Hello @cressmanmusic. During the initial connection of the units you are prompted to select a location for your Deco unit. Selecting the custom option allows you to rename the unit to one of your own choosing. Thanks for your question, hope this helps.

Hi @chr1srugby, the settings on these lights are adjusted prior to fitting and therefore not compatible with the BG Home app. Hope this helps, thanks for your question.

Hello @4U2NV4EVA Only one of the units requires a direct connection to the modem, all other units connect to this unit wirelessly. Thanks for your question, hope this helps.

Hello @dell74877, naming of the units allows easy identification and management of the network. With advanced Deco Mesh Technology, units work together to form a unified network with a single network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds. Hope this helps, thanks for your question.

Hi @SamWalker1982, thanks for your question. As per manufacturers instructions we only recommend using this product where the joint depth is a minimum of 20mm and width is a minimum of 5mm

Hi @richardhardman8346, thanks for your question, As per manufacturers recommendations, wet thoroughly the entire area where Sika FastFix® All Weather is going to be applied with water. This includes not only the joints, but also the entire slabs. Allow any standing water to drain before Sika FastFix® All Weather is applied. Washing down slabs after using should not be required if the area is prepared prior to application and may also extend the curing times of the product, hope this helps.

Hi @benj0211 this product is not suitable for use with porcelain tiles as per manufacturers instructions, hope this helps, thanks for your question.

Hi @7470774707 we are unable to comment on specific gardens due to factors such as drainage. We can confirm that water will pass through this product to the surface below. Hope this helps. Thanks for your question.

Hi @PinkRainbowSunshine a full battery charge will last up to 72 hours with sleep mode on and up to 12 hours with sleep mode off. Hope this helps, thanks for your question.

Hi @stringsgb8833, we recommend following the manufacturers instructions and wetting the slabs prior to application of this product, hope this helps

Hello @QasimSafraz24, the hatch door itself is not included in the kit, thanks for your question