21 күн бұрын
21 күн бұрын
21 күн бұрын
21 күн бұрын
21 күн бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
3 ай бұрын
3 ай бұрын
4 ай бұрын
5 ай бұрын
5 ай бұрын
5 ай бұрын
5 ай бұрын
6 ай бұрын
6 ай бұрын
6 ай бұрын
6 ай бұрын
6 ай бұрын
Пікірлер
@DianeSaunders-r1h 2 сағат бұрын
Hi Mark is kerf been adjusted for? Do you pre spray the wood before assembling?
@BigBlueLaserDesigns Сағат бұрын
Hi! No, you would adjust for kerf if you want to. We always include the original slot size in our listings. We paint after cutting and before assembly.
@BrendaDavis-1963 5 күн бұрын
So I have a 5 W laser is the power is 90% max so does that mean I can go higher than 90% I’m new so I don’t know
@Hildebrantmade 5 күн бұрын
Haven’t seen you pop up in a minute
@theoilykrafter 6 күн бұрын
sorry, had to catch the replay! Had another meeting to go attend
@hldeliadamn 6 күн бұрын
Damn, I missed it.
@karyborrero3344 6 күн бұрын
Hi Blake!
@yvonnedare6124 7 күн бұрын
This has helped me immensely today! Thank you so much for this. I am new to using a laser and was not quite understanding what settings I needed to change to get the exact effect I am looking for. I totally appreciate that you put it in text along with describing it. Sometimes I need a visual like that for it to sink in!
@BigBlueLaserDesigns 7 күн бұрын
I am so glad I could help!
@akr62 16 күн бұрын
I cannot get that belt back on! I've tried numerous times. It seems I'll need to unloosen the wheel. Maybe the belt is too tight to do it your way? UPDATE: I ended up placing my thumb below the belt and pushed the belt UP with my thumb as I slid the gantry towards the corner. It popped on! YAY!
@LouisaSamayoajerez 16 күн бұрын
Love it!!! ❤ can’t wait! Thank you!!!
@suzyq263 17 күн бұрын
Thank you for your video. I am engraving my daughters sweet 16 invitations and the engraving was so light, I couldnt read it and also not cutting deep enough plus burning the edges too much. Im going to give it another try. Im a newbie
@BigBlueLaserDesigns 17 күн бұрын
Happy to help if you need a hand. Feel free to message me on FB at facebook.com/bigbluelaserdesigns.
@adelaidanilo3362 18 күн бұрын
Where have you been all my life!!! OMG!!! When you mean Short you mean Short! awesome! I'm subscribing.
@Marmes80 23 күн бұрын
I saw a crafter couple do something like this for Halloween and Christmas. Cool idea!
@sammig.9770 24 күн бұрын
This is a cool project!
@BigBlueLaserDesigns 23 күн бұрын
Thank you! We love making things like this!
@beckyscheffel4744 24 күн бұрын
You got my attention when you put Elvish dice tower in the title because I'm a huge Elvis fan. Looks awesome. ❤
@lindanewton71 24 күн бұрын
Thank you
@AlivePixelCreates Ай бұрын
love the T-shirt lol
@sammig.9770 Ай бұрын
Is there a formula or rule of thumb of how to size your base in relation to size of what's going on the base?
@BigBlueLaserDesigns Ай бұрын
I never have used one myself. I just make the size that makes sense to me.
@ChristineD-fu9wj Ай бұрын
Great video. Just wish you would have used a lighter wood or changed line color so we could see better.
@BigBlueLaserDesigns Ай бұрын
Thanks! The video was made for one person who asked about this, so I decided to share it with everyone. Normally I’d have spent more time on the production side, but since it was initially just for them, I didn’t do that.
@chadtuggle9814 Ай бұрын
Exactly what I came to say
@BigBlueLaserDesigns Ай бұрын
I made it for a specific person with no intention to share it with everyone, so production wasn’t important.
@RamyaAnanthapalli Ай бұрын
Thank You for the Clear Instructional Video. Will definitely try this.
@lightbeambystacee Ай бұрын
Never realized making a sign was that simple 😂 thank you for the description steps.
@BigBlueLaserDesigns Ай бұрын
You’re welcome! Glad I could help!
@karenhadden4980 Ай бұрын
Very cool Mark! Now all you need is a TARDIS one! :)
@EmilyHyburg Ай бұрын
love this great job cannot wait to make these!
@phillygurl2000 Ай бұрын
I love this!❤
@Sunny-qs5gf Ай бұрын
Very cool for the sci fi fan
@moi-td3bq 2 ай бұрын
thanks . especially for the hole you created at the end...
@BigBlueLaserDesigns 2 ай бұрын
Glad it helped!
@Blazelaserengraving 2 ай бұрын
Thanks for sharing, I understand the concept, and it's great. I'm just stuck on finding how to use this regarding the material. Would I create a rectangle shape and add it to the part I want to cut to get the exact size as the slot sizer? What I'm trying to do is be able to stretch bigger or make the file smaller (aka SVG file), since lot of premade designs are already made with the area of cut and all that.
@TinyLuxuryCompany 2 ай бұрын
🎉🎉Thank you for the great information
@jeffcampbell1302 2 ай бұрын
I have an XTool S1 laser. I want to do the letter projects, but how am I going to deal with the acrylic using a diode laser?
@BigBlueLaserDesigns 2 ай бұрын
The best approach we’ve seen is to connect with someone in your area with a CO2 laser who can cut the acrylic for you. There are user groups all over the US, so there’s probably one near you.
@ushmasohail 2 ай бұрын
Thanks a lot! This one was by far the most simple tutorial I could find. I owe you a subscribe!
@adelaidanilo3362 18 күн бұрын
for Real!!! I have looked at so many and nothing. Too confusing, too much click here, click there.
@SuePelletier-de8iq 2 ай бұрын
That was Awesome. Thank you for this Tip. Brand new to this and i needed an explanation about speed and power.
@BigBlueLaserDesigns 2 ай бұрын
So glad I could help!
@Pixelkabinett 2 ай бұрын
My god, I tried to do this all day and couldn't figure out how its done... Thanks a lot!
@sammig.9770 2 ай бұрын
These are adorable! You have such great projects. I just got a co2 laser this weekend and I'm so excited to try many of your designs.
@stephaniespivey8951 2 ай бұрын
Newbie here again. Any idea how to convert mm/m to mm/s regarding speed? (I'm assuming that's millimeter per minute v. millimeter per second.)
@BigBlueLaserDesigns 2 ай бұрын
Each software should have that option built in. What are you using?
@stephaniespivey8951 2 ай бұрын
xTool Creative Space. I just found the answer: I divide the mm/m by 60 to convert to mm/s!
@stephaniespivey8951 2 ай бұрын
I wish I found your video Day 2 of trying to learn my xTool laser as I'm a newbie. Someone finally took pity on me and provided a chart that's spot on with what you just covered. Great job!
@jieli2412 2 ай бұрын
Can you share the chart with me too?
@lornabrannum6542 3 ай бұрын
Love this frame!
@rickpouley7561 3 ай бұрын
Looking great.. Looking forward to making these...
@owatagi 3 ай бұрын
Thanks for the creativity Mark. I have a question though. I’m trying to do an engrave on the word “DAD”. I want to use a thick font, and only engrave the stroke - leaving it hollow. When I go to engrave, it’s automatic fills in causing a long engrave time. Would you know how to keep this from happening? Thanks
@BigBlueLaserDesigns 3 ай бұрын
Yup! Depending on the program you’re using it’s called different things. In illustrator you need to convert the stroke to a shape or path. Once you do that you can engrave just that.
@owatagi 3 ай бұрын
Thanks. I’ll give it a try.
@Ochw 3 ай бұрын
can you do the files so they can be 3d printed?
@patriciaoneal8222 3 ай бұрын
I love these. I needed something like this, but I don’t have a laser cutter. I just traced the pattern on the material and used my scroll saw to cut them out. Not perfect but they will work. Not sure if I should paint them or seal them.
@BigBlueLaserDesigns 3 ай бұрын
You could always get someone in the laser community to cut and mail you some. I’d happily do that just for the cost of postage. Since these are meant to get messy, no need to finish them. They just get thrown away.
@sammig.9770 3 ай бұрын
I love this idea! Really nice!
@MsSpunkydee 3 ай бұрын
I can’t seem to get my belt tight enough. What should I do? 😢
@BigBlueLaserDesigns 3 ай бұрын
I assume you loosened it to get the belt off? Once you get it tightened again, I don’t recommend loosening it. Here are the instructions Glowforge provides for tightening it. support.glowforge.com/hc/en-us/articles/360054011474-Adjust-the-Carriage-Plate-Belt-Tension
@rickpouley7561 3 ай бұрын
Looks Great!!
@LaserGranny 3 ай бұрын
Thanks, Mark! Love this award!
@reneechapman3270 3 ай бұрын
Did you say what thickness for the clear acrylic circle? Same 1/4”?
@BigBlueLaserDesigns 3 ай бұрын
Sure did! 1/4”. It’s also in the description. 🎉❤️
@scrappymama1 3 ай бұрын
very helpful, thank you!
@emanuelcastilla7022 3 ай бұрын
Excelent
@michellearchambault6555 4 ай бұрын
Great video! Thank you all!
@LaserLady 4 ай бұрын
I have so much fancy paper laying around for project pic backgrounds. I should laser them! Super inspiring! PS. I LOVE your background!
@AusWorkshop 4 ай бұрын
Interesting. Thank you. I'm still yet to get my laser set up. But I've been using a cnc router for years now. If only there was more time in the day!
@BigBlueLaserDesigns 4 ай бұрын
CNCs are so cool! I’d love to see some of the things you’ve made.
@AusWorkshop 4 ай бұрын
@@BigBlueLaserDesigns yep, sure is fun to play with. Check out my latest video if you like. I've only just started a channel. One of the Man Cave signs i made recently was actually a file I purchased from you a while back. I used a stain on pine for that one then routed through it. I'll make a video of it one day then provide a link back to your vector file. Worked really well. Thanks for providing such great content.