOWTODO08287 күн бұрын
Yes. For my cars in special I always replace most of the parts when I'm working. The springs it's a must with the shock absorber. For example if you only replace the shock and let the spring in the nearest future the spring can break and you have to work again there you have to pay the labor 2 x times then normal. And so on.
@willysir88367 күн бұрын
@@HOWTODO0828 it did not think about that possibility. I’ll change it now for my next cars.
@HOWTODO08285 күн бұрын
🙏Good luck sir
@-ssch10 күн бұрын
Would you be able to do a coolant flush and adding new coolant to Passat. No full video on KZbin yet and will help. Thx 🙏
@HOWTODO082810 күн бұрын
Yes. I will do one soon. The winter it's coming💪
@-ssch10 күн бұрын
@@HOWTODO0828 thx
@-ssch10 күн бұрын
Very detailed for a beginner…❤
@HOWTODO082810 күн бұрын
Glad it was helpful!🙏
@scorpionyad11 күн бұрын
Не потрібно там знімати бампер.
@HOWTODO082810 күн бұрын
Thank you for feedback
@rowenramnath201611 күн бұрын
I was replacing my two front shocks. The worker almost gave me the rear ones. Almost took the wrong new ones 😮
@HOWTODO082810 күн бұрын
Ok
@FP-fb6jk11 күн бұрын
You are filling to much oil. There is a special tool available for measuring the correct amount of oil. To much oil = destruction of the gearbox.
@HOWTODO082811 күн бұрын
You are talking bullshit.....
@labemolon573911 күн бұрын
I’m stuck. 2023 model. I did everything in the video but it seems like something is still holding the bumper firmly under or near the headlights. Maybe newer models have another screw? Any suggestions?
@labemolon573911 күн бұрын
Figured it out. On the 2023+ models the front left and front right are secured by 4 more hex bolts as well as 4 very tight clips that secure the radar harness, this will hold the entire bumper tight and the harness needs to be disconnected from the bumper in order to pull the bumper off. To access the 4 new bolts (two on each side) you need to either have a very short thin ratchet or star driver or have the wheels fully turned to each direction. This allows you to reach deep into the wheel well to remove those bolts. Very difficult 🤦🏻♂️ and had me wondering whether it was even worth it or not 😔
@HOWTODO082810 күн бұрын
Thank you for supporting me and my channell and for your feedback about this Job. Good luck mate🙏
@HOWTODO082810 күн бұрын
💪
@bofasofa939911 күн бұрын
Important point to remember: The torque spec for the nut on the ball-joint end of the outer tie rod is 50nm + 90 degrees after.
@HOWTODO082811 күн бұрын
Thank you for feedback 🙏
@sebastienpart48911 күн бұрын
Thank you a lot for this very instructive & precise video, not too much blah blah, just what we need to service our van. Really hard to find infos on w447 services & maintenance, maybe too young so once again thank you for that! 🙏🏻 EDIT: my local parts retailer gave me 0w20 oil strictly following mercedes specs, I have a 2023 2.2 190 4x4 vito maybe the specs are a little bit different from yours but people just take care with manufacturer specs ;)
@HOWTODO082811 күн бұрын
Glad it was helpful!🙏Don't forget to subscribe to my channel for more informative videos
@KwameBamforo11 күн бұрын
It's been so informative and shown.
@HOWTODO082811 күн бұрын
You're welcome my friend 🙏
@27jezus12 күн бұрын
Hi, This is a water pump for all vw models. But this pump is NOT the Webasto water circulation pump right? Subscribed
@HOWTODO082812 күн бұрын
Yes. This it's the auxiliary water pump. Not webasto it have nothing to do with webasto.
@27jezus11 күн бұрын
@@HOWTODO0828 so my Octavia has two electrical water pumps thats what I thought. One for webasto system, and one for coling system. Thank you
@HOWTODO082810 күн бұрын
You're welcome 🙏
@DarbasFattah12 күн бұрын
Nice job thanks so much
@HOWTODO082812 күн бұрын
No problem💪
@N.E.ACMG4712 күн бұрын
Thanks !!
@HOWTODO082812 күн бұрын
You're welcome!
@Zoli-h9c13 күн бұрын
My problem is I replaced the pump, and I still have error for circulation pump short circuit 😢
@HOWTODO082813 күн бұрын
I already explained in the video. You didn't bought a good one. It's eighter the original pump or a pierburg one. Anything beside those won't work and you'll still have the error.
@Zoli-h9c13 күн бұрын
@@HOWTODO0828 that is strange. Why an aftermarket would not work? It doesn't make sense
@HOWTODO082813 күн бұрын
It does make send may friend. Always install oem parts. Yes they are verry expensive but make the difference in how long the part will last and how well will respond to any function. If you install an aftermarket one the reading Wil not me the same. The values will be different because of the low cost build etc.
@Zoli-h9c13 күн бұрын
@@HOWTODO0828 thanks a lot my friend for the info. I will try to fix the old pump or will buy a Bosch or Pierburg. Thank you
@HOWTODO082813 күн бұрын
Buy pierburg. Good luck 🙏
@arbnorvenom96313 күн бұрын
So i just pull?
@HOWTODO082813 күн бұрын
Yes. Follow my advices from the video.
@Nathan-mo9tn13 күн бұрын
How did it go? I got this todo🤦🏻♂️
@arbnorvenom96313 күн бұрын
@@Nathan-mo9tn fu*king hell i quit trying, i will try tomorrow ( two snapped wires )
@Nathan-mo9tn13 күн бұрын
@@arbnorvenom963 no way! 🥲 ffs
@TheSveinOlav14 күн бұрын
Hello, and thank you for the great video. Can i ask, is it possible to do this job with the car in a normal garage, or do i need the canal/well to have enough space to get under the car?
@HOWTODO082813 күн бұрын
You can do it even în the parking lot. You just need a good jack and something to support the weight of the vehicle and that's it. Just follow my steps and you will be able to do it very easy. Good luck 🙏💪
@TheSveinOlav13 күн бұрын
Can i ask another newbie question? How to jack the car up, and then place jackstands? The car have only one jack point on each side, and when i’ve jacked it up, there is no space for the jackstand, as the jack is taking up the point :p
@HOWTODO082813 күн бұрын
Good question. I always lift it from the nearest point to the jack point. And the. I have enough space to pus my jack right on the jack point made for this. In some cases you can bend some metal parts from underneath the car or you could brake the plastics from underneath due to heavy weight of the car. That's the risk of doing it yourself. Just be careful.
@TheSveinOlav13 күн бұрын
Thanx! Yes, last time i jacked it up on stands i put the jack as close to the jack point as i could. It did some damage to the dust cover and the metal seam underneath. I just hope this wont induce rust problems or hurt the canals.
@HOWTODO08288 күн бұрын
You'll be fine sir.
@PeterOZ6116 күн бұрын
should also clean the MAF sensor with some MAF spray. Where is the MAP sensor located on these?
@HOWTODO082816 күн бұрын
Right next to the air filter. Mounted over the big hose.
@ivantonev104416 күн бұрын
what is the size of the sockets that you using fella ?
@HOWTODO082816 күн бұрын
32 or 36 mm mate.
@ivantonev104416 күн бұрын
@@HOWTODO0828 cheers
@kennethpeek247416 күн бұрын
Also chcck the plastic cogs underneath the plastic cover. ! Its a common fail.
@HOWTODO082816 күн бұрын
Yes sir🙏thank you for feedback
@alingabriel522017 күн бұрын
Hello! Do u solve with ABS error after changing the alternator?
@HOWTODO082817 күн бұрын
Yes. I solved it on this car. I replaced it with a used alternator and the abs lights disappeared.
@alingabriel522016 күн бұрын
@@HOWTODO0828 Thanks for your answer🙏
@HOWTODO082814 күн бұрын
💪💪
@pablocarussi925218 күн бұрын
Excuse me...do you remember if it would be possible to remove the black lower plastic deflector that comes with the bumper (it is the one with the holes to replace the fog lights) without removing the entire bumper? thank you
@HOWTODO082818 күн бұрын
Yes it's possible. It's holding in with some plastic clips. But I recommend you to remove the wheel dust cover and try to push it outside from inside the bumper. Just to be safe and în this way you Wil see better what's going on in there.
@mcn187018 күн бұрын
Great video! I recently have a P245B error code, does take it out and clean it solve the problemn (perhaps)?
@HOWTODO082818 күн бұрын
Probably not. În my case I had to replace the entire EGR VALVE with a new one because cleaning it didn't solved my problem. A new one it's around 300 euros.good luck man
@LukasFunkB18 күн бұрын
I have skoda superb mk2 2011 year back seats heating are working properly, front seats movements lumbar support all working just not heating when i press button for hewted seats the light is on but no heating any ideas? Checked all fuses they are all perfect
@HOWTODO082818 күн бұрын
În the worst case scenario the heating element from inside your seat it's broked. It's not likely to be like this on both seats.Also check the heating module from under the driver seat. It's probably broked.
@LukasFunkB18 күн бұрын
@HOWTODO0828 thank you i will check it 😊
@LukasFunkB17 күн бұрын
@HOWTODO0828 hello again so i checked everything the wire that coming from the floor there are no any electric power but fuses are good i cant see any broken cables
@HOWTODO082814 күн бұрын
Check more carefully...you could have a broked wire hidden somewhere. Check if you have voltage in the pins wich give you heat when you turn on the heating in the seats
@MuhammadRizwan-lq5ie19 күн бұрын
Very good 👍
@HOWTODO082818 күн бұрын
Thank you! Cheers!🙏
@jonathanarchambaud808919 күн бұрын
hello,i have a trafic 2l dci 115hp year 2013,its the same oil?thanks
@HOWTODO082819 күн бұрын
Yes, it is🙏
@ONLYROG19 күн бұрын
Great Video, this will be my guide to replace my door handle!
@HOWTODO082819 күн бұрын
Glad it was helpful!🙏
@pkfan511220 күн бұрын
It is common sense to remove the fill plug first,
@HOWTODO082820 күн бұрын
Yes
@warrenfiddy20 күн бұрын
Load of sh*t, responsible for a broken trim on my car, the clips pop out from behind you don't pry them off
@HOWTODO082820 күн бұрын
Sorry to hear that. It seems you don't know how to do it.
@deonramesar985421 күн бұрын
u didn't programme it
@HOWTODO082820 күн бұрын
I got it programmed from the man who sold it to me 🙏
@funmuncher21 күн бұрын
Thanks bro super helpful!
@HOWTODO082821 күн бұрын
Glad it helped!🙏
@TheMrBennito21 күн бұрын
Can you tell me how that top bracket with i think 3 attachment places, next to the windshield, works? I have loosened things up after a small accident on the passenger side. I dont see any clips that connect that bracket with this front fender/bumper. I removed the headlight (irreparable) so everything is easy to reach:)
@HOWTODO082821 күн бұрын
I'm not sure how to explain you😔
@udcentrepreneur22 күн бұрын
Thanks for the video. I have a Nissan Qashqai 2007. The Right Passenger Rear Outer Door Handle is not retracting back in place. The door opens, but I have to push the handle back in place. Looks like the spring insight is broken or out of place. How can I fix that? thanks in advance.
@HOWTODO082822 күн бұрын
Probably the handle it's broked from inside. I recommend you to remove it from interior and check it.
@vrnwakeen387523 күн бұрын
That must've took a week to do 🤦🏽♂️
@HOWTODO082823 күн бұрын
It's difficult sometimes but it can be done if you're patient🙏💪
@antiochiaadtaurum378623 күн бұрын
it's a tricky enough thing to do, isn't it? needing that special bit to loosen that small lock handle bolt too
@HOWTODO082823 күн бұрын
It's easy my friend. With a good toolbox you can do it very fast and secure.
@antiochiaadtaurum378623 күн бұрын
@HOWTODO0828 a friend of mine has a mark v golf that needs the repair. I might offer to fix it for him. I just don't have the small torx security bit, if that's what it is. I've taken inner door cards off, but never the exterior panel. Cheers man 👍
@EasyonlineID24 күн бұрын
My headlight connectors are so filthy i cant tell how to open or compress the clip to detach it
@HOWTODO082823 күн бұрын
Just clean the and try again like I showed in the video.
@pooatpauls1024 күн бұрын
Another great video, thanks again!
@HOWTODO082824 күн бұрын
Thanks again!🙏
@pooatpauls1024 күн бұрын
Looks such a big job, but it’s like 20 mins really max, when you know how! Thanks so much.