4 ай бұрын
6 ай бұрын
10 ай бұрын
11 ай бұрын
Жыл бұрын
Пікірлер
@georgeclontd4984 9 сағат бұрын
Hi. Its always good to see a channel like this. May I ask where you obtained this rifle? Thanks.
@jimbaird8976 Күн бұрын
Very well presented. Interesting and informative. Liked and subscribed. Look forward to more content.
@belindaf70 2 күн бұрын
Has anybody tried putting it in a spray bottle?
@wamindustries Күн бұрын
I haven't... I know a few people have commented about they were going to try it. I think if you use it in a sprayer or spay bottle it may ruin it if you don't find a way to clean it out well as the silicone may restrict or fill the small holes in the sprayer.
@thegreatchickenoverlord5976 3 күн бұрын
What was the condition of the bore? Was considering using one of these barrels to rebarrel a carcano to 7.62x39
@wamindustries 3 күн бұрын
The bore was excellent... though there are two 1/4inch holes in the chamber
@thegreatchickenoverlord5976 3 күн бұрын
@wamindustries Thats fine. For the conversion you actually just cut the threads off entirely
@MarioCai-l6b 5 күн бұрын
Wow! Glad to find a quality channel that is so unrecognized
@wamindustries 5 күн бұрын
Thanks for the encouragement!!
@mauriceupp9381 5 күн бұрын
As far as the wax goes I just watched a video which I trust and he used 2 lb of wax and two cups of mineral oil melted it together let it cool and applied it with a warm disposable iron and it doesn't crack off and start leaking or cause the fabric to break it stays soft in cold weather as well as hot
@wamindustries 5 күн бұрын
Hmm... I've never tried that. Assuming the oil is primarily to act as a carrier? My main concern is making it even more flammable
@mauriceupp9381 5 күн бұрын
@@wamindustries it's softens the wax so that it doesn't crack and fall off after it cools and it stays in the cloth flammable is not a problem it was hard to catch fire with Sparks but just like the one you're putting wax in it will burn like a candle wick
@arcadepiano 14 күн бұрын
i don't get why many tents has no floor properly sew. it's incomplete. bugs gets in.
@wamindustries 12 күн бұрын
There are a wide range of ratings not to include the floor, from weight (tent without the floor is over 50 lbs), ease of set up (frame would be a little more difficult to set up), ease of changing out the floor if ans when it wears out.
@TimeTravelingBirds 14 күн бұрын
Mineral oil is the main one recommended, or vaseline
@wamindustries 12 күн бұрын
Hmm... the Vaseline worked... haven't tried the mineral oil yet. Vaseline though leaves a residue
@jameskleist9176 15 күн бұрын
that was interesting. 😀👍 I gave you a thumbs up as well. Plus I saw you had some muzzleloaders in your tent. Do you hunt with them? Or do you go to rendezvous to try to out shoot in competition? I have done both myself? In any case, as my Dad use to say shoot straight.
@wamindustries 12 күн бұрын
Thanks! I actually do reenacting, so that's the reason... if I remember right on the floor was a Lee Enfield no1 mk3 and a k98k.
@johnc1280 17 күн бұрын
Can you use wood stain over this method?
@wamindustries 12 күн бұрын
Yes if you include enough wood dust... if your ratio is off it won't hold the stain as well... though you need to sand the mixture once it's dry before staining
@johnc1280 11 күн бұрын
@@wamindustries thank you. Equal parts ratio? More dust than glue? Thanks again!
@wamindustries 11 күн бұрын
@@johnc1280 it's not as much an exact ratio because not all saw dust is equal. You need just enough to bind the saw dust together and to bind it to the wood that your filling... too much saw dust it crumbles... too much glue it's runny.
@lamefart 24 күн бұрын
First you take your cock and place it inside the bottle. Then you squirt your white liquid inside... Wait-
@jason9608 Ай бұрын
We use pressed vinyl cutouts as a gasket. Works fine
@wamindustries Ай бұрын
Hmm... how did you use the vinyl... did you put it between the canvas layer or between canvas and the grommet?
@jason9608 Ай бұрын
@@wamindustries grommet in anvil,material,gasket material,grommet top...bang it! Says my boss
@zacklabs7192 Ай бұрын
Nice man keep it up
@wamindustries Ай бұрын
Thanks!! I have more footage I am working on getting out for KZbin shorts, so stay tuned!!!
@zacklabs7192 Ай бұрын
@@wamindustries will do man
@wubba_chicken Ай бұрын
No measurements just rough guess wtf how is this any good to anyone to rough guess everything
@wamindustries Ай бұрын
Yup... the closest I can give you at this point is the consistency... I believe somewhere around the consistency of maple syrup... I haven't made this for a few years and I just aimed for the consistency and added more as was needed.
@carolseeley7376 Ай бұрын
Like your sewing machine looks a lot like mine. I am impressed that it sews such heavy material
@wamindustries Ай бұрын
Thanks!! It's actually my wife's... It continues to surprise me!
@amyreaves8054 Ай бұрын
Thank you!
@blossomthymehomestead6176 Ай бұрын
How did the paraffin sealed seams work during the storms? Did you have any of those seams at the tent top?
@wamindustries Ай бұрын
Good question! Our seams that were sealed with the wax didn't leak at all. We didn't add any seams beyond what the canvas came with at the ridge (we added seams for the door which went up to the ridge and the horizontal seams that formed the drip edge that the poles connected into). It held up to a severe wind and rain and it stood strong and kept us and our gear dry. Wind was somewhere between 20 and 30mph.
@gangstajohnny Ай бұрын
huh. intriguing
@dawnamorgan7364 Ай бұрын
I wish that you would show how to actually put the canvas tent up. I have not seen a canvas cabin tent in real life and would like to get or make one, but it would be necessary to know how to put it up as a single person doing it. Thank you. I have enjoyed these canvas videos.
@wamindustries Ай бұрын
Thanks for the feedback!!! Weather permitting I'll work on filming the setup process
@dawnamorgan7364 Ай бұрын
@@wamindustries You are welcome. And Thank you! I will be waiting to see it.
@gun_toting_lefty Ай бұрын
I JUST installed one of those 2 legged AC brackets then just bumped into this video. I could've built that! Duh!!!
@wamindustries Ай бұрын
Yeah I think we all have moments like that. Hey, maybe I'll give you an idea for a future project.
@dmitryk754 2 ай бұрын
RH-34 by PAL. I don’t think that’s a kabar.
@wamindustries Ай бұрын
I looked up that knife you mentioned... it looks close. I'll have to look at the stamping again, they are very faint.
@smolpener7430 2 ай бұрын
I was taught to use my finger.
@wamindustries 2 ай бұрын
Finger works ok... not as consistent and it heats up... I sometimes will use my finger especially in tight places. Finger would be better if you don't have the same radius that matches... it's though harder physically for the finger and hand
@MacedonianEmpire_ 2 ай бұрын
❤
@redeye1978 2 ай бұрын
Hey I know that one in the Bennie, saw a picture of him in the post office
@wamindustries 2 ай бұрын
Lol... I shared the comment with him.
@redeye1978 2 ай бұрын
@@wamindustries good he deserves it! 😂.. I’m his dadio Dan
@DaskaiserreichNet78 2 ай бұрын
I would also like to remind people to plug the Fridge back in after you had to unplug it for some reason. Just double chek because your fridge is supposed to be cold al the time.
@wamindustries 2 ай бұрын
Lol.... so true... and yet the opposite problem!!
@Lizardfiz12 2 ай бұрын
i think the problem that we should be addressing is WHY hot glue guns dont have some kind of on/off switch???????
@wamindustries 2 ай бұрын
I think your onto something there!!! This has to be a common problem.
@cxnnxdx4575 2 ай бұрын
find an extension cord with a pedal and atleast two plug sockets. one for a hot glue gun and the other for a light. if the lights on, it’s hot. can’t forget something like that
@HeavenLeahSky 2 ай бұрын
That's actually an awesome tip good on you
@wamindustries 2 ай бұрын
Like a foot pedal? Interesting idea with the light.
@HeavenLeahSky 2 ай бұрын
@wamindustries it's doesn't even have to be fancy. Plenty of multi outlet extension cords have switches on them. Just mount them on a wall or somewhere easily reachable. Having a visual check that your work station is off is super smart =)
@cxnnxdx4575 2 ай бұрын
@@wamindustries exactly, i didnt do the best job explaining it
@UnearthCreations 2 ай бұрын
🤓 "erm actually" is what that voice gives off.
@Keith-c3r 2 ай бұрын
Sad just sad
@wamindustries 2 ай бұрын
Lol... yes, I couldn't believe I left and forgot to unplug it!
@surronzak8154 2 ай бұрын
I have this one and the puller, the BD70 for nails head that stick out but not the tip
@wamindustries 2 ай бұрын
I just googled that nail puller... I'm wondering if it's easier or harder to use... guess if you could get the nail head up enough it might require less disassembly of wooden item to get the nails out. Thanks for sharing! I wasn't aware of that type of pneumatic nail puller
@bearpuf 2 ай бұрын
The immediate issue I see is placing the air conditioner on a vinyl window altogther. Warpage or separation of the window frame can occur from the weight of AC unit. Vinyl windows are simply not made to carry that weight. That becomes a severe issue if there is a cavity between the bottom frame of the vinyl window and the wooden sill it is sitting. The best advice I can offer is to build a wooden cradle that will be supported by the inside and outside sils. The AC unit sits on top of the cradle and damaging the window frame becomes a non-issue. In making the cradle it should be angled 4 to 5 degrees downward towards the outside for water run off.
@wamindustries 2 ай бұрын
Thanks for the idea!
@cptmcdouble9481 3 ай бұрын
i dislike the video for that
@briancernic 3 ай бұрын
Awesome to see folks taking the iniative to fix their gear! Its a shame that tabbed cr2450s are a bit harder to find than other sizes (outside of the 2450hr that are more expensive because of their heat rating). One thing that may save you hassle in the future is soldering a 2045 holder to the board instead of those leads. Itll let you swap out the battery quickly in the future. Great video, thanks!
@wamindustries 3 ай бұрын
I like that idea! Do you know if they make a low profile battery holder? Inside the plastic body there's maybe 3/16 of an inch of space... I don't think the battery holders I have seen would fit... though could possibly make a custom battery holder in the future.
@briancernic 3 ай бұрын
@@wamindustriesOoh, that's definitely a tight fit. Probably not going to find one that low profile unfortunately, but you never know!
@wamindustries 3 ай бұрын
@briancernic makes sense... thanks for the idea!
@IvanDorozhkin 3 ай бұрын
You can make rounded big stamp, not a flat surface: =[)
@wamindustries 3 ай бұрын
Hmm... not quite sure what you mean by a rounded stamp... could you explain it more?
@IvanDorozhkin 3 ай бұрын
@@wamindustries I made a picture of it: =[) 😊 That types of stamp "printing" like a wheel - from one side to another by rolling on the paper
@blossomthymehomestead6176 3 ай бұрын
agree -important to repair vs buy new
@wamindustries 3 ай бұрын
It's enjoyable and rewarding!!
@snik2pl 3 ай бұрын
It's a pity you didn't solder the battery. For something to happen you would have to overheat the batteries a lot
@wamindustries 3 ай бұрын
Oh... thanks for that feedback!! I probably should have still given it a try. So the people experiencing the exploding batteries must have been leaving their iron on the battery for an extended period???
@snik2pl 3 ай бұрын
@@wamindustriesSoldering the wire to the battery may heat it up. if the batteries have welded legs that you solder to, then the risk is negligible. Sorry, I didn't notice, the old battery has legs and the new one doesn't. I was watching in the background while doing other things. Good thing you didn't solder.😊
@wamindustries 3 ай бұрын
@snik2pl thanks for the clarification... hey I watch KZbin often the same way... doing something at the same time so I totally understand
@kaseyflanders3510 3 ай бұрын
What a joke
@Hollows_over_balls 3 ай бұрын
Lit
@SlowExpensive 3 ай бұрын
What year was the drill mfg
@wamindustries 3 ай бұрын
Hmm... I'm not sure. We have had it for around 6 or more years. I didn't see a date on it. I'm actually in my shop cleaning it again
@danonroof 3 ай бұрын
If your bandsaw is uglier than a table saw then you may want to figure that out...
@wamindustries 3 ай бұрын
Lol
@jaked5651 3 ай бұрын
Would be great for the down and dirty board and baton I want to do on my barn
@wamindustries 3 ай бұрын
That sounds like an interesting project!!!
@PeterRattenbury 3 ай бұрын
What a load of padding. 16 mins of video, and maybe 4 mins of info
@MisterJokerWF 3 ай бұрын
Shakin like bacon my boi be careful
@wamindustries 3 ай бұрын
?
@Gowithdeath 3 ай бұрын
Drill press a basic tool?
@DrLexus 3 ай бұрын
More basic than a mill you can get one for cheap used and throw it on a workbench
@wamindustries 3 ай бұрын
Lol... My thoughts as well! Still, A hand drill could be used instead... Though that would be harder.
@wamindustries 3 ай бұрын
Lol... Basic turns out to be a relative term I guess. Anyways, a hand drill could be used instead of a drill press though that would take more work.
@ruthhancock3190 3 ай бұрын
I can’t believe he thought of that. That looks like an easier way to cut metal at home.
@ruthhancock3190 3 ай бұрын
Wow, that was so interesting. Thanks for the information.
@wamindustries 3 ай бұрын
Hey, thanks for the feedback and encouragement!
@Captaraknospider 3 ай бұрын
Is it possible to water it down if you need to fill a small warp. I need a flat surface
@wamindustries 3 ай бұрын
Hmm... I haven't tried that. I would guess in theory it would work if you're using shavings that were fine enough (probably best to build up the surface and then sand it down to the right thickness), though depending on your surface it may be better just to hand plane it to flatten it and then feather it in with the planer or sandpaper. If you're painting the surface, I have sometimes used a harder plaster. I would only use a thin layer though... keep it thin. Hope this helps!
@harshitharcy7434 3 ай бұрын
You need a better background and a lot more confidence in your presentation. Probably dress up a bit more into the tactical setting. Hope you do well 😊
@wamindustries 3 ай бұрын
Thanks for the encouragement and feedback
@Alex-wz4zi 3 ай бұрын
Yeah cuz I can't fix that at all
@wamindustries 3 ай бұрын
I know! The worst part is all the unknowns with it. At least from what I know of it, it's a little hard to measure and determine what would be necessary in order to bring it to original strength/safety factor.
@Alex-wz4zi 3 ай бұрын
@@wamindustries wow order what hahaha I build that shit
@Sisyphean1775 3 ай бұрын
Since it's been a few years, if you remove the white fan shroud that's attached to the condenser coil (the outside coil that gets hot), there's a decent chance you'll find dirt plastered against the inside of that coil. If enough air can't be forced through those little fins, proper heat exchange can't happen. That's what kills your efficiency and shortens the lifespan of your compressor. (Imagine how poorly a vehicle's engine would cool if the radiator was covered in dirt.) You can spray off the condenser coil to get all that junk out. Just don't use anything like a pressure washer or you could destroy the coil fins. There are all kinds of coil cleaners on the market; up to you if you want to go that route. On the other hand, the evaporator coil looked great! That's a really cool intro, by the way. Reminded me a bit of the intro for Home Improvement. Take care, man!
@wamindustries 3 ай бұрын
@Sisyphean1775 thanks for the tip!!! I'll have to give it a try!!