The Shredist

Пікірлер

@BigLukey16 2 күн бұрын

I have looked through all of your videos trying to find where you got your grille and what headlights you installed. Any help would be appreciated!

@cortonolver5276 5 күн бұрын

What about the vacuum hose?? Did yours line back up? Or did you just leave it off? I can’t figure it out

@fungert 6 күн бұрын

Next time you need to heat a piece of metal, don't heat while the area you need to bend is mounted in the vice jaw(heat sink). The heat is not concentrated in the metal you are working but absorbed by the vice. Heat the metal where it is not touching a heat sink then move it into the vice for bending.

@jamesfoster9256 7 күн бұрын

Well, I know this video is a couple of years old. Do you do this for a hobby buy and resell because well I’m not be interested

@jedisentinel1499 9 күн бұрын

Haha! Exactly the video I was looking for. Trying to decide between the Tyaughton or the ESD. Better yet you tested it at Beacon hill in my hometown!

@NoOneIsGoingToSaveYou 10 күн бұрын

Had my gall bladder removed in 2010 what a mistake there are alternative measures that most doctors will not discuss. Ox Bile, Tudca and fasting. too late now though

@mihangman73 14 күн бұрын

Did you need a steering gear extender?

@CarlosGonzalez-km9xr 22 күн бұрын

It’d be great if those could be dimmed.

@Ratpackapunch 22 күн бұрын

Nice

@BigZaddy2112 29 күн бұрын

I will be removing my NVG136 transfer case today. This video is exactly what I needed! I'm not doing the NP233C swap.....I'm replacing, bearings, seals, case saver, shift actuator, bushing, etc,. Why? I live in Colorado and this vehicle performs very well in the snow as is! Thanks for the clear and concise instructions!

@MrJwc1234 Ай бұрын

Just ordered my frame. What's the mm fork suspension do you run. I have a 120mm with that be enough?

@Space-br1pc Ай бұрын

ur wifes a badie

@Space-br1pc Ай бұрын

lol scruffy is a sick name, love Futurama, was my childhood, anyway I got a 1998 Astro (same year I was born) really appreciate you making these videos, it's been a rocky road so far, tis my third van xD other two were write offs

@W4ltzzzz Ай бұрын

Where did you go!! I loved watching all your videos but you haven't posted for a while. Hope your doing well

@Charon58 Ай бұрын

Two questions. Does this give high and low range? And, can you use manual lock hubs with this set to isolate the front drive system with this?

@mosquitofleetfishing6599 Ай бұрын

Just rode this park today. It’s dusty as can be. Speed I’d definitely your friend here. Over thinking will get you in a bind on any of the tech trails

@prestonlemen1581 Ай бұрын

Man, you'd have to see what they've done to the trails here now.

@davidpatrick1813 Ай бұрын

Will check for updtes

@davidpatrick1813 Ай бұрын

Thanks. I was a mechanic for decades and hands were injured. They easily hurt. Docs were saying it is in my head and I can’t keep working… fools. I can’t regardless if I want to. I would like to save this video link that shows a search on the surface of what we need as a mechanic, hand wise. I used garden rubber pads 100% of the time when getting up and down and knees are still good. I wore cheepo gloves and fingers get use to touch through them. I hope this helps. Pat

@nesbitttom Ай бұрын

GOOD JOB 1 FOR THE ALGARITHUM

@flowstateofmind Ай бұрын

That rake is definitely underrated here. If you don't own a Mc Leod or a good machete the rake can do it all!

@WKF3 2 ай бұрын

#WhereIsScruffy

@SheepDoggy68 2 ай бұрын

On your Troybilt tiller the bolt on the shift handle needs to be tightened up a bit if it’s moving on its own and dropping into reverse! Also the spring that keeps the reverse from contacting the pulley is likely missing or weak!

@Albisriede 2 ай бұрын

WOW! Great explanations. Thank you.

@kevinmurray3954 2 ай бұрын

Is Scruffy dead? 🥺

@AntoineChoueryArcentales 2 ай бұрын

I recently ser the Spire alloy with a Dvo Jade X as well! How much do you weigh? How many pounds spring are you riding and what is the bladder pressure you use? Please let me know. I am a bit lost and struggle to get it right.

@applicablerobot 2 ай бұрын

It's cool to see lower atomic before the clear cut, the step up was probably spicier with the tree right next to it.

@walnut_trail_farm 2 ай бұрын

Awesome! What wheels are those?

@bobthebuilder201 2 ай бұрын

Why no new vids? I hope all is good.

@bobthebuilder201 2 ай бұрын

Thiis is the BEST easiest to follow video on this.

@pacora07 2 ай бұрын

I like those tires.. what size are they?

@dougjohns5115 2 ай бұрын

Idiots at GM that thought welding thier doors to the vehicle is a good idea (all thier vans are the same) should be made to watch this...for those of us that do not have a welder it's an issue.

@blackspruceroutes 2 ай бұрын

Hi! Nice work! Did you have to install longer shocks since you lifted 2 inches?? Thanks!!!

@diyanddone 2 ай бұрын

The “Pulaski” in this video is actually a cutter mattock. Pulaskis have a smaller hoe coupled with an true axe blade opposite. Pulaskis are also distinguished by using a narrow axe handle, whereas the mattock has a thicker rounded handle.

@trailjockeytj6160 3 ай бұрын

Your Pawlowski is weird! I have a regular axhead with a 2 inch wide Mattoc that’s about 3 inches long. That Matic looks more like what you see on a pic Mattoc.

@thewormholeproductionsgrou3433 3 ай бұрын

Got to do this trail this weekend. So damn fun.

@W4ltzzzz 3 ай бұрын

Now up in North Idaho theres a trail named ExtraTerrestrial and it's a great black diamondback jump flow trail which is a lot of fun. Just thought I would give a suggestion since you where talking about there not being many trails like Mohawk in North Idaho

@jeffhusband243 3 ай бұрын

What insulation did you go with? How did that affect the noise. Wonder if adding it to the floor would make a bigger impact

@JuanEmilioDiazRivera 3 ай бұрын

Do you live in kolowna? In British Colombia? That looks a lot like it especially the ski runs and the lake

@alvarorios5474 3 ай бұрын

👍

@rustynutz7158 3 ай бұрын

.22 caliber ramshot pops the pins out. Seen a guy on KZbin do it. It works. I did my express van doors and am now doing my rear safari doors. Leaves paint untouched. ✌️🇺🇸