Solex and Open Solo firmware are separate entities. Solex is a pay for app, open solo is free. Solex is one replacement for the 3DR Solo app, Side Pilot is another and there are others. Before you start telling people to tear their Solos apart, know what you are talking about. There is no need to disassemble the Solo to install Open Solo, some people who have this drone have no wish to tinker inside the shell. I have three Solos, all have been upgraded to open solo 4.0. Thanks Matt, your efforts in keeping this drone flying with your programming skills is greatly appreciated. So the point to all this is do your readers h before you give advice people in what to do. A lot of Solo groups out there to help you.
@supraneesritmboon68469 ай бұрын
I have 3dr solo now did not work I can not update. Could you suggest how can make it work? Please
@Rckrkid28711 ай бұрын
Do you still have this and if so how is it working?
@kevinjohnson9850 Жыл бұрын
i need help gettimg my 3dr up and running i have 4 green lights
@charlesdowens Жыл бұрын
Is this current? I have a completely stock solo and need to know what needs to be upgraded and updated if possible please
@michaeltesene7274 Жыл бұрын
Follow the instructions in the link in the description of this video and you’ll be flying tomorrow
@MrSilva-wj1yr Жыл бұрын
Hi there, solex only works for android, is that correct? Is there a similar app for ihone? Thanks best regards.
@clarkestallworth6370 Жыл бұрын
Hey this was a huge help. I followed your instructions to the letter and my upgrade went perfectly. Thank you so very much!
@nikosg66682 жыл бұрын
this solex up is not available
@thickyeez62652 жыл бұрын
First off $980. Amazon Canadian.. nowhere near $99
@stefanhangler39902 жыл бұрын
Do something know why the drone doesn't react when i push on the fly button?
@doorguru1688882 жыл бұрын
The only thing I'm waiting for is my SD reader and hopefully I will be back in business.
@allenstrack78152 жыл бұрын
can you plz help me set up my solo i’m at a dead stop
@Dwegan22 жыл бұрын
What if you have an iPhone? 😐 please someone help, I don’t wanna buy an android tablet
@hiimholdin23972 жыл бұрын
Seems like you're not a man girls do this men fix it
@hiimholdin23972 жыл бұрын
I need a 86 inch screen see anything
@jeepin2702 жыл бұрын
Um
@jeepin2702 жыл бұрын
Um umm
@stackedhippiechick2 жыл бұрын
I still have the solo app on my iPad and it works fine. However, it is no longer available on my I phone. I use the iPad for my drone only, so if I don't update the pad the app will still work.
@playingwithgaming2 жыл бұрын
I just really need to know if I should factory reset my solo first before trying to do the solex stuff
@nguyentien-og5pw2 жыл бұрын
My solo 3dr crashed, can you guide me to fix it? thanks a lot!
@kevarosenberg2 жыл бұрын
If it could scan and then copy would be perfect as a microwave replicator unit
@stevenpricexd2 жыл бұрын
Has anyone fixed the magnetic interference issue,
@SilverTopFlyer2 жыл бұрын
Greetings brother I hope you are well, thank goodness I'm able to find a few people making content in December of 2021, I have a solo I got her for 100 dollars with 3 batteries ,chargers ,transmitter, backpack, and GoPro 4. I can't get cam feed, I think I have lost script to control camera. Do you think open solo 4 will fix? I've never done any kind of installation, but I have read the instructions and it seems straight forward. What do you think???
@rpq19682 жыл бұрын
I just got a 3dr solo. Which tablet should I get? An iPad or an Apple?. Thanks for the info.
@platniumtongue2 жыл бұрын
Is your drone working ?
@rpq19682 жыл бұрын
@@platniumtongue yes. I just don't have a tablet for it yet. And I also have another drone new in box that needs to be set up.
@lesgrossestetesfontdesvide28722 жыл бұрын
IPad is apple tho??
@luispina40122 жыл бұрын
Thanks for info.
@davids.murray56452 жыл бұрын
Michael, did you know the password to your controller or did you have to do a factory reset? Forgot my password and want to know how the process went if you had to reset the password.
@vandenbroekeengineering93122 жыл бұрын
I have the same issue. Previous owners password is not working
@boku-no-pico Жыл бұрын
Press power and fly once shut off then hold it till it resets and it should be the default password
@Mightypepino763 жыл бұрын
Dude I'll trade my shit 3dr solo for a blackberry. This is the worst instructional video ever made.
@Manuel04RD3 жыл бұрын
Ok, for downland app 3dr solo you need buy old phone with old version of android 4.2, samsung galaxy s4, s5, note 4 note 5, for this drone and downland app 3dr solo i use on this year 2021 this method work good, without pay app solex.
@cakrawalajingga2 жыл бұрын
Hi there, I recently got 3dr iris+ drone; What do I need to flight this drone. the yellow blinking twice and off and still no gps green light on....do I need app such as qgroundcontrol? Thanks
@michaelgilbert78412 жыл бұрын
@@cakrawalajingga fly it with solex, it's amazing.
@michaelgilbert78412 жыл бұрын
Why wouldn't you just buy solex for $30 instead of buying an old phone for $30 just to use an inferior application?
@timothyfree27775 ай бұрын
It's Tim again I forget to say I have older iPad. Would it be easier to dl the 3dr app and update that way or will it not be compatible with my Samsung phone I used to fly the drone with. That says the software is for older phone ? Sorry to be a bother but I'd really like to get it working again.
@dhackens3 жыл бұрын
i think solex stashed my drone , I had it on my phone but never loaded it , my drone was working fine before .
@dhackens3 жыл бұрын
My controller hook to the drone but the phone wifi will not hook to the controller
@rod85y3 жыл бұрын
do you have issues with the hot end clogging up? I just got one and the filament ended up in a blob on the end. I'm looking for a silicone sock but I can't find one that fits
@1989rrichard3 жыл бұрын
Is the solex app still working ? Cant seem to find it on the android store
@boku-no-pico Жыл бұрын
The apple one is better and it’s cheaper
@loveonemark3 жыл бұрын
Ok so I got this drone got both apps idk why u thank I rushed into getting the $30 one so back to the drone I turned it on it flyes with no problem but I can't get the gopro to connect I guess when it asks me to go 2 wifi setting I do as asked find the solo*** put in the password sololink click connect n it won't connect I get a pop up askin me something like would u like go switch to mobile or stay wifi I tried each one dozen of times say I click on wifi it then read " wifi connection is to poor' or " waiting for a better connection ' can some one help me also there's some updates on the solo app do should I down load it.
@Lapachonga3 жыл бұрын
What’s the app u use? I know that the 3dr app is out.. I wanna try to fly my drone again :)
@Lapachonga3 жыл бұрын
Side pilot I think is the one I heard 3DR solo drone owners were using.. I will try the one u said solex?
@ErnestLloyd7163 жыл бұрын
How much is The software? Unfortunately maybe on purpose the price was omitted from your video.
@Mark333802 жыл бұрын
30USD
@BluesTracker3 жыл бұрын
The very day I was going to pitch my worthless Solo I found your video! Now it’s flying again! Thanks!
@kaseyangulo3 жыл бұрын
Mine was going great and then today it just wouldn’t turn on anymore 🙃 power adapter works but printer itself just won’t turn on
@cristiandiazgonzalez25163 жыл бұрын
Help! Buy my 3dr alone and I can't fly it, download solex but don't use it, I've already selected advanced Settings and I don't have firmware updates bar
@seanbrooks93083 жыл бұрын
I have 2 - 3DR's. Had em for a few years. I have flown them both already, and put one back in storage once I flew it 3 times. I have the solex battery meter to check out the batteries, plus bought some unused batteries. So thanks for your video. Make America Suffer.
@IFixShet3 жыл бұрын
My man we really need to work on your video skills thank you for the attempted information but unfortunately you were all over the map which makes it extremely hard to follow I would suggest perhaps remaking this video but that's just my opinion
@MrFittyTucker3 жыл бұрын
Yeah, what that Guy there said!
@axccreative2 жыл бұрын
yea there's some helpful info in here but this was all over the place and super hard to follow.
@jerryhoe72973 жыл бұрын
Thank you so much I'm back flying again
@stevencarter83 жыл бұрын
I was down for over a year. Thanks for this video post!!!
@delatorrebaby1013 жыл бұрын
I can’t get my filament to feed thru all the way. It feeds but none comes out. And the extruder doesn’t move on it’s own. Any tips ?
@LeftyPencil3 жыл бұрын
can you connect it to octoprint?
@McNibbler3 жыл бұрын
Does it require a proprietary slicer or can i just use like cura
@theflew3 жыл бұрын
You can use Cura. If you go to the Mac download they provide the Cura profile and filament configs for their filaments
@tntboxers52073 жыл бұрын
Taking mine back all it does is say it's offline or printer has a previous task. Haven't been able to use it.
@fuupdaass2753 жыл бұрын
Re start the app it freezes
@tntboxers52073 жыл бұрын
Restarted it , reinstalled it, unplugged it, updated firmware.....I took it back today
@fuupdaass2753 жыл бұрын
@@tntboxers5207 i hear ya it's not the best choice and you can see why it went from 500 to 99
@Jordakynett3 жыл бұрын
Nice mines a total POS
@tntboxers52073 жыл бұрын
Yup took mines back
@ndnplaya12223 жыл бұрын
What software do you use to create your own items rather than the the items in the template library? I got the same one today at Joanns and don’t want to print anything they have in their library.
@fuupdaass2753 жыл бұрын
Download .stl files online
@missywoods09133 жыл бұрын
Has anyone had any trouble with it connecting to your phone? My says offline all the time.
@michaeltesene72743 жыл бұрын
I would recommend not using the app or the desktop client. They are poor in quality and don't work half the time.... I use MatterHackers slicer. It works awesome! Also avoid Prusa with this printer.... Will cause shifts in the X and Y axis...
@tntboxers52073 жыл бұрын
I have, the app doesn't show it online when it is and paired with my phone. It either says printer offline or printer has a previous task when their isn't one.
@fuupdaass2753 жыл бұрын
App freezes have to restart after every print.i use the computer with the smart prep software it works better but just a basic program
@walnutz033 жыл бұрын
Man I was trying to get one of these they are all sold out now
@dakotalaw44553 жыл бұрын
For sure driving 3 hr for 1 lmao
@fuupdaass2753 жыл бұрын
Not really worth it another hundred will get you going tho
@tntboxers52073 жыл бұрын
He right spend a bit more and have something that's gonna work right out of the box or a good used one.