is the 0.5L for getting the effective length fix formula?

Very well explained 👍🏻

Thanks

It is very useful to studying in my subject Petrology ...Sir 👍

hi, for ideal truss the connection shall be pinned , but in steel trusses practically some times the connection are welded with gusset plates , so a welded connection will remain a ideal truss connection or it will have some rigidity and moment?, please explain

hi, for ideal truss the connection shall be pinned , but in steel trusses practically some times the connection are welded with gusset plates , so a welded connection will remain a ideal truss connection or it will have some rigidity and moment?, please explain

2040 length but not a cutting length 2040 and bend diduction 12D 12X8= 96mm 2040 - 96 = 1944 cutting length of Steel

The following explanation seems easier to understand: The Poisson Ratio of the dimensions of a material affected by a load is: PR = contraction / expansion For example: when tensile (pull) force stretches a material (e.g. taffy or steel), the material expands in the (i.e. longitudinal) direction of the applied force & simultaneously contracts in the (i.e. transverse) direction that is perpendicular to the applied force. So, if a piece of steel stretches 1" & contracts .3", then the PR = .3/1 = .3 Concrete is less elastic than steel, so it has a lower PR (e.g. PR = .02 / .1 = .2

thank you so much!!!

thought for beams was less. aprox 2%

Very informative

You describe small issue pease describe big issue like slope deflection and moment disrtibuation methode

if you have continuous beam what is solution

Good. Explination

Great explanation!! Thanks so much!! so there's no wastage for friction pile while end bearing pile has? why is that?

Thanks alot

what is the intro song?

Jazak Allah Sir💕

Very simple to understand & simple explanation❤

Sir Laminar layer and laminar flow are same Turbulent layer and turbulent flow are same i m in doubt.

Nice contents.

❤❤

thank you very very good

I am also civil engineer

So, nothing difference between story drift and interstory drift, right?

your answers are incorrect

Show real examples with the type of beams please

Thanks a lot man, great explanation. I've been looking for this stuff for long time.

❤

Pronunciation is very bad

Nice

show in diagram radius of gyration

you just saved me thank you

Need a new Title if this is for Cantileaver beam.

Hi sir newly iam construction my home slab and beams done by Reda mixed concrete length beams horizontal crack slab total crack and water leakage problem 19 days complete sir first day to right now complete water leakage problem sir

Best explanation

Its not 9.7 its 3.36 maybe sir didn't notice.....

😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

You have to devide 10÷0.1 + 1 : 101 And 6÷0.2+1 : 31 this is the correct answer

Teacher, what about if the ratio is equal to 12.

Thanks engineer👍

Thank u !!! This video is very helpful for me❤I’m a student of Civil Engineering Course right now.

Very helpful, thanks a lot. Im kindly requesting for assistance on this one please. On mechanics of machines, the topic is hoists and drums. A mine cage of mass 800kg is to be raised from a depth of 120m to ground level using a hoist drum of mass 120kg and radius of gyration 0.6m. The drum is 1.4m and the speed reduction gear ratio is 12:1 with an efficiency of 85%. A balance mass of 100kg is to be used. The mass and radius of gyration of the motor rotor are 20kg and 0.4m respectively. The mass of the hoisting rope is 1kg/m. Determine the power drawn from the hoisting motor if the velocity and acceleration of the cage at the start of its motion are 5m/s and 0.8m/s^2 respectively

❤❤❤😂

love the intro music

Thanks. Pretty informative.

Reference?

شكراً 👍

Thanks broo

Reinforcing steel?