Who thinks about a laminator until you need a laminator and everybody needs something laminated but they just don't realize it yet. Thank you for taking the time Good job.
@barryjenner1177Ай бұрын
Thank you, this worked great.
@awurumibechimezie6404Ай бұрын
Please hat orinthead does thisbprinter use?
@Jaquinumberone2 ай бұрын
Great job 👏 it is a very complete tutorial! Thank you 🙏
@rosamagadan39262 ай бұрын
Praise the lord! Finally someone shows me where to find the calibration option! Thank you!
@entaildetail2 ай бұрын
thanks for the video. I was doing something slightly different but a few things you mentioned helped.
@HiDefMediaInc3 ай бұрын
Seriously, fucc silhouette. This is the trashiest motherfuccng thing I’ve ever purchased. I’ve spent so many hours cursing and screaming at this goddamn thing. I’m fucking over it and fucc you KZbin if you have a problem with my language.
@popescuionescu92943 ай бұрын
For me, the calibration tests were good everytime, but when I was trying to cut a print, it was off few centimeters, as soon as I disabled that stupid media sensor, it worked perfectly
@arivera25593 ай бұрын
Media sensor???
@figuresix3 ай бұрын
Hey can you make the music louder next time, my neibors could hardly hear it.
@emptywig4 ай бұрын
Way to keep the old gear going. I'm refurbing a 9900 and converting it to refillables. Still running a 3880, too. Keep on printing, man!
@analogmaniactruez4 ай бұрын
Hello, I've done calibrating my silhouette cameo 4, but how do you save the calibrate settings? I wanted to do a cut test and cut other design when I'm done with the calibration, but it won't allow me to do so and the calibrate cutting options kept popping up at the send option. The only way for me to able cut other design is by closing the silhouette software, and it just return back to square and my problem of not cutting the design properly just repeats again. Help please. 😢😢😢
@ENDO-G7 ай бұрын
Is it possible to cut 2 mm Craft Foam with this blade holder?
@ronleonard24157 ай бұрын
Like others, my green Cameo 4 blade assembly doesn't position the blade properly, so the blade protrudes from the housing even when the dial is in the most retracted position. I assume that this can be adjusted by turning the screw that surrounds the blade release mechanism on the top of the assembly. My question is, what tool is required to loosen the set screw in the adjustment dial?
@ronleonard24157 ай бұрын
Never mind, I answered my own question. Use a 1.5 mm Allen wrench to loosen the set screw (located between the numbers 11 and 1 on the knurled adjustment knob,) then use a screwdriver to rotate the slotted screw (cylinder) that surrounds the blade release button, until the tip of the blade is flush with the bottom of the assembly. Re-tighten the setscrew, and you're done.
@northernferrycustomization7 ай бұрын
@ronleonard2415 You are one hundred percent correct! Great troubleshooting. I've found that not all blades are the exact same length. They differ depending on the manufacturer, so being able to set the depth to the lowest setting mark comes in handy.
@brontobytesdm90037 ай бұрын
Ya that calibration seams very counter intuitive. The cameo does not print so not sure why they call it print and cut. I want to get a tracker feed type cutter and not sure what I would buy but not going to buy a cheap one that I have to toy with. a Gerber maybe ?
@ivanriobla8 ай бұрын
awesome video, thanks for the info
@UndisputedBoxingArvin-nk1dh8 ай бұрын
thank you for the tutorial
@MathieuDecker51509 ай бұрын
Very helpful! Thank you sir.
@Costudioca10 ай бұрын
What type of ink and media are compatibles with this printer ?
@oliverkristoffersen719814 күн бұрын
@@northernferrycustomization can it print on vinyl papir :)
@vanessareddy909011 ай бұрын
Thank you for the informative and honest review. I found it helpful.
@K.K.Wuckert11 ай бұрын
Badass man!
@valentinabaligac Жыл бұрын
Hello! I have a question... I have bought the green blade and the blade is not sitting right like in your video. Can you please tell how to repair that?
@northernferrycustomization Жыл бұрын
How is it sitting? Is it the correct size for the cameo 4?
@valentinabaligac Жыл бұрын
@@northernferrycustomization yes, its fitting in the machhine but the blade 45 is sticking out off the holder like 3mm and wont go further in... Or out of the blade holder. Can i somehow repair that?
@valentinabaligac Жыл бұрын
The yellow screw was the answer... I just uncrew it and it gies like butter in and screw the small black screw tighter... Thanks for the help so far annyway.... And the green blade is awesome!
@vesnal992810 ай бұрын
@@valentinabaligac I have the same issue, the blade is sticking out of the holder. I don't understand your solution ... which yellow screw did you unscrew? And how?
@hananmoh9891 Жыл бұрын
Hi , Have you tried the green blade for cardstock? Im having trouble cutting the cardstock it only cuts with 2 passes
@Tomb3 Жыл бұрын
I use this for my business dose well put had the Titan the bolts lol thought it broke
@HarryMcKenzieTV Жыл бұрын
it doesnt cut when i calibrate. im not using any matte because i dont have any but i know im still able to cut stickers and i did cut stickers without. so is it impossible to calibrate without matte? had lots of issues with the cameo including it occasionally not being detected. quite a pain, i would never recommend a cameo to anyone. cricuts are far more superior.
@HarryMcKenzieTV Жыл бұрын
as a firmware and software engineer i don't understand why they didn't program the registration marks to be closer to the edges in order not to waste space for the decals especially that there is a matte already which can serve as the margin so theoretically it should even be possible to cut very close to the edges. because there is also such thing as borderless printing. poor programming in my opinion.
@d8zdly Жыл бұрын
Which blade are you using, and what is the blade depth
@northernferrycustomization Жыл бұрын
In this video, I was using an aftermarket CB09 blade housing. It is like a manual blade with fine adjustment. It was deep enough to cut paper, so it was probably equivalent to a 1 on any Silhouette blade
@satisfyingspecial7276 Жыл бұрын
hi what would you prefer between cb09 blade and the green one C4 blade? thanks
@northernferrycustomization Жыл бұрын
Honestly, I prefer the cbo9 because you can fine tube the blade depth.
@janetsnitzer7090 Жыл бұрын
Hey!! Do u think you could please help me calibrate my pro? I have trouble comprehending so for me its so much easier to have one on one.
@northernferrycustomization Жыл бұрын
Send me an email at [email protected] or message us on Facebook. I'm sure we can work something out.
@johannasariov9450 Жыл бұрын
Where can we purchase the unit from ?? Thank you
@cassy6ful Жыл бұрын
Hello!! I am trying to find the drivers for this printer. If you have them or know where to get them, I would appreciate if you could share that information
@northernferrycustomization Жыл бұрын
I use the ones that Epson released last, I believe it was for Windows Vista or 7. They are on Epson's website. I use it with a windows 7 computer, so it is far less hassle than those using windows 10 or above.
@northernferrycustomization Жыл бұрын
If you are using the drivers on a newer computer you will have to run the drivers in compatibility mode. There are a lot of videos on here that can explain the install process better than I can, just look up "how to install drivers in compatibility mode". Hope I helped a little bit.
@jenniferjenkins991 Жыл бұрын
Did your machine come with the black edge guide to sit the mat against?
@northernferrycustomization Жыл бұрын
No, I ordered it off of etsy. The person I bought mine from no longer 3d prints them, though there are many who do. I actually have 2 different sizes for the Cameo Pro. The other one lines up with the far left line on the Cameo Pro for using the 24in mat.
@muggleintheupsidedown Жыл бұрын
Ugh, not working again, it’s WAY off! Like not just a little, it cuts completely crooked
@muggleintheupsidedown Жыл бұрын
I wasn’t having any issues, now all of a sudden it’s messing up all my stuff-.- thanks!
@northernferrycustomization Жыл бұрын
Hope the info was helpful not harmful. You can always set back to original settings if it did cause an issue.
@LouRao Жыл бұрын
Besides your demonstration for calibration issues, I too had the same problem and more. I had the Silhouette 4 Plus and returned it. Cameo 4 , Plus, and pro have WiFi issues, always disconnect. Reading the register marks failed often. If you don’t have good lighting the marks can’t be read by the machine. Software will crash often when doing test cuts, Windows or Mac version. When cameo does cut it will do it well. But, this isn’t often. The fact is Silhosette products are poorly made and the company knows it. It’s all about cutting cost. I will stick with Cricut Maker and Brother Scan & Cut 125e, best of both worlds. Yes, Cricut and Brother may of some cons but nothing to compared it by with all the issues Sihouette Cameo 4 has. So, would I recommend any of the Cameo 4 models, absolutely not. If anyone decides to buy the Cameo 4 I wished them best of luck not wasting time getting things to work in order to finish one project.
@northernferrycustomization Жыл бұрын
Thanks for sharing your experience! Little quirks the other machines have are nothing compared to Silhouette Cameo 4's issues. The only saving grace Silhouette has is Silhouette Studio, but doesn't make up for its machines. I was trying to do a print and cut last live I did, and the machine was trying to do something totally different... and I thought I understood this toy lol. Didn't make any sense. Had to restart the computer and the machine before it desided to work. The problems this machine has will never end apparently.
@arieagung Жыл бұрын
I wish I read this before, it was so frustrating with the print and cut, it always hits and misses. They said it has an error margin of 1.5mm, that's a lot on small prints. The horizontal axis is not even perpendicular
@flepyytheflop Жыл бұрын
I wasn’t there but I bet it was an amazing live!
@ManiacalThumbz Жыл бұрын
hey i had this issue too. What fixed it for me was the light. my shop had to much light which didnt allow the cameo to pick up on the registration marks. all i did was close the lid on it and bam. worked out fine. this was specific to my case but maybe it could help you too.
@bookconnections Жыл бұрын
Once you calibrate, does it stay calibrated?
@x0dartron Жыл бұрын
This was really helpful! My sister and I spent an hour last night trying to figure out the calibration (she's had the cameo 4 over a year and has never calibrated woops). Anyway we ended up giving up after an hour... Christmas Eve fun Would love a video for the adjustments on screen - we are both visual learners. We got the lining things up part down pat, now it's just "what are we actually doing on screen" part (that's when we gave up lol). Also wondering if it ever needs recalibrating? I know nothing about these machines, just trying to print and cut stickers for my planner haha
@northernferrycustomization Жыл бұрын
I only recalibrate mine when it it decides to not cut in the right spot anymore. Next time I recalibrate, which I have not had to do since this video, I'll go deeper into what you are changing when messing with the X Y calibration. Thank you for the story and input!
@nayforcecolection5827 Жыл бұрын
hai, can the green holder , put at carriage number 2 (right slot) ?
@northernferrycustomization Жыл бұрын
www.tiktok.com/t/ZTRV3mKto/
@northernferrycustomization Жыл бұрын
Yes you can, but it is limited to the cut setting for slot 2. I demonstrate the CB09 in slot 2 on the above video, and the green one works the same way in slot 2.
@nayforcecolection5827 Жыл бұрын
@@northernferrycustomization why i cannot cut well when use slot 2? can u help me please... if i not disturb you, may i can consultation with you... happy new year sir....
@northernferrycustomization Жыл бұрын
www.tiktok.com/t/ZTRcpaNvP/
@northernferrycustomization Жыл бұрын
It isn't perfect, and requires I bunch of trial and error do to the offsets programed into the software to accommodate the different attachments for slot 2.
@lynnettewilliamsfelton2829 Жыл бұрын
I heard the pro was a problem so glad I didn't buy it.
@northernferrycustomization Жыл бұрын
What did you end up going with, out of curiosity?
@emmaparish5815 Жыл бұрын
It also would not cut in middle of my letters
@emmaparish5815 Жыл бұрын
Idk what to know I am having so many problems it's won't cut my right side of words. Using 651 oracle. I barely got it to cut at all. The company making me send videos etc.. they don't wanna help.
@northernferrycustomization Жыл бұрын
I feel your frustration, there are so many quirks to these machines. I feel they are way too complicated and underdeveloped for the market they are trying to capture. There are cheaper machines with far more precision, actual cameras that give insane accuracy contour cutting, and they are selling this for 500 with $20+ blades... I felt cheated and I only paid 350 second hand.
@khark1224 Жыл бұрын
I am curious if you are still using the China green blade? I purchased one and I am having a hard time with its consistency. I cut mostly paper and what works for one sheet doesn't necessarily for the next.
@northernferrycustomization Жыл бұрын
I am still using it. I have not had any issues with its consistency, but I did buy some different blades than what came with it after looking at them under magnification. I have been using it for mostly htv. I have used my cb09 to cut paper with great consistency, but only because I have 60 degree blade for that assembly.
@linthamdesigns Жыл бұрын
Use the other end of you callipers to measure the depth, there is a depth slides out the end when you open the jaws
@northernferrycustomization Жыл бұрын
Yup, one could 100% do it that way to! I was trying to give a basic demonstration without having to go into explaining too much about caliper use. This seemed like the easiest visual with minimal explanation.
@amandalace3739 Жыл бұрын
You do an excellent job at explaining but I just can't seem to get it right, when I use the arrows to line up the printed sheet, it scans but doesn't cut. I've used Cricut for 2+ years and the calibration here is a nightmare :(
@northernferrycustomization Жыл бұрын
So it won't cut on the calibration sheet or when you are trying to cut a project? Yes, the cameo 4 is a pain, I will not be buying another silhouette product myself unless they make it more user friendly, and better tolerances.
@lacedesignsstudio Жыл бұрын
@@northernferrycustomization on the calibration sheet. I finally managed to get a cut, but it’s way off. I got it for large print and cut projects and it seems like as of now I’ll only be using it for regular cutting 😪
@tiredmechanicmlbb2687 Жыл бұрын
Thank you!!!
@zekecrowley8127 Жыл бұрын
I heard such good things about the 3 and I got a 4 pro. And holy crap its been a nightmare. I will try to remember to report back but its the biggest waste of money I have ever spent in my ENTIRE life. Hoping this video helps me with fixing it, if not well. I guess a fool is parted with his $500. I am with you though, I am never buying a silhouette product again.
@burrowskas3 ай бұрын
Did you ever get it figured out? I just got the pro and I'm having so many issues with print and cut.
@trebrauer6753 Жыл бұрын
Your etsy link doesnt work.
@northernferrycustomization Жыл бұрын
Looks like they are not being made anymore... to bad, they work great.
@vanessebaumann3625 Жыл бұрын
Does the CBO9 blade work on cameo 4 plus? If so what settings do I choose under blade settings please, cameo 4 plus does not give me option to choose ratchet blade so what would I choose please
@northernferrycustomization Жыл бұрын
@vanesse baumann yes the cb09 blade does work in all the cameo 4 series with an adapter. Silhouette Studio should let you change it, far right in the settings. Change to manual blade.
@nayforcecolection5827 Жыл бұрын
@@northernferrycustomization i have cb09 holder blade and use adapter colour blue, how to put them tu carriage 2 (right slot)
@kimmirandaart9909 Жыл бұрын
Thanks for the video, I'm gonna try calibrating my Silhouette Portrait. I noticed offsets are becoming more and more "off" and it's frustrating. I've tried using a lamp, restarting, using manual registration stuff, still annoying and awful lol. Wish me luck