Creative Motorcycle Worx

Пікірлер

@kxyl_n 8 ай бұрын

wicked! good stuff dude, the o ring thing is really cool

@yrornoswal 8 ай бұрын

Thanks Kxyl. Appreciate the input.

@colinhall8998 9 ай бұрын

Who needs case hardening, it’s just a pain in the butt isn’t it 🤣🤣

@Jack-yp8re 10 ай бұрын

Thankyou for reply do u have any idea why it is seeping from the clutch arm

@yrornoswal 10 ай бұрын

Yes. There is a small seal there. They take a hammering from dirt that lies on top of the seal during clutch movement.

@yrornoswal 10 ай бұрын

Hi Jack. I am not sure. Most bikes have different mounting methods. If I was in your position I would disconnect the clutch cable and try to remove it like this. You have nothing to lose. Either it comes out or worst case it does not. Sorry I can not help you more.

@Jack-yp8re 10 ай бұрын

Can i remove this actuator arm on a pitbike(the same way) i have oil seeping from the actuator arm where it goes into the casing and was wondering if it will work on a pitbike

@Duffy46 11 ай бұрын

Dont use on parts that seal things where fuel passes, would just eat up the glue

@yrornoswal 11 ай бұрын

Yip, I should have said that. Thanks for the add in.

@yrornoswal 11 ай бұрын

Yes, you can. Good luk with the jb.

@Harun-w5s 11 ай бұрын

Good video I have the klr 600 b of the year 1985 Its the same? and can i change it from outside?

@briangilmore2256 Жыл бұрын

Thanks. Only place I could find a picture or video of what’s behind that seal. I think mine is good to go.

@jorgekanda7127 Жыл бұрын

Onde consigo comprar essa cola

@yrornoswal Жыл бұрын

É Supa-cola. Também conhecido como Cianoacrilato

@bernhardpi834 Жыл бұрын

Nice video! I have a problem, my actuator arm won’t fit back in, i tryed turning it but it won’t fit.. does anyone know what could it be? Or what should I do?

@yrornoswal Жыл бұрын

If you are sitting facing the clutch side cover, make sure the arm head where the cable goes in is pointing to your left shoulder. Push the shaft (actuating arm) down and start rotating it clockwise until it gets to it's normal position. If this does not work pls send me a video of where it is getting stuck so that I can figure out what is wrong for you. I will video me inserting one tomorrow and send it to you. Good luck.

@stevespanos75 Жыл бұрын

This is just what I needed to know, thank you for your video.

@superraptorproductions5452 Жыл бұрын

Please, share your ideas and more useful stuff like this.

@manborn Жыл бұрын

very nice, i like!

@learninglife8475 Жыл бұрын

Excellent Idea. Love it.

@viola17050 2 жыл бұрын

How do I contact you, I have Kawasaki KLR 650

@yrornoswal 2 жыл бұрын

My cell: 071 6868545

@mr2bmw 2 жыл бұрын

Is this better than the noco genius 1? Thanks.

@yrornoswal 2 жыл бұрын

Hi, I don't know the Noco Genius. Sorry.

@Matias-ez5dr 2 жыл бұрын

🙌 𝐩𝓻Ỗ𝓂Ø𝓈Ｍ

@yrornoswal 2 жыл бұрын

Sorry, don't read hieroglyphics.

@shannonspage9360 Жыл бұрын

Hopefully they got the parasite out before it laid her egg and damaged the hoopoe eggs.

@TangHattingh 2 жыл бұрын

Necessity.....the mother of all invention. Keep on back yard engineering Rawr.

@wernererikatheron3252 2 жыл бұрын

Dankie Rory, toe laai jy die video sommer op youtube ek wag vir hom op whatsapp. Vindingrykheid vat mens ver in Suid Afrika, goeie werk.

@GreaseAndGravel 2 жыл бұрын

Damn, Rory! That back pack luggage system is amazing!

@yrornoswal 2 жыл бұрын

Thanks. It worked very well for my wife and I when we went on a 3 week trip all around the Cape provinces dirt passes and back roads. Both of us fitted perfectly with all the luggage.

@yrornoswal 2 жыл бұрын

Unfortunately Sarge is no longer with us. Had an onboard fire and a lot of damage. Built another Mil-spec though called Major.

@GreaseAndGravel 2 жыл бұрын

@@yrornoswal I remember you told me about that trip. Francois here :)

@wernererikatheron3252 2 жыл бұрын

I can assist with a few farts after I ate bean soup👍🏻👍🏻👍🏻🤣🤣

@rjpeterson1 2 жыл бұрын

Thanks for sharing!

@justonetechnicaljustonetec7578 3 жыл бұрын

Good which bike part is sir

@yrornoswal 3 жыл бұрын

That was an intake boot for a 1982 Honda XR500R.

@justonetechnicaljustonetec7578 3 жыл бұрын

@@yrornoswal thanks for replying

@yrornoswal 3 жыл бұрын

Here is a link to the 3D file www.dropbox.com/s/w3h60n04i3b0x25/klr%20clutch%20dolly.stl?dl=0

@gp2862 3 жыл бұрын

I like it even before I liked it.

@andrewmummert5727 3 жыл бұрын

Thanks for the vid!

@johnfrizza681 3 жыл бұрын

Superglue does in fact cure in the presence of water eg. moisture in the air.

@yrornoswal 3 жыл бұрын

That is what I was trying to say. It is the absence of air that cures it. Hence it cures faster in water as there is no air there. I think we are both saying the same thing.

@johnfrizza681 3 жыл бұрын

@@yrornoswal No, sorry, it's not the lack of air (that would be anaerobic curing - which superglue is not) but rather water which cures it. Thats why when you stick it into water it accelerates the cure. But don't believe me - google isocyanate glues and how they cure. An informative and practical video BTW.

@yrornoswal 3 жыл бұрын

@@johnfrizza681, yup you right thanks.

@yrornoswal 3 жыл бұрын

Was not up for a fight. I put out videos to help others.

@Silver1080P 3 жыл бұрын

Good video, very straightforward.

@yrornoswal 4 жыл бұрын

I build and do the conversion myself.

@devingoodlet7634 4 жыл бұрын

Thanks for sharing, fantastic machine!!

@devingoodlet7634 4 жыл бұрын

FANTASTIC!!!! Where did you get your roller bearing cam?!?!?

@DarrellShannon 4 жыл бұрын

The 200 is such a great trail bike. Looks great!

@yrornoswal 4 жыл бұрын

Thanks for the compliment. Yup they are timeless. I must say I have a bigger demand for the 1981/2 XR500Rs though.

@jagjag0101 4 жыл бұрын

I can see why you wear those shoes.....well done

@markschwarzer4258 5 жыл бұрын

Supper cool

@72timhall 5 жыл бұрын

Very good meathod. Thankyou for sharing this

@wernererikatheron3252 5 жыл бұрын

Absolutely stunning job Rory.!

@wernererikatheron3252 5 жыл бұрын

Thank you Rory, it is valuable info.

@WheeliePete 5 жыл бұрын

You are correct. Since liquid won't compress, you are only compressing the volume of air space left above the oil. You have a much lower total volume of air under pressure that way. (Smaller bomb). Think about it this way, would you rather have a tiny little road bicycle tire pop at 100psi while you stand beside it filling it up, or a semi-truck tire going off next to you at 100psi....? One will scare you, the other could potentially kill you. Since the oil is below the air on a KLR650 when the seal pops out of the top of the fork leg, the air escapes first, a stream of oil is never going to come shooting out the top of the fork leg under pressure. Carry on.

@yrornoswal 5 жыл бұрын

Thanks so much Pete. Confirmed my train of thought on this idea. By the way like your handle (WheeliePete). Mine should be WheelieRory. Can't ride with both wheels on the ground. I made a set of stickers for my forks yesterday that say "This way Up" with an arrow pointing up. Cheers

@jvljn8903 5 жыл бұрын

Beautiful Rory, a real step into yesteryear :-) I must admit that on a lazy Saturday in SA I'm not convinced the latest and greatest bike brings the biggest smile factor, these machines can truly still be appreciated. Please keep resurrecting these classics to be enjoyed the way they were designed for. May you be blessed with continued ability.

@yrornoswal 5 жыл бұрын

Wow Jaques, thanks for those nice words. It's all about the passion.

@wernererikatheron3252 5 жыл бұрын

Great stuff Rory!!! Its high time that a South African bike specialist give expert opinion on the Klaar's! ;-)

@williedutoit3372 8 жыл бұрын

Oh man what a amazing to kids you have m8 , these are special moments you keep for life , i laughed my ass off when you sprayed her with mud

@MaRTinRidesOL 10 жыл бұрын

well, at least the front wheel got some ground time....lol.....

@MaRTinRidesOL 11 жыл бұрын

The Sarge still showing the younglings how its done...

@yrornoswal 11 жыл бұрын

The riders having all the fun were, Rory, Vince, Jason, Steve and Thys. Lots more fun and games to come.

@בראיןרוזובסקי 11 жыл бұрын

Great!

@בראיןרוזובסקי 11 жыл бұрын

Hi Rory, Dina Diamant here. Enjoyed seeing you on your wheels! Miss you!

@yrornoswal 12 жыл бұрын

What can I say Ruth? I have influenced my girls to. They both race off-road. It's in the blood!!! Really good to hear from you. Im going on an 8 day deployment for work but when Im back will get in contact. Send regards that side. Cheers. ;-)

@ruthosborne1378 12 жыл бұрын

Very cool, Rory. Love your toys, hey? Keep living wild :-)

@ryder2shae 13 жыл бұрын

Awesome guys...its good to see the heavy girl takin some serious air...

@philipmarx 14 жыл бұрын

Ek laaik dit kwaai !!!

Ең жақсы KZbin

Пікірлер