JJSC Tech

Пікірлер

@maswikengmediaproduction2331 17 күн бұрын

My guy great work right there,,,from South Africa ,,I wanted to ask I have zoom L20R MIXER,to logic pro then route it to streaming software (OBS) How do I separate audio and video .meaning video dedicated on another PC and audio on this logic pro

@JJSCTech 16 күн бұрын

Thanks! Dante for audio and a switcher with multiple outputs for video is the shortest answer.

@DjchizzleBeatz 20 күн бұрын

I have a problem where I couldn’t do a ecamm live while using serato and a radio broadcasting program everything worked except I couldn’t get a signal to the broadcast app

@JJSCTech 18 күн бұрын

If you use loopback, you’d be able to route the audio into that app and use ecamm for the visuals.

@DrMarkWaller 20 күн бұрын

if you check tht, how do you mix guest/interview audio? Does it still appear as slider in the audio menue?

@JJSCTech 18 күн бұрын

It would come in as your mic. You can adjust the guest’s volume in the interview window. Usually, I have the guest volume to the max and they are never louder than my mic. This option is checked for higher fidelity in sound.

@haies09 24 күн бұрын

Here’s some great advice I got for using the EQ “Don’t try to use the EQ as a full EQ as it isn’t one, instead use it as a corrective one”

@JJSCTech 21 күн бұрын

You not lying!

@shannonbell7052 Ай бұрын

Great video and informative information! My church's live stream mix/output sounds very muffled/overly compressed. We have a separate mixer for livestream only and the source mix at that stage sounds fine but does not translate to the final mix. We are using Pro Tools and Midas HD 96. The mix output is routed to the Blackmagic video equipment that is connected to the computer that is running the livestream broadcast. We are using OBS feeding stream yard. I have read somewhere that the Blackmagic devices can cause this issue, but I can't figure out if it's the livestream settings in OBS or is the issue somewhere else in the signal flow. Can you offer some suggestions on how to resolve the issue?

@JJSCTech 25 күн бұрын

Hello! How do you listen to the mix while mixing of the online audience. Where do you plug the headphones into? Do you have an audio interface?

@savvysavvs9952 Ай бұрын

Watch quality! Watch setup! Watch lighting! This is dope guys!🙌🏽🥳

@JJSCTech Ай бұрын

Appreciate you!

@jacksonabang7077 Ай бұрын

To you get that loud audio for live stream so viewers can to get a better. audio.

@JJSCTech Ай бұрын

Then put the loopback audio in ecamm

@jacksonabang7077 Ай бұрын

Hi JJSC, how do you route your logic to your live stream audio software

@JJSCTech Ай бұрын

Hello! I run it through my Apollo then in loop back. I can control the audio better that way.

@marcuscarter Ай бұрын

Hi, looking forward to testing this with my live stream this afternoon, last week the audios I was playing went through with an echo so 🙏 Thank you my friend

@JJSCTech Ай бұрын

How did it go?

@RevJorgeDiaz Ай бұрын

Thanks for the video. I appreciate your passion. We use the stock plugin Logic version to multitrack record. We input monitor each channel as well. We use to train volunteers before we go all out and begin to use the mix for our stream. HOWEVER, from time to time we’ll get the dreaded system overload message in logic? Can you share your Logic settings to help minimize the error? Thank you!!

@JJSCTech Ай бұрын

I appreciate you! It depends on your computer! What are your computer specs? It really depends on your computer specs. I have a 64 I/O buffer size.

@RevJorgeDiaz Ай бұрын

We have a base Mac Mini, M2 chip. 8gb RAM, 256gb SSD. Running Logic 10.8.1

@JJSCTech Ай бұрын

The ram definitely is the issue. Also if you are doing multitracking recording, 256gb will be too small. With such a small amount of ram, logic will start to use swap memory (SSD storage) which will ware and tear your SSD much sooner. You can try to use a higher I/O buffer but that might increase latency. You will eventually have to get another Mac mini with at least 32gb of ram. You can repurpose the one you are currently using for something else.

@RevJorgeDiaz Ай бұрын

@@JJSCTech thank you!!!

@cameronbrooks3767 2 ай бұрын

Still don’t understand why anyone would care to own those cinema lenses .. when you could just have a Blackmagic 6k pro and a Rokinon 10mm that would cost less than $3,600

@JJSCTech 2 ай бұрын

Many reasons! Color, highlights and shadows just to name a few. When they are put up against better cameras and lenses, it’s apparent. But for their price range, they are cool.

@soundbreed 2 ай бұрын

Hello. Thanks for sharing. About the 10ms delay from the Simple Delay plug-in. How was that calculated? Is it 10ms delay on each channel? Thanks!

@JJSCTech 2 ай бұрын

Hi it’s on the input channels! The delay is to compensate for the latency of the Gates during live mixing. It’s for sample accurate sync between the channels and prevents your drums from flamming.

@drej14 2 ай бұрын

Great video. Can anyone recommend a DAW for windows doing church live stream? Beginner friendly.

@JJSCTech 2 ай бұрын

Try to stay away from free DAWS for churches. Reason being, you won’t be able to find much help when trying to find out how it works or when things go wrong.

@drej14 2 ай бұрын

Thanks for your response. Could you recommend any one based on my criteria?

@JJSCTech 2 ай бұрын

I would go with the main ones. Pro Tools, Abelton and Reaper. For Mac all of those and Logic. Mac isn’t as expensive as before because of the Apple silicon.

@drej14 2 ай бұрын

Thanks much

@johnj8774 2 ай бұрын

I would recommend Studio One

@drej14 2 ай бұрын

Great video. Thank you. I need your help with my church sound. How to contact you?

@JJSCTech 2 ай бұрын

Hello @drej14! Thanks for watching! You can email me at [email protected]

@evidenceeriamiatoe3815 3 ай бұрын

Hey, for the DAW what would be the standard specs of the DAW computer to use for streaming?

@JJSCTech 3 ай бұрын

Hey! The cool thing about DAWS is that the computer doesn’t have to be that crazy. Any i7 and up from the past 3 years will do. Get an SSD 256gb and higher and at least 16gb of ram. If you are doing multitracking, get 32gb minimum and 512GB or higher for the SSD. I’m actually using a 2013 Mac Pro trash can for a Dante setup with Logic.

@Histibe 3 ай бұрын

Can I sync another Tentacle Track E 32-bit Recorder to the Tentacle Sync while it's connected to the stereo output on the MixPre, and sync them all together with the MixPre? I would appreciate your advice on this matter.

@JJSCTech 3 ай бұрын

You can only have one master. If the mixpre is the master, you can sync all of the tentacles to it. Note that the track e or the sync doesn’t have to stay connected to the mixpre after it syncs up, so you can have many tentacles synced to the mixpre simultaneously.

@Histibe 3 ай бұрын

@@JJSCTech Thanks so much for your reply! I really appreciate it. Does this mean I can set the MixPre as the master, connect Tentacle Sync to it, and use them until I power them off? If I power them on again, do I need to match Timecode again, right? By the way, what software can you recommend on PC to read timecodes in 32-bit recordings and sync Tentacle and MixPre files? Thanks for your feedback.

@JJSCTech 3 ай бұрын

Yup, you can run them till they power off. Of the power of, you have to re-sync them to the mixpre. I haven’t tried this so I’m not sure. I think Resolve can sync TC.

@Histibe 3 ай бұрын

@@JJSCTech thank you so much! Best wishes

@TheJosephOrtiz 3 ай бұрын

God bless you

@veronica.armstrong 4 ай бұрын

Gear Matters! 😂

@waltjennette 4 ай бұрын

We were all good until you got to the C200..."really good webcam." 🤣

@JJSCTech 4 ай бұрын

Yes sir! It’s pretty light for its size too!

@waltjennette 4 ай бұрын

Yeeeeeeeeahhhhhhhh!!!!! 🔥 Let's go!

@JJSCTech 4 ай бұрын

Appreciate you brodie!

@waltjennette 4 ай бұрын

Bro 🤯 what in the world lol

@JJSCTech 4 ай бұрын

Yea man, it gets a little intricate but it’s solid. This works well with remote guest as well!

@waltjennette 4 ай бұрын

@@JJSCTech Bruh, this setup is crazy! Salute to you fam. Lol. I was watching like yeah... John on that higher learning lol

@JJSCTech 4 ай бұрын

🤣

@ardensmith5840 4 ай бұрын

I hope this works for me!!! And yes, I've been having this problem. Thank you for this video.

@JJSCTech 4 ай бұрын

No prob! It’ll work great with 1 guest if you are routing your system audio into the L&R output channels in loopback. If you have more than one guest, the audio doubles. I’m trying to work with Ecamm to resolve this.

@clintedmonson 4 ай бұрын

Thanks for this post! I noticed the same about a week after getting my Apollo x4. Pulling audio in from each channel on the device is clean but the outputs mixed on the device's hardware bus (Aux, Mon, etc.) have a lack of fidelity making them sound like they are coming through a blanket. I'm a windows user and was able to use VoiceMeeter to achieve similar results to what you did with Loopback. Lesson learned...it has good preamps but is not a great mixer. Rock on!

@JJSCTech 4 ай бұрын

Yes! Thanks for the insight! UAD is a great recorder but man it lacks as a mixer. I’m too invested to change lol.

@lucadegregorio7839 4 ай бұрын

so useful! thx bro

@ELMEHDIHARRAB 4 ай бұрын

thanks a lot bro , u saved my day !

@jaysonm4921 4 ай бұрын

🎉 Promo*SM

@kevindillinger3699 5 ай бұрын

Packaging equals more money

@JJSCTech 5 ай бұрын

Ok. So after hours of testing with some of my friends, it seemed like a weird setting was causing the Teradek to appear blotchy from my side. After I ended the ECamm stream and testing both the BM and the Teradek they both looked great! The Teradek not only looked good, but the colors. the dynamic range and the overall imaged was closer to the image that was coming out of the Komodo X. The BM also gave a weird green cast and it couldn't really pick up details in the highlights and the shadows. Don't get me wrong, the BM is still good and is very good for it's price, but compared to the Teradek's image and what it offers, the Teradek is the better encoder.

@veronica.armstrong 5 ай бұрын

Scheduling a consult. Please reach out asap?

@JJSCTech 5 ай бұрын

Hello! @veronica.armstrong please send me an email at [email protected].

@veronica.armstrong 5 ай бұрын

Will do. I didn’t actually schedule the consult but I will still email.

@gaboguerra950 5 ай бұрын

About the GDU L shape back attachment. Does the little plate to place the Teradek comes with the GDU L shape plate or is it a separate piece ??

@JJSCTech 5 ай бұрын

Sadly, it’s separate. It does come in the kx quantum rig monster set, but it has a lot of other things you might not use.

@gaboguerra950 5 ай бұрын

@@JJSCTech thanks!!

@gaboguerra950 5 ай бұрын

Links 🙏🏻🙏🏻🙏🏻

@JJSCTech 5 ай бұрын

Links in the description now!

@realbingus 6 ай бұрын

Another issue that is not often spoken about is the terrible ASIO support on Windows with Dante. I ended up using Voicemeeter, in combination with Dante Virtual Soundcard, to send audio from the PC to the mixing console, and to receive audio into OBS on the computer.

@JJSCTech 5 ай бұрын

It also helps to put Dante on an isolated switch. That’s can help a lot as well.

@fritzroysmith8526 6 ай бұрын

Read the instructions before you start.

@JJSCTech 6 ай бұрын

On which part are you referring to? A lot of these parts don’t have instructions. You just gotta figure it out.

@adyisonwegener5746 6 ай бұрын

YOU ARE AMAZING BUT CAN I HAVE THE IPHONE 13 MINI IN YOUR VIDEO NO CASE FOR FREE

@JJSCTech 6 ай бұрын

No. 😊

@MoonerBros 7 ай бұрын

Thank you for sharing this experience. Downsizie is loopback app costs $99.

@JJSCTech 6 ай бұрын

It’s actually a great price for what it does.

@robdisner 7 ай бұрын

Thanks! I’ve got the MixPre 6 as a backup recorder, so this helps me get more familiar with a device that I don’t get a whole lot of use from during my normal workflow on set.

@RichAloha 7 ай бұрын

ALOHA in the House! 🤙🏽

@SDA-Sound 8 ай бұрын

I have extremely low latency, everything set correctly and room to spare. zero errors, high buffer and still get pops and clicks. Super annoying.

@JoaoVitor-yx3xh 7 ай бұрын

did you solved this? I have same problem

@JJSCTech 6 ай бұрын

What’s your buffer size and are you running Dante on a separate switch than your internet switch?

@JoaoVitor-yx3xh 6 ай бұрын

i solved this problem. Because i used a separated computer only to send 32 channels inputs to me with dante via @@JJSCTech

@chriskistner5424 Ай бұрын

You might have a clocking issue. We had something similar when our DiGiCo S21 was the clock leader and we used its DMI Dante card for the clock source. In our instance the solution was to set the S21's Internal crystal as the clock source and then in Dante Consoller to set the S21's Dante to Sync to external clock (which would in this instance be the S21's Internal crystal).

@Garrett-C-gg 11 күн бұрын

@@chriskistner5424 I believe this is what worked for me. It is a bit counter-intuitive because on the mixing console it is set to "internal" but in dante, (i have an expansion card) i have to set mine to "sync to external". Finally got rid of the issue.

@user-kz8uz8yz2c 8 ай бұрын

Thank you so much. This takes care of numerous issues with sound on Ecamm

@Vpg001 8 ай бұрын

When refreshing the page, the flags always change back to red/orange

@JJSCTech 4 ай бұрын

That shouldn’t happen. Do you have the latest OS?

@Damivarius 9 ай бұрын

Those audio differences sound like mic placement issues. The second audio test sound like you leaned in closer to the mic halfway through the test.

@JJSCTech 8 ай бұрын

Same distance on both test.

@IPerfectDark 9 ай бұрын

You do an unboxing and the first (and only) think you do is put on a screen protector real badly then put it in a shitty case. What is even the point? My great grandmar could put together a better video and she's been dead since before I was born. Just retire from youtube.

@tessifromi5268 9 ай бұрын

Dang, who hurt you. Are you good? It's ok, life doesn't doesn't need to be this angry.

@IPerfectDark 9 ай бұрын

@@tessifromi5268 Nah I'm not doing too good at the minute man thanks for asking, I have a few things going on. Probably the worst week of my life.

@boyaninho 9 ай бұрын

Hey man, have you tried the speedbooster, does it work the same as on OG Komodo? Thnx

@JJSCTech 8 ай бұрын

It does! It works the same way as the OG.

@1kizzle12 5 ай бұрын

Any damage to the sensor cover mask using it?

@JJSCTech 4 ай бұрын

@@1kizzle12weirdly yes. My speedbooster didn’t scape the thin fabric but when my friend used his speedbooster which is the same as mine, the thin fabric was scraped.

@media6433 10 ай бұрын

Dude I spent all day trying to figure this out for our church on Sunday. Thanks for the video!

@ThereWasNoFreeName 10 ай бұрын

That's how most professional stuff comes. Simpliest packaging, quality stuff. No flasy cardboards costing half the price of the unit.

@goPACK1978 11 ай бұрын

I would like to be able to rename flag colors on my iPad/iPhone. I no longer have a Mac so I can’t do it that way. Is it possible?

@Gojo_is_hot Жыл бұрын

Why you gotta dis dub like that bro

@JJSCTech 11 ай бұрын

What does dub mean where you’re from?

@Gojo_is_hot 11 ай бұрын

@@JJSCTech I was thinking about anime

@JJSCTech 11 ай бұрын

@@Gojo_is_hot ahhh gotcha.

@ResearchersOfTheTruth Жыл бұрын

Is there a like for Your Apollo software? I never heard of it

@JJSCTech Жыл бұрын

Hey! The software comes with the Apollo hardware. But this tutorial will work the same with any audio interface that is configured to push the audio through to the main mic channel in Ecamm.

@JJSCTech Жыл бұрын

They are called the RED DIGITAL CINEMA KOMODO Side Ribs.

@iamvelour Жыл бұрын

I don't know why there's not more ppl talking about this but I also hear uad doesn't play nice with discord either but running it through loopback fixes it too. I have the Apollo twin and looks like im gonna have to get loopback.

@JJSCTech Жыл бұрын

Yes! It was a welcomed discovery.

Ең жақсы KZbin

Пікірлер