Kar Kraftsman

Пікірлер

@TheRealkciRsnurB Ай бұрын

That gun is on sale today for $100 … so buy it or not?

@KarKraftsman Ай бұрын

For $100 that's a steal. It really is a good gun even though I like full metal guns just for everyday use because they hold up a little bit better if you're just spraying a couple things here and there it's absolutely worth it. Go for it

@linhma8114 2 ай бұрын

😂😂 it keep falling down buddy Kakakaka

@georgeherefordhereford3428 3 ай бұрын

You got a dent in the hood

@KarKraftsman 3 ай бұрын

Thanks for taking time out of your day to comment. I'm glad you like the video thanks for the view like and comment.

@Steve-cs3tt 3 ай бұрын

I noticed at the beginning you show the Black Widow in your hand with a 1.3 tip. They came with a 1.7 so can you help on where you received it ?? Thanks for the video. My Grand Prix is an 2008 and I was thinking about the front and rear bumpers and repainting those. Again Thanks, Steve

@KarKraftsman 3 ай бұрын

So when I first made the video they either came the 1.3 or the 1.7 tip I haven't gone back and looked recently to see if they still have those two options. The 1.7 tip would be more for primer or thicker paints, the 1.3 is for base coat and clear

@bassdaze 4 ай бұрын

poser ....

@KarKraftsman 4 ай бұрын

you wish you could be me

@epasternak4206 4 ай бұрын

Single stage is crap.

@fordnut4914 4 ай бұрын

I bought a husky paint gun it lays paint out as good as any of them

@KarKraftsman 4 ай бұрын

Idk those guns sucked for me, maybe I got some bad ones

@gustavogalindo4543 5 ай бұрын

That was very smooth spraying. I have a question, what is the reason of seeing bubbles? I sprayed like 10 coats of gloss polyurethane on a flat wood table and bubbles keep coming up? The temperature inside my garage is good 80f, is it the guns that I have or maybe i have to adjust the guns? I put the air pressure to 10, 20, 30, 40, 50psi and bubble keep coming up 😮

@patrickmccarron5059 5 ай бұрын

The video game porn music in the background adds a nice touch to this video.

@WilfredGreen-ov8bh 5 ай бұрын

Garbage paint.always striping

@Dr_Mike2 6 ай бұрын

Great video. A word of advice. When blowing, tacking or spraying, ALWAYS work from the air intake toward the exhaust. It keeps trash and overspray flowing in the right direction. Thanks for the black widow videos. I think I'm going to get one.

@stuartewoldt1513 6 ай бұрын

That came from a car?

@moistboy69 6 ай бұрын

Ebike

@KarKraftsman 6 ай бұрын

Scooter actually

@bigworm6635 6 ай бұрын

YOU GUYS should check out the WIDOW KILLER and THE BEAST and 3 others from American Dream Custom Paint. Much cheaper and better options. Trust me, they spray awesome, diff size tip kits for them, Patented X cut nozzle similar to Iwata.

@sll-tt6bj 7 ай бұрын

What was that brand

@KarKraftsman 7 ай бұрын

@chvydrptop 7 ай бұрын

Side question do you get a bit of visual distortion when you wear that air breather and you are painting?

@KarKraftsman 7 ай бұрын

Can't say I do or ever even noticed.

@frankmayo7306 7 ай бұрын

Any tips on cleaning / setting up new pump sprayer with wax and grease , it seems like that have grease in the pump sprayer tube

@joblo2299 8 ай бұрын

What color name

@Michael-ri2eh 8 ай бұрын

Great vlog. One of the new things to do is replace the factory grease and rebalance the buffer by adjusting the weight the accusehole is at the top 12 O'clock potion 🎉🎉🎉

@crxmovies19 9 ай бұрын

Nice Integra

@MikeOHanlon-o2v 9 ай бұрын

It's been 2 years since this video , has there been any issues using clear as primer ? might be helpful on blend panels with limited space to blend .

@KarKraftsman 9 ай бұрын

A lot of people use it intercoat for that. This piece had limited sun exposure but the overall finish is still fantastic.

@stewarteasterling6053 10 ай бұрын

hey Buddy do you know Pete my friend Pete your friend Pete

@leviscott8519 11 ай бұрын

Nice Paint style and technique my dude! The color seemed to match better after clear coating to me. It seemed to have a similar darker color shift on the passenger side fender as well. Saved by the flip flop paint. LOL

@robertcharlton1551 11 ай бұрын

Did you like or dislike the black widow? Does it come with a 1.4 or just a 1.3? What was you opinion of the fan and the whole gun ? Is it worth 200 dollars?

@DavidBrady-wf6qh Жыл бұрын

Great idea! I have all kinds of plastic buckets. I need too practice on my silvers. I have this gun and I feel it's worth the money.

@DavidBrady-wf6qh Жыл бұрын

White is right! Hides alot! GREAT JOB👍THANKS FOR THE VIDEO

@moe4772 Жыл бұрын

Guess what? I sprayed micro flake with intercoat, silvwr base with candy red and clear with the bw hte and it did all great!

@jameschuke4104 Жыл бұрын

Need to keep that trigger down all the time

@joanwilliams3221 Жыл бұрын

Where you been glad to see you back ! Hope to see more videos…

@moe4772 Жыл бұрын

We just sprayed some candy red with this same gun with silver metallic base and even silver micro flake with intercoat. NO ISSUES! WTF are you doing wrong??!? Bad gun maybe?

@KarKraftsman Жыл бұрын

I think it's more personal preference when it comes to base coat particularly. Outside the booth it looked fine, with polarized glasses you see some shadowing. I like the gun overall but for base I'd use something else.

@ronaldarndt7314 Жыл бұрын

Looking nice

@dennisjump8655 Жыл бұрын

Thanks for almost blowing my speakers. Was that necessary in an otherwise good video?

@KarKraftsman Жыл бұрын

I try and add thing to keep it interesting. Thanks for watching

@Dubblesteel Жыл бұрын

I'm glad somebody did a working review of this gun and not just a first time use of it. Looks good and it laid down the CC smooth.

@ozzstars_cars Жыл бұрын

Nice job man! Hoping I get similar results. Some days are good and some days aren't so good if you know what I mean? haha Take it easy. -Glen

@presentrlb Жыл бұрын

Very different thing, but I'm repainting a guitar with spray cans. Was looking great until I sprayed the clear flat on it, and the can spit out some larger drops here and there onto the guitar body, which I didn't realize until after I'd sprayed the whole coat. There are a dozen or so of the larger drops on the finish, each a few millimeters in diameter. Will this process work for that kind of thing too? Thanks.

@KarKraftsman Жыл бұрын

Spray can clear lays a lot thinner and is more susceptible to chemicals and staining. I would not recommend cab clear and buffing but it can be done. Sand with 2000 to 3000 and you can hand buff it from there. Next time for the clear coat I'd try and take it to a professional car painting place for them to apply. Much more durable and easily buffable.

@MikiaHeard Жыл бұрын

This was helpful (Thank you). What did you spray to apply the shiny clear coating (around the 9:52 mark)? I want to repair a taillight scratch using your techniques. I do not have a sprayer. Can I apply by hand to get the shiny effect?

@KarKraftsman Жыл бұрын

You can also polish the plastic instead of painting it with clear coat. The steps for polishing plastic is the same with polishing everything; wet sand starting with 1000 grit for hard scratches and progress to 1200 1500 2000 and 3000. To polish use regular buffing compounds and end it with a headlight or plastic polishing compound.

@SYLVIASGARAGE Жыл бұрын

What's the part number for the adapter for the 2.0 pps?

@rongamble9884 Жыл бұрын

This video is hilarious 😂

@shaneh2755 Жыл бұрын

Typical neon, the speedometer and odometer aren't working 😅

@atomskiMarsic Жыл бұрын

make hot car place with hairdryer

@garygillespie3629 Жыл бұрын

I'm getting ready to spray a 1972 442 and haven't painted in a couple decades. I'm going to paint Duracryl Viking Blue metallic lacquer and final coats of Duracryl High Performance lacquer. I wonder how lacquer will spray with either a HTLV or HTE spray gun. Anyone with experience. Enjoyed the video......

@KarKraftsman Жыл бұрын

Just set the guns up the way they want to be sprayed and you should have no problems! Best of luck

@mrfrank5757 Жыл бұрын

Good video, appreciate you showing your errors. I wondered when you were going to remove the air valve for cleaning, then saw it pop out when you blew air into the inlet. You didn’t seem to notice at first. I just bought that gun and may have learned the hard way there is a right and wrong way to install the air valve. I tightened the fluid nozzle (with the valve not properly seated) and now worry about how well it will work (my bad). It is not a Murphy proofed design and there are no markings on the air valve to designate up from down. Thanks for the tip about wearing gloves while sanding. Please use your influence to get HF to sell a repair kit for the Black Widow.

@JesseAkersKnives 8 ай бұрын

They fixed it. Now the air diffuser is just a disc that has text stating which side faces out. Pretty nice setup!

@MrMelvinkennedy1 Жыл бұрын

Nice. Im about to try slick sand for the first time this week

@sixassassin204 Жыл бұрын

@KarKraftsman Жыл бұрын

Do you use a grinding wheel offten?

@nathancollins5822 Жыл бұрын

What did you thin it with?

@markoliver9108 Жыл бұрын

You look familiar did you ever work at dent wizard?

@KarKraftsman Жыл бұрын

I did

@samanthawhite5448 Жыл бұрын

Love it

@samanthawhite5448 Жыл бұрын

How do I contact you

@koollee Жыл бұрын

Im better at bodywork than painting a whole car, tho ive done about 3. Im going to get back at it. Youve done what i call "cheater style" lol .. which is

@koollee Жыл бұрын

.. paint a section at a time. This is what i plan todo.. so i can have the whole car really wet when im done. The problem ive had was overspray dulling the previous sections. So ive planned to do it sections and let them fully dry for days even, b4 i do the next lol. Amateur-ish, i know.. but im sure i can get a really wet paint in the end.

@johnvinyard4420 Жыл бұрын

I just picked up the Black Widow to give it a try. I usually use my Devilbiss Pro Lite but trying this Black Widow for clear coat. I seem to be getting heavy orange peel spraying at 30PSI. Did you say you sprayed this car at 35 PSI? Any feedback is appreciated. Great video.

@alaskan6384 Жыл бұрын

Good job. I've been watching a lot of professional PDR videos but this one reminds me of how I would probably do it lol

Ең жақсы KZbin

Пікірлер