@@Fanslie yeah I hear you. Just tell the next person who says Have a blessed day to have a HELL of a DAMN good day yourself. They won't get it but you'll feel better,

@@PopeyeKF4LBG just don't buy anything from titan! Hope you enjoy it. Everything has it's pros and cons. Saving up for a sawmill. Still haven't used my damn stump grinder yet. And I am looking at cfmoto 500s. Still getting over having kidney stones broken up with a laser and my stent removed so been limited in fun. But have to be selective of who and how much of my money I give to anyone because none really deserve it. Peace.

@@PopeyeKF4LBG oh and I think you mean the 4025?

I'm currently looking for one haven't made my mind up on the 3026 of the 4025

@@halp.3640 six one half dozen the other. The differences are pretty insignificant really. Is a 20 inch trench better than a 16? Sure, but not if you need 12 inches. And really, what can't you pick up with 2000 capacity that you can't with 1500 and a couple snatch blocks? Get a bigger bucket the 3026 is a joke. I had a Deere, that shits a fucking bucket!!!! The rops on the 3026 will not take the aftermarket cover just about every other tractor will because it's offset. Look at a pic. Look at the yamar tractors if you haven't. It was between the two and the BB dealer hooked me up, the yamar sold BB too but didn't mention rebates, discounts or offer a veterans discount. Hope that helps some. Ask anything else, if I can help.

@@JenniferBuechner being me and new I probably overtightened but customer service still sucks.

@rakevanderzen8785 Well, some things will always have a flaw. That's just how mass production works also. Every once in a while you will get one out of every 1000 that is flawed. I just ordered another set of hoops off of Amazon, just in case. 😆

@@JenniferBuechner hey. Thanks. I ordered like a five pack for chump change really. It was more about the customer service. Forgetting like a dumb-ass I had other sized hoops to use the brother in stages, then I just bought the bernette. That is a decent machine but the brother is good for what it is, for $300 that is.

Yeah I don't have battlefield 5 but I just checked it out it looks pretty good it's on sale for like less than 8 bucks so I may pick it up but the minimum requirements on that is like an RX 560 so my card will chew that up I'm not worried about that. The other reply talked about body cam that's a multiplayer game I'm not a multiplayer person, I don't play well with others. I have a bar and most people are dick drawers. It's great because before I made that video I just uninstalled for spoken. Like one of the worst games ever. The minimum graphics for that are an RX 5500 XT 8 gig and I had no problem playing that but only at 30 frames.

Dude did not just like come out this week? LOL actually I'll try the demo or see if there's a demo or I'll download it from steam and then I'll return it if it sucks

@@rakevanderzen8785ok

@@mdacosta7013 thanks for the heads up. Just did the research real quick. Saw that I'm actually 3 lb over. The 40 foot pounds each tooth requires is the minimum. I KNOW THAT'S NOT YOUR POINT. It worked out it should be set to 37 and change. For the grinder there I'm at 42 and change. Thank you for the knowledge!! PEACE!

@@savedewey1314 hey no doubt I thought about that but I shouldn't have to I paid $700 plus for those things and have been nothing but a hassle. I wouldn't buy Titan or take a Titan product if they gave it to me. Go ahead and do that then try to claim the warranty for something and they will tell you when you voided it by doing that. And if they can't measure THAT hole then the thing may up and vanish like a fart in the wind for nothing! When I read reviews I saw some people did that. But I wasn't going through that, not that I can't, if you watched anything else on my channel you can see that I pretty much do everything. Titan simply cannot measure. Made in America means ah nothing to ah Titan.

I had the exact same issue, I just got my pallet forks, I have the bad boy 4025 tractor

@@BombsAwayLP but how do you like that 4025? Because if I had a little bigger lot I would have got that. Wish I saw my video first. Sorry man were they titans?

They are Titan forks and you're right they can't measure. Of course they probably have an American education probably Catholic school or something don't know how to measure. Maybe if we use the metric system they would have been spot on. Bought them on Amazon and they're Titan . And Titans customer service is the worst insulting condescending jerk off and think that you're just returning a pair of shoes when you're returning like a 450 lb object.

kzbin.infoLUxmpw4cI-s?feature=shared

@@John-i9j4n direct from titan. Shipped in two pieces but had to be returned as one and fed ex won't pick up. Titans customer service doesn't exist and insults you by telling you to purchase the correct one NEXT time. They are a "Standard" but not. Made in America means zero.

@@rakevanderzen8785 thankyou ,and I thought that was reputable company, I hope everybody reads your comment and takes evasive action before dealing with them,

@@DevMfWalker I did this shortly after that vid. They were both junk until I modified it. Thanks for spectating!! kzbin.info/www/bejne/oXPUfmmXe8yGipofeature=shared

@@jorgeveigas6748 to Yes. But it's about the stabilizer too. Depending on what you are embroidering on. Then the size of your needle. Both are good but not in the same class.

IDK about all that, but thank you very much for commenting. SOMEONE who else GETS it!! Joke or not!! LMAO!!

Like I said I used the trial version and wasn't impressed. And I used the PE design brother you can find online for like 30 bucks. When I checked your site and I didn't see anything about any Bernina nine software. youtube.com/@katiethao250?feature=shared Unless I missed it you can drop the link here.

I have gotten better, but picked up the additional nut/bolt, and i thought it about after but i picked-up the other hoop sizes on amazon and could have just used one of those. The customer service is the worst though.

It's nice. It's quiet. It has weight with the 4 amp hour battery. I have the wen battery pole saw and the leaf blower. The chainsaw comes with one 4 hour battery. Not that you asked but the pole saw and leaf blowers came with 2 hour battery. Neither last remotely that long. Oh never use the chainsaw below the 2 of the four lights on the battery. Makes it less time but no more old gas to get rid of is enough for me. Hope that helps. Ask anything else if i can help

I use to be amazed when dispatch would say "we don't tailgate". Then the driver arrived lol and could see why. There use to be a type of person who did a job and knew what that job was. Now? Most are just delivery drivers, but sometimes we get lucky!

There is video sewing thru like 6 layers of denim. The machine is pretty powerful, but its more the needle, so make sure you get the correct ones. I returned this 6700 and got the 6800C do not buy this one. The screen doesn't light up. kzbin.info/www/bejne/f569h6eVfJ6GkMk

@@rakevanderzen8785 thank you mate. Definitely going for the 6800. Specially if you're sewing at night that light die the LED screen comes in handy

Good. I think, i dont remember, but the 6800 has some extra features and stiches, as well, and i can vouch for sewing at night, between the light over the foot and needle, and this it is pretty bright. Also, i would recommend the extension tray, i cant even imagine sewing without it now. @@Helios.vfx.

@@rakevanderzen8785 thanks mate. Will add that up to the budget.

Thanks man. Go on Amazon site and type in Platinum Embers the first two are Embers Midwest Hearth and advanced Catalyst then rock wool is under that. and if anybody's reading this it is in the European nation Rockwool is the third and fourth which makes me "think" that might work in the warmer just a thought. I also just found these on Walmart.com eBay and Wayfair. Hope that helps. Let me know.

If you're talking about the road is the side of a mountain.

Happy I could help. Thank you.

I think cigarettes filters melt more than retain shape and hold an ember. Let me guess you can't get it where you live? I have seen these things. They're metal ish. They are used in cannabis, expensive side, cannabis devices. It kind of looks looked a more dense version of what Zippo uses as the new catalysts. At least it looks similar. It's for concentrates and dabbing.

Yeah. The more you do it the different people who do it everyday, if they're cool, have no problem sharing ideas. Thanks for checking it out! Hope it helps and have you ideas.

That seemed very tricky,, steep grade,, PTO in gear, ,trying to get the right "RPM's,, don't do a wheelie,, and don't stall ,,😅 Outstanding !!

Thanks man. When I can help I think I'm more tolerated lol.

Isn't that naptha like 99% pure?

​couldnt tell you i honestly dont know! @@rakevanderzen8785

If what I shared saved you time, money and/or aggravation then a hero I be! lol seriously tho glad I am not the only one who KNOWS there is a solution out there somewhere and that success follows persistence.

@@rakevanderzen8785 it's that there is a way to bypass it and it sticks it to companies that put out an inferior product solely for the purpose of market sustainment. "If we sell a product that lasts a lifetime, we only sell one product"

I would say if you are using the 6 hour line and not getting at least the full six hours that's when I did. And that was after a lot of use in the winter daily and for at LEAST six years of not seven years. Anything else I can help with just ask. How that helps.

@@rakevanderzen8785 thank you for answer, so one time catalyst set up goes about six year?

Oh no. THEIRS yes! When YOU do them I guarantee yours will probably last closer to 8 if not 9/10. If only because they're yours and you will do a way better job on them than the manufacturer I'm sure. Happy to help.

I ordered them on Amazon years ago. I wasnt kidding when I said they'll last forever. It seems like the EU doesn't want these over there. A lot of people have mentioned they are hard to get. There has to be another catalyst besides that new metal garb ball metal steel woolish stuff they replaced the old catalyst with. Let me know how you make out.

Did you find any..? I'm swedish too and can't seem to find it anywhere online so I'm thinking instore somewhere maybe :/

Found it, but the pricing made me buy spare original catalysts instead. Great idea but not with shipping and inflation ^^ @@siwoue4734

@@siwoue4734 it has to be a European thing. They don't want those in the country or something I don't get it. They throw them on a fire in your fireplace so it's Sparkles, so you can use it as a Zippo replacement Catalyst, but it's for your fireplace it doesn't even make sense. I wish I could send it to everybody because I have more than I need with the video you saw