I generally use a 2 x 4 to support the back wheel, but a stack of paper does a good job huh?😂
@9GSR14 күн бұрын
PLEASE TELL ME WHERE DID YOU GET THOSE winglets decals with the Texas flag. You are the 2nd one I seen with those, the first one was Ducati Austin owners bike, and the guys didn’t know where he got it from
@wailoonchung560614 күн бұрын
Did you need an up map for the exhaust ?
@LonestarMoto14 күн бұрын
I used brentuning
@DavidHemingway-u3e15 күн бұрын
Great watch thinking of doing the same to mine, great protection for the paint as well 😉
@LonestarMoto15 күн бұрын
It makes such a big difference in how they look, I’m definitely glad I did it!
@brettnixon11315 күн бұрын
I got a head ache from the second exhaust that Sound is insane
@ricardoleite635117 күн бұрын
Good job 👍 I have a friend who does that for a living and I know how hard it is to do. He did my Ducati Panigale with different decals but good job . All the way from Sydney Australia …
@LonestarMoto15 күн бұрын
Thank you! I wouldn’t mind being in Sydney right about now!!
@dario1517 күн бұрын
I just picked up a 2024 Street Fighter V4S and want to put this slip on onto my bike. Does the place where you got yours have good prices for my model?
@dario1517 күн бұрын
Apologies, I wrote this while waiting your video.
@jmrS1k2425 күн бұрын
its cheaper than FULLSIX CARBON but it will kill you in Shipping cost !!!
@LonestarMoto25 күн бұрын
No, you just have to order a lot, not one piece for sure
@allanschuster352025 күн бұрын
Thanks for the video. Great learning experience.
@LonestarMoto25 күн бұрын
Glad you liked it!
@shafiqu.268425 күн бұрын
what is the torque spec for the frame sliders ?
@TheJlagosd29 күн бұрын
Hello man where do you buy the v4r decals?
@GothamsaviorrАй бұрын
“I just installed an Akrapovic exhaust on a 2024 S1000 RR and it’s overheating like crazy. I undid the two hose clamps attached to the radiator to make it easier to install the exhaust. Everything is put back together. The reservoir is topped off with coolant to the max level, but when I squeeze the two hoses, I don’t feel like there’s any coolant in there. I have started it up a few times, and the engine is burning. Any suggestions on what to do?
@LonestarMotoАй бұрын
If you have everything reconnected, the only thing I can think of is that you have an airlock in the radiator somehow!
@GothamsaviorrАй бұрын
@@LonestarMoto Flush the whole radiator or just release the air out of the bleeder screw?
@SuperbikeCoachАй бұрын
What parts/bolts are you using to connect the carbon sides to the lower fairings?
@matthauskaczorowski6816Ай бұрын
Nice Video 😊 Did you adjusted the rearsets after riding? I mounted them on my Panigale. In my opinion the gear shifter is quite low. Difficult to get underneath with racing boots.
@gianmarcovignaroli1458Ай бұрын
What’s the difference between installing a servo buddy or keeping the original ? I’ve installed the exhaust without putting on the servo buddy since I didn’t have one. Now I’m thinking of installing it on, but I read on the web that installing a servo buddy after turning the engine on can cause problems. Thank you
@LonestarMotoАй бұрын
So at the engine isn’t tuned and you remove the servo there’s really no difference between the servo and the servo buddy other than it just keeps the light from coming on if the motor is tuned, you don’t need a servo buddy
@LonestarMotoАй бұрын
Obviously, the servo buddy is a little cleaner and lighter than leaving the servo in without the cables on it
@gianmarcovignaroli1458Ай бұрын
Got it. I will install one since it’s lighter and I don’t like to leave the original one without the cables on. Thank you for your answer! Really nice tutorial, I used it to install my Sc project exhaust on my Ducati panigale V4 S!
@LonestarMotoАй бұрын
Thanks and I’m glad it helped you out!
@Detudoumpouco-qw2oiАй бұрын
Top
@sumangayen4391Ай бұрын
Dose this exhaust comes with the akrapovic map included in the box ?
@motorjack1412 ай бұрын
Nice video. What’s the reason you replaced the SC Project? Also which sound do you like better?
@LonestarMoto2 ай бұрын
I prefer the dual exhaust, the sc is a great exhaust but so loud for the road. I have to say I do prefer the Akra for fit, finish and sound
@motorjack1412 ай бұрын
@@LonestarMoto I have personally ridden sf with akra and arrow, but haven’t had the chance to hear one with sc. curious as to how it sounds.
@adamalvey24912 ай бұрын
Do you mind me asking how much you paid, man? I'm trying to be realistic about what kind of deals are out there. 😂
@motorjack1412 ай бұрын
At 9:40 have you tried putting the exhaust bracket behind the holder instead of in front? Maybe that would make the gap to the midpipe a bit bigger?
@volentieri462 ай бұрын
kzbin.infoF5Zf0BEC-6g?si=xGFMwEkpyg7aoGPL
@volentieri462 ай бұрын
Thank you. Very useful!!! Greetings from Spain. ✌🏻
@LonestarMoto2 ай бұрын
My pleasure!! I am jealous I want to come to Spain!!!
I eventually got it fixed, it was bad prep on the dealers part that caused most of the problems, I have since sold it and moved on to something else.
@lomilomi35352 ай бұрын
In 1985 I bought am already old Susuki GS 750..ran like a dream with not a single issue...needed zero maintenance except the usual stuff....you would think with new tech things should not go downhill...But Japenese is the way to go..has been like forever
@youtubetop85912 ай бұрын
Isn't the manual in the link?
@LonestarMoto2 ай бұрын
What manual?
@youtubetop85912 ай бұрын
@@LonestarMoto akrapovic installation
@ChenglinYang-n4f2 ай бұрын
That looks so good. I want to buy one for my 2022 panigale v4 but the motomillion website write it work on 18-21 ducati. Does this exhaust also work on 2022 one?
@LonestarMoto2 ай бұрын
Yes it will work! It’s the same one I had
@FMXIAN2 ай бұрын
Thanks for these man just watched this and the rearset install videos you made it so much simpler
@LonestarMoto2 ай бұрын
You’re welcome!! I’m glad it helped you out!
@albertominini2 ай бұрын
Which tank cover are you mounting?
@SantiTheDev2 ай бұрын
Did you notice a change in engine braking after installing the system? I installed mine and noticed a big decrease in engine breaking and also when I spray soapy water on the joints it bubbles up meaning the joints leak and it's ALL of the slip joints. I've tried re-assembling it, it's as tight as possible and still leaks at every joint, but it's only noticeable with soapy water, I'm not sure if that's normal or not.... Please get back to me thanks!
@SantiTheDev2 ай бұрын
@lonestarmoto
@motogen243 ай бұрын
I bought an NRC fender eliminator for my rsv4 1100 factory 2019, but it wont fit properly its like something wrong, my question is your bike andtje model of mine has desame tailend? TIA
@LonestarMoto3 ай бұрын
It is the same bike, so either you have the wrong one or you are not installing correctly.
@motogen243 ай бұрын
@@LonestarMoto the tail light of RR and RF are diff from rsv4 1100 factory. my tail light has a narrow triangle where the still plates sits
@LonestarMoto3 ай бұрын
No that is not possible.
@motogen243 ай бұрын
where can i send the pictures so you can see whats wrong?
The matte carbon looks nice and subtle where who made the ones on your bike? Also i am thinking of getting the grid I exhaust can’t seem to find anyone who has them in stock here in the US
@kalbelloz1533 ай бұрын
Thanks a lot for your video 👍 keep continue this kind of video ... very appreciate it
@LonestarMoto3 ай бұрын
Thank you so much, I am glad you like them and hope they are enjoyable to watch.
@kalbelloz1533 ай бұрын
It looks cools🤟 for me
@popsproductions85473 ай бұрын
Bro you said it didn’t sound any better 😂😂😂 it fkn shot flames out the mf. Try a mid pipe install and bt tune. That keeps the servo open which allows more sound of course and decel pops. Valves in this engine only start to bust open around 4k rpm. 6k the fkr is now awake. Riding this bike or any of the S and M 1000 r,rr,xr under 4k rpm is just geh. Get on it then come back n say it sounds no better.
@Vinrx73 ай бұрын
Helpful video. Just a tip for those watching. The clip that is removed @ 2:45 is the same clip he removes @ 3:00. It was just a double take error. Also, when sliding out the ecu, it's easier if you turn the handlebars to the right. Makes more room.
@LonestarMoto3 ай бұрын
Where?
@Vinrx73 ай бұрын
You removed the same clip twice. 2:45 mark of the video & again at 3:00. I was wondering how you had an additional connector that mine didn't. Turned out it was just the same one.
@SEMSAworks3 ай бұрын
Did you sell it? I am looking for a spark it exhaust for my 24 s1krr
@LonestarMoto3 ай бұрын
Yes I sold the bike!
@CretoTV3 ай бұрын
what a machine buddy, solid video. I wish I could touch the floor on the v4, I'd probably have one like yours! cheers
@LonestarMoto3 ай бұрын
Thank you!!!
@allanschuster35203 ай бұрын
Thanks for the video. Is that kit spect for the 23 R? What ecu did you use?
@LonestarMoto3 ай бұрын
No, my bike is not the R model, I have the base model. I have bren tuning, check my linktree for discounts to bren tuning.
@porkenotekayas15384 ай бұрын
Good morning. I have a question. Is it necessary to install a filter and/or a racing mapping, for the motorcycle to run really well? Or would just installing a filter be enough? If necessary. Thank you very much!!
@LonestarMoto4 ай бұрын
After exhaust you will definitely need a tune, air filter is not necessary but does help power marginally
@richardburns97724 ай бұрын
Juiced up base model
@shaunsnyman51074 ай бұрын
Bmw1000rr best bike i ever owned
@Sanisani94 ай бұрын
My next investment 😊
@LonestarMoto3 ай бұрын
This one can be yours!! I am considering selling
@superbikesquadracer4 ай бұрын
What? You just spended 2000$ on a SC-project titanium exhuast and now you purchest a 6000$ 2/3 system?
@LonestarMoto4 ай бұрын
You are correct 👍
@tylerkimdura66904 ай бұрын
Saw you on Fastlane D! Great video.
@LonestarMoto4 ай бұрын
Awesome! Thank you! I hope you enjoy my channel.
@rquinn19144 ай бұрын
at 1:30 I realized I'm not doing this myself. congrats to you and thanks for the video
@LonestarMoto3 ай бұрын
Glad it helped you decide.
@MaverickM14 ай бұрын
That’s why I keep my god old S2R Monster. She has nearly 60k in odo and not a single issue so far. Only maintenance and it just works. Bikes/cars made after 2012 are rubbish.
@dandangsxr4 ай бұрын
I feel so sorry for you dude, 20k on a bike that's not working correctly, and it's a BMW, wow. I hate all the electrical gizmos new bikes have now, hence my 2002 gsxr, no rider aides to be seen, and if it does throw up an electrical fault, it's easy to repair 9 times out of 10. Old-school is the best school , hope you get the bike running 100%
@LonestarMoto3 ай бұрын
Thanks, the bike has been gone a while.
@steveseymour25224 ай бұрын
Sounds like they need to give you another bike
@LonestarMoto3 ай бұрын
Ha, it is gone to another home.
@yuchendai45534 ай бұрын
Thanks for teaching me😄
@LonestarMoto3 ай бұрын
My pleasure 😊
@Kalashnikovx895 ай бұрын
Could you record how that exhaust sounds outside where it doesn’t echo? It sounds angry. 😮