which iat did you use??

it's just a woman. What's so spectacular about it ?

Love this! I’m feeling your pain all these years later. I replaced the easy to reach hoses and still have blood stains all over the engine.

Listening to all of them and considering their respective prices, the Deity W.Lav Micro is absolutely phenomenal. In fact, it's unbelievable that it costs less than half of the other more expensive ones. Thanks for the video.

Hey buddy cool video. Quick question, how did you remove the #74 bulbs out of the HVAC. Did you completely rip out the bulb+ the bulb holder/housing? Then reconnect the cables into the LED housing ?

Oddly ChatGPT told me the SH7 is 1500nits

Dude thank you so much!!! I’ve looked everywhere all over the internet to figure out why my LED didn’t work. Now I know why!!! Thank you bro !!!!!

U r a liar

thank you!

@10:45 that's my garage life 😅

0:41 MIC-J044 $30 1:40 CL6 $99 (likely unavailable) 2:35 Diety W Lav Pro $100 4:17 Diety W Lav Micro $140 5:21 MKE2 $380

Hi, thanks for your long review video. We will forward your suggestions on BM5WR to the related department. About the disappointing point, we guess that you want to say that BM5WR can't do SDI IN to HDMI OUT, because BM5WR doesn't have HDMI OUT port. We also look forward to your new video after the Cinenorm OS is released~

A couple of notes: 1. Yes, I know the focus is terrible through most of this video. 2. The previous BM monitors did not have Wi-Fi. Only Bluetooth from the add on module. The WR has both Wi-Fi and Bluetooth built in. 3. Adding the record button "tool" to one of the four buttons on the top of the camera could be a great idea to add a physical record button. 4. I have since adjusted my zebras to have the high at IRE 96 and the low at IRE 5, which makes it useful. 5. The focus tracking DOES work through the monitor, but you have to make sure that it's selected on the camera before trying to use it on the monitor. Once you do select it, you will not have the option to change the focus size or type on the monitor. 6. Yes, I know this video is long and boring, but some people actually like this level of detail on things they're considering buying. 7. This is a truly unique monitor that does things that no other monitor can do. I'll probably do a follow up video once the CINENORM OS update is released for this monitor.

Nice review! Can you go into more detail about how to use the A-B focus pulling function? Thx.

Thank you for doing this. The real-world test makes all the difference.

junkyard panel for me

image overlay is good if the shot calls for a match cut or transition.

my thought .... they all sound very very similar.............

Finger banging! I'm in tears.

Hi. I randomly thought of you and was wondering how many miles your ND had now. Ok, bye.

Dielectric grease should help prevent corrosion on that broken connector if you live in an area where you think a sealed connection would be an advantage.

i appreciate the no bs approach.

Hello friend, I really need your help, yesterday I bought this monitor without knowing much about it, I thought it controlled my bmpcc 6k via bluetooth and that's it. It was a great disappointment when I saw that I was deceived, because on Amazon, in the photograph of this same monitor, it brought a photo of the antenna that came in the box. In short, I can't control my bmpcc6k via bluetooth, I tried connecting via cable and that didn't work either. How can I do to control by cable? Thank you very much and CONGRATULATIONS for your content.

I sent back the lights I bought because I thought they were damaged ! Now ima re order them and do this ! Thank you

Por favor en Español

How many yards of vinyl did you use?

So my question is can I use this with the red Komodo without the wireless control ? I know the WR version gives you that option, but If I just wanted to use the SDI to just be able to have a monitor for the Komodo can I do that with this monitor?

Great review! Any thoughts on an untreated (and echo-ey) room? Am considering the W.Lav Pro + 3.5mm adapter, perhaps combined with an AI-micro to tweak with the settings + have an interface that connects to my iPhone/Macbook straight away. It is omnidirectional however. Would that pose a problem and/or does that bring forward other consideration in your opinion?

Looks spot on thumb so no primer needed ??

As an owner of two defective 15.4" envy x360 laptops, I cannot recommend this product. I purchased my first in December, used it for about 8 weeks, and out of nowhere, the screen flipped upside down as if it was in tablet mode. I attempted to reboot it, but the computer never came back on. No LED indicators, no signs of life. Long story: Since it was still under warranty, I called the support center and spent about two hours on the phone before they asked me to send it to their service center for a repair. Two weeks later, I received it back, tried to turn it on, and nothing happened. It was as if the service center did nothing but forward it straight back to me. I sent it back a second time (after another 2 hour call). A week passed, and the tracking information showed that it had never been received. I called them, waited on the phone for the default hour or so, and was assured that they'd received it but the tracking information hadn't been updated. Three weeks passed, and the tracking information never showed received. And I hadn't received any update from HP. Once again, I spent an hour waiting to get someone on the phone, and I finally reached someone who spoke clear English. I asked what happened. The representative said he had "no visibility or contact" with the service center it was shipped to. I asked how it was possible their own service center couldn't contact the other service center. He said he didn't know but that it's always been like that. I received my laptop back about 10 days later in the same condition I'd sent it in the first two times. I got back on the phone explaining how I wouldn't send it in again and that I'd like a replacement or refund. They said they couldn't rebuild it but would send me a similar laptop. They sent me a refurb with slightly better specs. I received it today. Guess what happened when I tried to turn it on. Blank screen (I can't make this up). This replacement/refurb has a different problem than my original. My original shows no signs of life, whereas the replacement unit shows LED power indicators and makes boot noises. Short story: Due to my experience with HP, this product, their service center and their escalation department, I will say that I have no confidence in this company, so buyer beware. HP makes most of its profits from big companies: defense contractors and so forth. So a single individual like myself is not on their radar. If your product works, great. If not, good luck beating the odds!

Thanks for this!

Do you think that fx30 could do this in a usable manner?

I watched your video several times before I replaced my master brake cylinder on my 1990 Miata today. I still made a couple of mistakes. I forgot to keep the angle bolt loose when trying to thread it back and it was difficult. But the big question I have is the following: that lower angled connector, the really difficult one to thread back in, I was getting a leak through that one when pushing down on the brake pedal. In order to stop this leak, I had to tighten it beyond what I thought was a proper amount. Is that normal? oh by the way thanks for posting this video. It was quite entertaining. Here’s another question: I have not bled the brakes yet, and they feel fine, no longer mushy or going to the floor, so the cylinder was the issue. I already had new brake fluid in there, so I won’t be able to tell when the old fluid is out when bleeding. Scratching my head on that one

Capture image and Image overlay I use a lot when the productions has digital effects in post production.

having access to a brake fluid exchange machine makes this process 10x easier and you don’t have to worry about mixing the new stuff with the old stuff

And they say the Miata is a gay car.

is there any difference between the BM5 III & BM5 III WR? Is it solely the wireless control?

hello thanks for ur review. i buy this laptop (ryzen 7 4700u) on 2nd hand use, and its only 300$. great value with great build quality.

I had to borrow a broom from a nearby business once and shove it through an opening in the zip window to push the lock open.

0:38 wheres that area at?

What radiator did you go with and do you like it ?

Hope you don't have to replace that sensor

can i get signal from sdi out, If i Hdmi in

just, wow

When a 20 min job turns into a 2 hour job lmao

Points to ponder... ** hot glue ** Short sheet metal screw wrapped with Teflon tape ** Adhesive Caulk ** Liquid Nails ** Heat it and crimp it Just sayin...

You go to the ATEM setup app (installed with the ATEM) and you select the option to make the key not switch off with transition and problem solved.

I'm about to do this to my 97 and this is exactly the video I needed. We work so alike it was like watching a mirror. Thanks for doing this....6 years ago. LOL

hi tank you, I'm really glad you made this video, where did you got the new one,

Did Portrays ever do anything for you about that dead mark 2? Also, do you have full FIZ & record control through the usb control cable on your A7s3?