Hi sir, My name is Juan castillo, and i'm an high school student, and i want to investigate in research gate, but i can't because i don't have an institution email, i want ask You if you maibe can send me an invitación to enter in research gate?
@LYSStuff3 күн бұрын
Hi, can't help. you must me one of my Co authur only there is a link I can click it to send the invitation.
@TheYuyuChannel9 күн бұрын
This help so much thanks
@LYSStuff9 күн бұрын
@@TheYuyuChannel welcome and thanks for your support
@TheYuyuChannel9 күн бұрын
@@LYSStuff I have e88
@LYSStuff9 күн бұрын
Nice, almost same functionality
@TheYuyuChannel9 күн бұрын
@@LYSStuff it works properly
@rohitsrivastav503711 күн бұрын
Hello sir How to add the tensor material through the variable .
@LYSStuff11 күн бұрын
As long you have your tensor material dielectric properties, then just define as your new material
@LYSStuff11 күн бұрын
If you do not have your tensor material dielectric properties. Then you need to measure it using dielectric measurement, then use the measured value and define in CST
@kaihans137111 күн бұрын
Will it work if i change the region in the normal settings
@LYSStuff11 күн бұрын
Hi, I'm not sure what do you mean 'normal setting'. To download some China version app, require to change the iOS region to China Mainland.
@kaihans137111 күн бұрын
@@LYSStuff like in the app settings
@LYSStuff11 күн бұрын
Can't, if you download international bilibili version. Change setting or language will not change the app to China version. Is totally 2 different app
@noidea0112 күн бұрын
Sir!!! Thank you so much sir ❤️
@LYSStuff12 күн бұрын
@@noidea01 welcome and all the best
@Iodestarr12 күн бұрын
This ALSO gives you 999 of EACH oberyth for some reason. Which is dumb. Other than that, it works fine.
@primenews584213 күн бұрын
Bro can you add my article to your section? I'll pay
@viktoriapavlovski498513 күн бұрын
can I contact you?
@LYSStuff13 күн бұрын
Hi, you may email me (my email is at my about section)
@LYSStuff13 күн бұрын
Hi, I just saw your email. You may refer to this video for Yagi antenna design kzbin.info/www/bejne/jqTRf3Wleq99sJo. using the calculator in the description to get the initial dimension. Then, adjust the dimension to meet your specify frequency.
@AmanShekhar-f9m16 күн бұрын
Sir, is it possible to embed periodic multi-layer grating structure in ring resonator using this software?
@LYSStuff16 күн бұрын
@@AmanShekhar-f9m Hi, Yes, you can
@sarittasarah926317 күн бұрын
Thanks for the video But how to connect with wifi? I dont find anything when I search WiFi 😢
@LYSStuff17 күн бұрын
Hi,you need to turn one the drone 1st and only search for the WIFI
@laibabeig378018 күн бұрын
What Will be the dimensions of 1 GHz patch antenna ?
@LYSStuff18 күн бұрын
@@laibabeig3780 please refer to the calculator in the description.
@johneso19 күн бұрын
Thank you for this information. But, please my articles are not showing whenever I search for my name or article title. What could be the issue? And can I just add it manually then?
@LYSStuff19 күн бұрын
Welcome, you may refer to this video how to manual add your article. kzbin.info/www/bejne/d5bMZWOVedajqpo. Based on my experience, some new accepted article require some time to publish and detect by Google scholar. Might be 1 or 2 week after your article published by publisher
@Itz_Zan-019 күн бұрын
my e99 when try to fly is always bank angel to the right and left
@LYSStuff19 күн бұрын
@@Itz_Zan-0 yea, we can calibrate it using the remote control
@LYSStuff19 күн бұрын
@@Itz_Zan-0 must calibrate to make it more stable
@PetrKvapil-nt6jw19 күн бұрын
Can I use? This battery 7.4V 1000mAh 25C 2S LiPo
@LYSStuff19 күн бұрын
Can, as long able to ouput 7.4V and above
@ResistDemise20 күн бұрын
No way! I switch hobbies from radio astronomy to drone and you are here too!
@ResistDemise20 күн бұрын
Guys please check out how to design helical antenna on CST, very interesting...
@supremxyyt21 күн бұрын
THANKS DUDE
@LYSStuff20 күн бұрын
Welcome
@isabelchilunda338422 күн бұрын
How can I download a video with no download option?
@LYSStuff22 күн бұрын
Hi, can't. Because owner disable others to download it.
@usamatahir135324 күн бұрын
Hello we calculated the S11 and S21 parameters experimentally of our material. I want to check the absorption and reflection of the material. But we don’t have permeability and permittivity of the material how we can calculate these parameters? We used coaxial line method to calculate the S11 and S21 for our material.
@LYSStuff24 күн бұрын
For your case and setup is not with metal backed plate. You cant use this calculation and also you have no permeability and permittivity value. You should just use the equation of Absorption = 1 - s11^2 - s21^2. S11 is you reflection of the material, you may refer to this video kzbin.info/www/bejne/rJLIkKGDhbuCiaMsi=zeUU8wL0mFtulq2f
@usamatahir135322 күн бұрын
@@LYSStuff we make a material with PDOT and MCWNT(carbon nano tube) you say it our material is conductive and absorbs the EM waves. We find out S11 and S21 parameters for different frequencies and experimentally right? our material is new we don’t know its permeability and the permittivity and loss tangent when defining a new material in the simulation. How we can find out these things. Could you refer me some video or can tell me formulas? Because when finding the permeability and permittivity we need to use reverse algorithms and formulas. And it also contains Cos^-1 (cosine inverse function) so how we will be sure our permeability and permittivity is accurate and will give us accurate values to match the experimental and simulation values. I will be very thankful if you can guide me on this.
@LYSStuff22 күн бұрын
@usamatahir1353 yes, try to use NRW method to calculate material properties from you S11 and s21. But if your method of measurement is incorrect (without proper calibration such as TRL or others factor like distance define) , then the results will looks weird.
@usamatahir135321 күн бұрын
@@LYSStuff yeah this is what i think. Thanks for reconfirming about NRW method. I was confused about the method. Thanks have a good day. And keep in touch. I am happy you share your thoughts.
@nazmiimtiyaz52729 күн бұрын
this is amazing!!! thank you so much for the knowledge!
@LYSStuff29 күн бұрын
Welcome and thanks for your support
@我不當人了JOJO29 күн бұрын
我是安卓用戶,非常感謝教導。正在考慮換蘋果手機 XD
@LYSStuff29 күн бұрын
@@我不當人了JOJO 👍👍
@divyashreem9899Ай бұрын
Great video. Learned a lot from this Sir. Thanks a lot for sharing with clear explanation😊😊😊
@LYSStuffАй бұрын
@@divyashreem9899 welcome and thanks for your support. 😄
I dont know why but when I try to join to the WiFi it tells me that there is no internet conection. Please someone tell mě where is the problem.
@LYSStuffАй бұрын
@@mikulaschaloupka6589 Just accept the WiFi with no Internet access. The Drone WiFi just for your phone sky fpv app connect/communicate with the drone. Then your phone Internet will witch to you mobile data, because phone WiFi is used for connect with drone WiFi. No worry
@mikulaschaloupka6589Ай бұрын
Wait and does the WiFi name need to be DU-HD4K-and numbers?
@LYSStuffАй бұрын
@@mikulaschaloupka6589 yup, you may refer to your manual guide. It should got mention the WiFi number
@mikulaschaloupka6589Ай бұрын
I'm so sorry that Im asking that many questions but when I try to join the WiFi it says No internet and when I have my hotspot on it disconects from the drone WiFi. And even when I have the drone WiFi (in the app there is still nothing.) I dont know where is the problem. And I think that on the Camera there is a cover.
@LYSStuffАй бұрын
@mikulaschaloupka6589 the camera cover you need to remove it, eye the camera lens is blocked by the cover/sticker
@ranjanishrim7242Ай бұрын
I didn't get that stero in my lap what can I do😢
@LYSStuffАй бұрын
@@ranjanishrim7242 hi, please check at the video description, there is a link for download stereo mix. Hope it helps
@PetrKvapil-nt6jwАй бұрын
You are the best KZbinr
@LYSStuffАй бұрын
@@PetrKvapil-nt6jw thanks for your support
@PetrKvapil-nt6jwАй бұрын
Please support me also
@PetrKvapil-nt6jwАй бұрын
Can i use 6,6V 1000mAh 8C Lipo baterie
@LYSStuffАй бұрын
Cant, minimum power supply required is 7V, kzbin.info/www/bejne/e3PUp6ywn9qsr6csi=Wg-K4hEinbpaYKm0&t=263
@PetrKvapil-nt6jwАй бұрын
What battery do you use for the transmitter?
@LYSStuffАй бұрын
Hi, I'm using 2S LiPo that 7.4V to 8.4V
@toheedhАй бұрын
simple, straight to the point derivation, perfection.
@elrumi99channelАй бұрын
Saya mempuyai e99 pro juga bang
@user-gc5vp6bf8kАй бұрын
My plane when I press the takeoff button does not rise but goes forward Please reply
@LYSStuffАй бұрын
Hi, Maybe one of the motor at blade side malfunction causing not balance. Therefore it can't rise.
@user-gc5vp6bf8kАй бұрын
Is there a way for me to fix it? @@LYSStuff
@Omarmirza123Ай бұрын
Mine is swimming in Baltic Sea 😅
@LYSStuffАй бұрын
So sad.. 😰
@dennisgonzales9521Ай бұрын
What if there is an update to the bilibili app do we have to do this again?
@LYSStuffАй бұрын
@@dennisgonzales9521 Hi, so far my one can auto update without repeat the step. Just like normal app.
@Benny_ShillАй бұрын
Neogeo supported?
@LYSStuffАй бұрын
Hi, Yea, I just added the Neo-Geo emulator link in my description. check it out
@QaripppliАй бұрын
Thank you
@LYSStuffАй бұрын
Welcome and thanks for your support
@tomscairo9516Ай бұрын
Thanks, it works so well.
@LYSStuffАй бұрын
@@tomscairo9516 welcome, glad it helps
@anotheracal2825Ай бұрын
How about the camera resolution?
@LYSStuffАй бұрын
@@anotheracal2825 it stated 4K in their description. But I think is only 1080.
@anotheracal2825Ай бұрын
@@LYSStuff nice.
@LYSStuffАй бұрын
There is a typo for Vp = 207 x 10^8, it should be Vp = 2.07 x 10^8
@LYSStuffАй бұрын
There is a typo for Vp = 207 x 10^8, it should be Vp = 2.07 x 10^8
@noName192-f9lАй бұрын
Mine doesn't lift anymore any tips
@LYSStuffАй бұрын
if before this can lift up, now cant. I'm also not sure what happen. Maybe is low battery or remote control doesn't connected with the drone.
@syuhadanazri996Ай бұрын
Thanks a lot! It is really helpful
@LYSStuffАй бұрын
@@syuhadanazri996 welcome and thanks for your support.
@awesomusmaximus3766Ай бұрын
It can only do 640 by 480 it's junk
@LYSStuffАй бұрын
Yea, that's the limit. Could you share higher resolution FPV receiver with cheaper or similar price?
@awesomusmaximus3766Ай бұрын
@@LYSStuffIt doesn't work all i get is distorted audio there's no app either
@awesomusmaximus3766Ай бұрын
Android won't allow the app because it is not an authorised app
@LYSStuffАй бұрын
The video shown working fine and my phone is android phone.
@awesomusmaximus3766Ай бұрын
@@LYSStuff actualy all i get is audio on windows
@afiqzikry6782Ай бұрын
so it was possible for some random people can connect to my drone fpv camera?
@LYSStuffАй бұрын
Depend, some drone FPV camera required to connect fpv camera WiFi (with passcode) only can detect. But some fpv monitor or scanner can direct scan and grab FPV signal (FPV video)
@joshrobloxreviewАй бұрын
My one keeps falling😂😂😂😂
@LYSStuffАй бұрын
@@joshrobloxreview stay calm and steady.. XD
@joshrobloxreviewАй бұрын
STILL BRUH!
@LYSStuffАй бұрын
😅😅
@bbgsankalp1987Ай бұрын
Thank you it's nice
@LYSStuffАй бұрын
@@bbgsankalp1987 welcome, thanks for your support
@no5x937Ай бұрын
Was this software written in C++? Was it developed on Qt5, Qt6, Visual Studio 2022? Is the source code available?
@LYSStuffАй бұрын
C++, u can check in the github
@thekekronomicon590Ай бұрын
Mine just goes full power and then shuts off but the lights are still on
@LYSStuffАй бұрын
Sorry, can't help for this unusual behavior.
@LYSStuffАй бұрын
😢
@abhijithas9976Ай бұрын
Sir why you take s21 as -3db Why not -4 db is only because of half power. Then what is the spacality of half power?
@LYSStuffАй бұрын
Generally for RF component in data sheet, we use - 3dB to indicate the performance of the RF component after less power 50%. Or cutoff frequency OF RF Filter or power divider
@wanted_f-16Ай бұрын
Thank you sir.
@lboggan417Ай бұрын
This is REMOVING the account, not signing out of the account.
@mnasongoga1074Ай бұрын
any different? This the only way sign out/removing account from android phone, after sign out/removing account, it still can login back. Could you found sign out google account word at android phone? please share to me.
@lboggan417Ай бұрын
@@mnasongoga1074 Yeah, it's very different! The message I got was that this would delete all the data. So that's very different than signing out. Problem is, I don't think evil Google wants anyone to sign out. That's why it's so hard/impossible.