Couple of things. Why can you OC with a regular PSU and have melting problems with the server psu. Voltage. The standard PSU puts out 19 - 19.5 volts while the server PSU puts out 12 volts. Back to HS Physics, Ohms law. It takes more watts to get the same amps the lower the voltage is. So the 12v psu uses a lot more watts to get the same power throughput as a 19.5 volt psu,which leads to heat, which leads to melting the center of the barrel plug out. Moral of the story I tried a 6 pin adapter, melted my 6 pin on the board and will never do a server PSU again. I got one of the drok PSU's you can connect up to 3 machines to. 2nd, if you need it repaired, look at @crypto440 I saw his videos, contacted him, and sent him my miner and he fixed it cheaply and quickly. I saved a lot of money by taking the motherboard out and just shipping him the mobo. I tried removing the barrel jack and replacing it myself, but it uses hi temp solder and I couldn't get it off. Waching @crypto440's video, it's a case of the correct tool for the job! There's a video of the incident and repair on my channel. Please don't use 6 pin cables on your KS0's, AL0's or RX0's.

Sorry for your troubles. The barrel plug ends might be a little too loose inside the receptacle end pin, which would cause a bad connection and extreme heat under load. I hope you get it all fixed up!

That's why I don't like overclocking all sorts of things can happen. completely open it up and have a look at that.

Sorry to hear about your cable issues. I had a Veteran V1 cable that melted but fortunately didn't damage my KS0 Pro. They replaced it with a V2 cable and it worked fine. I went ahead and replaced 3 others with V2 cables just to be safe. I did not overclock my units as Veteran Miner said it would void the warranty and the barrel connector could not handle the extra load. Hope you can get the units fixed. Good luck.

Reach out to @LukewarmMiner Im sure he can help. Good luck.

It's a long story but i have four of the these (Ultras) brand new in box that have been STUCK in another location since they arrived in the USA for the last 9 months (at about 299 each) with only 2 additional operating rn. It has been such a hassle. (and heart breaking) I'll finally get them in the next few days. Part of me knows selling them is probably the right move BUT I essentially have free power so it's a tough call. Thinking about solo mining all of them for a hail mary. The 2 of 6 I have actually up and running have (also^) hit 3 blocks this month. I really do like tinkering with these damn things too. Any thoughts?

How's the phone farm coming along? That's the real question 😉 Verus FTW

Keep on mining before you end up like me flying kites. 😂

As a hobby I can absorb some hardware and electrical cost. However, I've solved three blocks so far in Jan on my 300GH oc KS0P. 🎇#sologang Thanks for sharing.

Hello sir, when I updated Ng metamask sir, I forgot my password,then there is no other option but only reset, then I reset and use my 12 phrase, then my account got open, the tokens are gone😢

Who's that friend? 😂 Good video thanks.

Samsung Galaxy A14 5g are about $39 @walmart 4.80 mh/s, I bet setting it up your way it would a higher mh

Hey there, great vid! If you could somehow re-upload those firmwares for others to use that would be great as it is impossible to find them now, as they are no longer being hosted! Thanks and cheers!

Wow, what an inspiring story! *Skillful RecoveryTech* is doing a tremendous job giving people a second chance after these scammers rip them off. It’s not just about the money-it’s about restoring faith and standing up for what’s right. Thank you for everything!

Damn you're good. It's honestly humbling to witness how far you'll go to end this madness. The compassis people you know the scammers could be, and how you want everyone to be free of this sickening behavio knowing so many people are scammed daily, but it's a reminder of the good which can be done by honest perfidy. Please keep it up. *Skillful Recovery Tech* and thanks for recovery my $125K from the scammer fake investment wallet back to my coinbase wallet

Please share the base firmware of Z11,i have problem with the one on bitmain website.

Great analysis, thank you! A bit off-topic, but I wanted to ask: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). How should I go about transferring them to Binance?

Good info and video thanks,

I have everything set up. It 'works' but no pools register that I'm mining. I don't get any movement about accepted blocks. Just constant New block detected ever ~15 minutes on Kryptex pools. On the public pool you referred I get "stratum from pool 0 requested work restart' I left it running for hours and it never changed... I'll try a few other pools, but I'm not sure what the issue is. I'll add, that I have 7 bit erupters and 1x Antminer U1 going. They're all picked up by cgminer and display hash rates, so I know that's not the issue.

If you manually import a token with the correct address and it works, but the balance still says zero, what can you do?

Hi, how to search for nicehash port number?

Thanks for the update, I recently did this conversion for my L3+. I have one in the living room and use it to heat my house during the winter.

This helped me understand the process. But when I did ot the token amounts didn't transfer over. All still showing 0 balances. Why is that??

This is the error I am getting after the flashing and verification process: "Something went wrong. If it is a compressed image, please check that the archive is not corrupted. The writer process ended unexpectedly." Any idea why I am getting the error?

I got the following error after I tried to flash using balena Etcher: "Something went wrong. If it is a compressed image, please check that the archive is not corrupted. The writer process ended unexpectedly." Any idea what went wrong?

What wallet do you use?

Cool 😎

😂

If you were trying to overclock it for the most amount of safe MH what's the highest power you would give it?

Thanks for the tutorial. But I have a problem.I don't see my devices on the website: public pool

How much does zergpool make compared to whats estimated on their site?

Thank you very much! With this tutorial i could unbrick my KS0 Pro!

Which mining tool can I use for poolin

i watched yours and PAgerClip video, and yes , hashrate went up compared to VerusMiner, perhaps, with verus Miner i could have the phones with screen off, and they woudl still Hash, but with CCminer is screen goes off, hashing is gone. I do need to run the phones with screen off at times, as in order to preserve batteries I use a timer to turn on and off the charge throughout the day

Are you going to try hardwiring the phones to bypass the batteries?

I'm with you till the halving. I's looking at other tokens but for now with verus.

Cool

Thanks! for the info Dude

Good video thanks!

i was told the A03S' would not bloat! WTH.. I have them on timers but still..

have you been looking at Acurast? I have 10 phones on that at the moment as well.

guess i'll only be hashing away for another 80 days on Verus...

Can you make me a sample bat file for 10 pcs USB Block Erupter. Thanks in advance.

bro i have 16 RX580 8gb...and they are mining raven...i dont care about profitability becuase opf the free electric... :) mine settings are almost the same...

Vich application we can use for Android mining

after use this software my fan will stop but the graphic card still can use pls help

I have found the opposite to be true. I have 12 phones currently mining and found that when they were running ccminer, they were unstable and needed to be restarted a lot. Running the Verus Miner apk I haven't had to restart or babysit any of them. They're all happy doing their thing with decent hashrates.

Thanks for your great video! How are the KS0 Ultra doing with only 12V? I'm a bit worried to change to a 12V PSU

You do NOT have to activate the Orbics - you can use a formerly activated Verizon SIM - the same SIM - one time in each phone and that's it. I bought several hundred from the same guy - and 1 used Verizon SIM off ebay for $7.

Hi, At first I did everything you said but it didn't work until I read below in the comments that I should clear the cache and browser data and only after that did it work, I tried it first in incognito mode and if it opened it was because I had already done everything else, ufff I had already spent several hours trying to access