Adrian202 RC (Adrian202)

Пікірлер

@aliffasyraf5719 Күн бұрын

Me facing my lifting mecahnism not lift when i press button on remote.. do you have any idea what cause?

@Adrian202 Күн бұрын

If rest work, We will know it's not battery. In that case, the fault could be on the remote or electronic inside forklift. That could also be blocked mechanic for lifting (sand could get inside gears or rope got tangled) Start with removing batteries from both and let electronic drain capacitors to see if electronic reset would help if not I think fault will be on forklift side.

@Ken0bin 12 күн бұрын

Even if it doesn't work at EsCon, you could bolt the trains so they don't get detached, just for a exhibition

@Adrian202 12 күн бұрын

Trains are not a problem, hinges are. Also show on EosCon to who ?? 10 players online + shadow realm

@krisloaf 12 күн бұрын

man i miss icarus project game is a lil boring tho

@Adrian202 12 күн бұрын

Sadly it is, mostly You some new players :(

@AcEkrystal 12 күн бұрын

Really cool! I have never seen these things being used by someone before you and Alkash. Let alone working trains switching systems. Ya made me smile :3

@CrispyChestnuts 12 күн бұрын

Dope! I love non ship gizmos in Starbase

@Adrian202 12 күн бұрын

I have an idea for next use of them, but I don't know if there will be anyone to play on it sadly :(

@mariaghernandez7380 22 күн бұрын

I can’t buy it anymore😢

@Adrian202 22 күн бұрын

Sadly, Aliexpress also don't have this one anymore. I just finished this one: www.aliexpress.com/item/1005007798684323.html?spm=a2g0o.order_list.order_list_main.122.851718025RfreD A bit expensive but best instruction I ever followed and great to watch when it's on :)

@yasharahmadi... 26 күн бұрын

I have ramp1.6 When i use bltouch my screen is off can you help my problem??

@Adrian202 26 күн бұрын

That could mean wrong connection that cause short, check all connections. That bltouch could also be faulty

@yasharahmadi... 26 күн бұрын

Hello 👋👋

@Adrian202 26 күн бұрын

Hello

@STRIMIX Ай бұрын

11:05 you have 3 extra what?? 😅😂

@Adrian202 Ай бұрын

:D I never notice that translation :D

@nickmyers3065 2 ай бұрын

THanks for the update ! Doing my first jump now!

@Adrian202 2 ай бұрын

So I understand You found what caused that frame problem also :) Congratulation, now You can design it as You want :)

@nickmyers3065 2 ай бұрын

I keep getting the ""overlapping frame components detected, PLEASE CHECK FRAMe". So frustrating. I'll rebuild it again. I swear im following your guide. I leave the game leave the area. It switched from the 1 checklist not working, to the thrusters. Then updates 1 or the other. Edit: i added some frames and shell. Probably user error. FINALLY First hjump!... 10 meters away :P

@Adrian202 2 ай бұрын

Mostly that happens when You place parts too fast or use macro for it (that's what caused it for Me) This mostly means that there are 2 parts in one spot, and they will glitch, so You should spot it

@nickmyers3065 2 ай бұрын

@@Adrian202 I jsut saw the video comment lol..... Thanks... Im watching your fix to plating rating problem lol...

@kevinharrison4909 2 ай бұрын

Mine wont read capacitors with reverse polarity the positive lead has to go in pin 1 and neg on pin 3.

@Adrian202 2 ай бұрын

Polarity should work in both direction, You just need to have one leg in 1 and other in 2 or 3 I think.

@kevinharrison4909 2 ай бұрын

@Adrian202 I tried with 1 and 3 but it only works one way and is unrecognised in the other polarity. Tried multiple capacitors including Panasonics. Same thing. Weird.

@jerrytubb5584 2 ай бұрын

Anybody done a review setting up the X10F(G) receiver.

@gunslinger9352 3 ай бұрын

Anyone that handle 8.4v. My servo want that, but the service plugged in to rx can only handle 6v

@Adrian202 3 ай бұрын

You need separate BEC for it

@Kirill_wawe 3 ай бұрын

Very interesting

@mhouslay7281 3 ай бұрын

Super useful and detailed video. Really very helpful and much appreciated. Thank you 🙏

@Adrian202 3 ай бұрын

THX for kind comment :)

@LilissariSari 4 ай бұрын

Kalo beli dimna ges....??? Kalo nyari onlen dimana kk..?? Minta tlg kak..

@Adrian202 4 ай бұрын

try here: www.aliexpress.com/w/wholesale-RC-LED-Beacon.html?spm=a2g0o.home.search.0

@aronowsky849 4 ай бұрын

Dziś wyszliśmy tym modelem w teren. Trochę błota było i przestał nam reagować na skręcanie. Cóż to się stać mogło?

@Adrian202 4 ай бұрын

Jeśli z oryginalną elektroniką to elektronika, bo one nie są najlepsze. Może też być jakiś przewód między serwem a elektroniką. Oczywiście może też być serwo skrętu, nie pamiętam czy to zwykłe, czy modelarskie. Trudno zidentyfikować, bo to może być kilka przyczyn.

@aronowsky849 4 ай бұрын

@@Adrian202 oryginalna. Przez chwilę sam z siebie nastąpił skręt i tyle. Padł.

@PieceMaker 4 ай бұрын

Thanks Adrian, as always right to the point. Can you actually tow your inside safezone ships to your hangar for credits like you can do at origin?

@Adrian202 4 ай бұрын

Sadly no, only Origin can and only from safe zone (can't tow to Elysium Moon City also)

@gauravluckyrauthan4 4 ай бұрын

nice work ❤..after adding two antennas, how long distance will it catch signal from receiver??

@Adrian202 4 ай бұрын

@@gauravluckyrauthan4 it's not that easy to say, will depend on that antena, receiver antena, antennas orientation where You use it. Could be 100m or 500m, who knows

@gauravluckyrauthan4 4 ай бұрын

@@Adrian202 ok. thanks for the reply

@Sans_550 4 ай бұрын

Thanks for give me tutorial 👍😐

@Sans_550 4 ай бұрын

OMG THANK YOU SO MUCH IM DEFINITELY SUBSCRIBING TO YOU IVE BEEN TRYING TO FIND THIS FOR SO LONG THANK YOU SO MUCH

@tomosko2669 4 ай бұрын

Thank you. Love it.

@phantomgamer4439 4 ай бұрын

is this good for penetration or for range?? cuz i did this mod and tested in my fsi6s the penetration was better in the stock antenns

@Adrian202 4 ай бұрын

Sadly, that will depend on how good antennas are and how they are aligned with the model receiver. With drones, it's hard because they move so specifically angled antenna will not work.

@Alex_cod101 4 ай бұрын

hey i have the same laptop but it has one issue, it seems to be not charging when turned off but does when its off, the laptop also cannot turn on without the battery plugged in and this is very annoying, can anyone help me with a solution?

@Adrian202 4 ай бұрын

@@Alex_cod101 you could take off battery, disconnect from power and hold power button, updating bios could help but it's risky if something go wrong. That could be some chip but I'm not that advance to tell what specific one

@UltraHurdlerify 4 ай бұрын

Very helpful, thx!

@PieceMaker 5 ай бұрын

Thank you Adrian, very helpful. Now I just need to find out how to fill my navigation chip with some data.

@Adrian202 5 ай бұрын

I did think about showing that also :D do it ??

@mcemtpockets1775 5 ай бұрын

Thats pretty cool man

@Adrian202 5 ай бұрын

Fix to plating rating problem kzbin.info/www/bejne/q3OzqJSVgZtmbJI

@CoverSongs-hz5os 5 ай бұрын

Very smart!

@royholman3467 5 ай бұрын

I love it,, Very handy device,, got mine a week ago :)

@Gamer-8727 5 ай бұрын

Just what I was looking for thanks

@CmdrGamagosk 5 ай бұрын

Useful tool and information as always

@CoverSongs-hz5os 5 ай бұрын

Just wanted to thank you for the free blueprints. I built both the Banchees on the test server and the Antlion on live. On my seconds haul outside safezone I somehow crashed it and it couldn't move anymore. So I teleported back to base but can't tow the Antlion, it says "ship is unreachable" - I guess I should have activated the transponder first. Fortunately, I still had enough cash to buy materials and construction for the "Money Maker". Will test this one now to recover some cash.

@Adrian202 5 ай бұрын

You can type to Me in game and when I'm on Origin I can craft you one :) Nick in game is Adrianrc

@Adrian202 5 ай бұрын

Or hop on to our discord :) discord.gg/hqWR5V2m

@GerardoMares-n5p 5 ай бұрын

Thanks adrian💪

@Adrian202 5 ай бұрын

no problem :)

@KnightofElElyon 6 ай бұрын

Hi, what would I need to add one of these to a static display? No RC, just an on/off switch with only the 1st rotation selected on a 9V battery.

@Adrian202 6 ай бұрын

I think You will need a servo tester to turn it on because power will not turn it on from what I remember.

@KnightofElElyon 6 ай бұрын

@@Adrian202 Thanks, will research that.

@deogeneslamadrid4474 6 ай бұрын

Hi can you tell me what parts to get to upgrade my steering for the same truck? Thanks

@Adrian202 6 ай бұрын

@@deogeneslamadrid4474 time pass from when I upgraded this truck and there are so many new upgrades for WPL type trucks, part list is in link but to older pars so best would be to check what new upgrades You can find for trucks this type (similar parts from WPL will also work )

@gamerscomplete 6 ай бұрын

I built this ship today, its great! thanks!!

@Adrian202 6 ай бұрын

@@gamerscomplete That mean You have version with the mascot on front that I don't :)

@javierdelacruz9119 6 ай бұрын

What settings you used in bios for the ssd? SATA RAID ON OR AHCI?

@Adrian202 6 ай бұрын

Always AHCI because it's faster from what I understand (not that advance :) )

@mcemtpockets1775 7 ай бұрын

Thank u about the atena and range

@PinkiYadav-fi6tn 7 ай бұрын

Bhaiya kahan se Li

@Adrian202 7 ай бұрын

Poland

@CmdrGamagosk 7 ай бұрын

Thanks Adrian, helped me a lot.

@dinoob4253 7 ай бұрын

is this in the Public Test Universe?

@Adrian202 7 ай бұрын

That's where I show how to build, but Mint Miner is in live next to origin 02

@obdnanrsmith8572 7 ай бұрын

Can you expand your entire capital ship zones using the station roads on live server or do you have to use cap ship parts only??

@Adrian202 7 ай бұрын

We use premade walkway L turn for that, You need if I remember 255 in each zone to unlock each zone and can't remove them in lest zone to unlock new one. If I remember, I did show that at the end of basic capital ship video. You can use station arts and ship parts also on capital but if ship part don't want to snap bolt it to ship, unbolt and then attach using easy build from inventory. can't use combined parts but You can use plates with decals :)

@B00MSPL4T 7 ай бұрын

Great video :)

@samcasters 7 ай бұрын

Thanks for the tutorial was gowing to start with my hanger pritty soon on my cap

@Sjokoen 7 ай бұрын

Just what I needed, just got all the mats to start making my cap ship so this was perfect timing :D

@Sjokoen 7 ай бұрын

So im about to make capital and im wondering how many exorium/propellant tanks i need, if i have 6 prop/exoroim tanks gow many generators do i need? Thanks :)

@Adrian202 7 ай бұрын

More generators = faster charge + more thrusters Bigger capital ship = more thrusters than You need much more propellant to jump. You can have like 2 tanks for 3 generators and one exorium processing unit and that would be fine, but I don't know what if You have more generators because both cap ships have only 3 You do want to have more propellant tanks because that will allow You to jump longer distance and with many thrusters that distance with get shorter :)

@Sjokoen 7 ай бұрын

@@Adrian202 so if i have a bigger ship i will use more fuel on each jump?

@ZNsolo101 8 ай бұрын

@Sjokoen 8 ай бұрын

Is it possible to have a video on the hangar ?

@Adrian202 8 ай бұрын

You mean how to plate that hangar the way I did ?? If I have some time, I try to do that

@Sjokoen 7 ай бұрын

@@Adrian202 thank you, would be great! i will likely start putting my cap ship together Also how many generators do i need per fuel tank?

@Adrian202 7 ай бұрын

@@Sjokoen I never tested that, in some point it will show You need more fuel to charge, I think one should be ok. Here is requested video kzbin.info/www/bejne/fqbMe32Zn7mgfas

@Sjokoen 7 ай бұрын

@@Adrian202 Awesome, thanks alot!

Ең жақсы KZbin

Пікірлер