I'm guessing you scratchbuilt all the functional parts. I haven't seen any parts like this available.
@_Answer_Ай бұрын
Yeah, all custom designed and 3d printed for the most parts
@crushingvanessa3277Ай бұрын
@@_Answer_ I saw someone a few years ago machining parts but he never finished it. Both of these look promising. How strong are the parts your making?
@_Answer_Ай бұрын
@@crushingvanessa3277 trying to make them as sturdy as I can, it's stronger than I thought PLA would be. But they clearly aren't indestructible!
@crushingvanessa3277Ай бұрын
@@_Answer_ I scratchbuild to but not 3d printing, haven't learned it yet. I also find that to make it scale, it won't be strong unless you use some type of metal. I doubt you'll be pulling people out of ditches with this truck.
@_Answer_Ай бұрын
@@crushingvanessa3277 scale for scale it would do it. Already tried it. Boom is metal and some other key parts also.
@jamesdash19062 ай бұрын
I'm jealous
@datnguyen51124 ай бұрын
Nice i wish my is350 24 can fit too 😢
@_Answer_4 ай бұрын
You'll have a hard time getting it to fit in the diffuser holes.
@datnguyen51124 ай бұрын
@@_Answer_ oh is350 diffuser holes different is500 right
@_Answer_4 ай бұрын
@@datnguyen5112 yes, the 500 diffuser is made to have stacked tips, not the 350 one
@datnguyen51124 ай бұрын
@@_Answer_ oh i see maybe i have to go muffler shop to modified the hanger to fit the diffuser holes
@breeze04136 ай бұрын
Awesome awesome I love that tow truck wow I'm going to figure out how to build one of them soon or later to go on my video with my other trucks awesome
@SirCherbs6 ай бұрын
Hey man, I have a RC F in CA and I have been eyeing this exhaust because its complaint with our lame laws here. Could you post a fly by video at WOT? Theres very little content of this exhaust online
@_Answer_6 ай бұрын
Being winter it's gonna be hard to do unfortunately
@SirCherbs6 ай бұрын
@@_Answer_ totally understand, given the large snow bank in the background of this video 😅 thanks for this video anyways!
@MotorheadRc7 ай бұрын
Hello. Your have built the epic heavy wrecker. You had told me once you 3d printed the light bar. Any chance you would share the file for just the light bar. That would be great. Btw awesome truck 👍👍
@_Answer_7 ай бұрын
Hit me up : androidbrou at gmail dot com
@LEVIDOTS7 ай бұрын
That’s good to know❤
@Rocketman442-RC8 ай бұрын
What did you use for actuators to lower the rear gate? And does it raise and lower between upper and lower levels
@_Answer_8 ай бұрын
That's the old version, but it's basically two worm screws driven by a strap under the trailer. It works exactly like the real thing
@YandRproductions9 ай бұрын
Did you end up finishing it
@_Answer_9 ай бұрын
Still working on it! Making the body currently, so lots of finishing work will be needed!
@JoseRodriguez-wx5wr9 ай бұрын
What material did you use to build the structure of the trailer?
@_Answer_9 ай бұрын
Mainly aluminum angle bars riveted together
@JoseRodriguez-wx5wr9 ай бұрын
@@_Answer_ Another question what material did you use for the complete trailer box?
@_Answer_9 ай бұрын
@@JoseRodriguez-wx5wr the box is made of plexiglass sheets glued together
@MotorheadRc10 ай бұрын
Where did you find the light bar? I'd like to purchase one.
@_Answer_10 ай бұрын
Got it on Amazon
@MotorheadRc10 ай бұрын
Thank you. So much I appreciate it. I'm building the same truck but jet black. It's a beautiful truck!
@MotorheadRc10 ай бұрын
Ok I'm sorry I meant the bar that the light sits on. The Roll bar?
@_Answer_10 ай бұрын
@@MotorheadRc ahhh, my bad! That's custom designed and 3d printed by me.
@MotorheadRc10 ай бұрын
Oh wow. That's a great job.
@zandercroom754710 ай бұрын
Could you make more beds?
@MotorheadRc11 ай бұрын
that is a great job id like to see more.
@daf_model_nl11 ай бұрын
Nice! Now i need to copy this in scale 1:4
@Adrian-wt4pc Жыл бұрын
❤❤❤❤r idj d hff
@mubeenbil Жыл бұрын
The tips seem like they could come out a bit
@_Answer_ Жыл бұрын
They could, but honestly, I'm happy the way they are, cops don't like exhaust around here, so the more stock looking it is, the better!
@mubeenbil Жыл бұрын
@@_Answer_ how the drone at highway and cruising speed , also under load ?
@_Answer_ Жыл бұрын
@@mubeenbil almost non existent. Very minor at low speed under moderate load, but can't even notice on the highway
@grimloxx Жыл бұрын
How much diff does it sound compared to stock ?
@_Answer_ Жыл бұрын
More throatier, basically the way the car should've sounded from factory
@grimloxx Жыл бұрын
@@_Answer_ hmm okay maybe i’ll get this axle back instead of that titanium 1,800 dollar one lol. Was the installation pretty simple ?
@_Answer_ Жыл бұрын
@@grimloxx straight forward! You'll need a 14mm to remove the 4 bolts, and liquid hands soap really helps to get the rubber hangers off and back on!
@grimloxx Жыл бұрын
@@_Answer_ litty ! Well damn thanks alot for this video bro i been looking all over for a different option then the RR racing valvetronic, you did a wonderful deed here sir 💪🏽🙌🏽💯
@codyphillips2408 Жыл бұрын
Does it have any drone?
@_Answer_ Жыл бұрын
Nope, it's "bassier" but nothing I'd consider drone (had droning exhaust in the past and hated them, this one is perfect)
@clarencesandoval6625 Жыл бұрын
'promosm' 🎶
@kmcclendon91 Жыл бұрын
Can you drop the link where you ordered it from? My IS500 will be arriving soon. Also does it void factory warranty?
@_Answer_ Жыл бұрын
Got it from my friendly local speed shop. But a bunch a website list it, although stocks might be low as a bunch of 500 owners also got it after I proved it fits.
@BimT5 Жыл бұрын
Whats the height/width/lenght? Im planning on making one of my own :)
@_Answer_ Жыл бұрын
47" long, 7.5" wide and 12" high
@breeze0413 Жыл бұрын
Awesome Awesome
@breeze0413 Жыл бұрын
Awesome awesome
@paulinamejiaheredia3265 Жыл бұрын
00
@paulchandler2180 Жыл бұрын
How long you been working on this one and and are you selling kits for your century 35 ton man when you get it worked out can't wait
@_Answer_ Жыл бұрын
Hum, been working on and off on this one, started probably about 6 months ago. Not selling anything currently, might in the future, but still unsure
@paulchandler2180 Жыл бұрын
Would you build me one
@_Answer_ Жыл бұрын
@@paulchandler2180 price would probably be prohibitive since there's so much work involved
@paulm8588 Жыл бұрын
Is this something that I can purchase
@_Answer_ Жыл бұрын
Not yet as I'm still in the testing phase, but I'll probably make some more once the bugs are ironed out!
@blu_is500 Жыл бұрын
Sounds awesome!!
@bradyobrien9 Жыл бұрын
Now do it at 7300 RPM!
@_Answer_ Жыл бұрын
You'll be able to try it when you get yours! :P I already sent ya enough beers! haha!
@bradyobrien9 Жыл бұрын
@@_Answer_ Turns out I didn't need any. Tax free and 5% off sealed it! Thanks for figuring this out for us all though!
@ramonramirez1775 Жыл бұрын
So if its a direct fit then will the Invidia q300 exhaust fit my is500 as well even though it says it doesnt?
@_Answer_ Жыл бұрын
Yes, for the Q300 you will need a bit longer rubber hangers due to how the tips are placed so they are not to close of the diffuser, but other than that, it'll fit.
@2ZZGE100 Жыл бұрын
Only axle back can fit. If you are looking for a full catback from RCF, the mid-pipe does not fit as IS500 is 2 inches longer than the RCF so it requires cutting some part of the mid-pipe.
@_Answer_ Жыл бұрын
@@2ZZGE100 Correct, the direct fit is axleback only. But, in the case of the Q300 catback, it can easily be fitted with extensions, a guy on CL installed one.
@sethirahat Жыл бұрын
Can you do some runs please
@_Answer_ Жыл бұрын
@@sethirahat planning to once the weather gets nicer
@emersonpedro3944 Жыл бұрын
Lindo demais 👏👏👏👏
@markcarr1605 Жыл бұрын
Looks and functions perfectly
@emersonpedro3944 Жыл бұрын
💯💯💯
@allaspectsrc41782 жыл бұрын
This has to be the best I've seen up to now it just look right
@_Answer_2 жыл бұрын
Thanks!!
@rc_farmer48662 жыл бұрын
Helluva wrecker!!
@redwolfrc1.142 жыл бұрын
Beautiful American wrecker tow truck my friend✌👍😎💯
@michaelkealoha9762 жыл бұрын
I would like to see a rotate type just like the real thing . Now that is awosome
@_Answer_2 жыл бұрын
A rotator is one of my future projects!
@danielmiller18562 жыл бұрын
Details please!
@_Answer_2 жыл бұрын
Well, it's pretty much all custom made, any particular details you want?
@JohnJohnson-qg2ub2 жыл бұрын
Real nice bro.... Hell of a clean up job! Thanks for sharing and hope to see more.
@BrianEvo8m2 жыл бұрын
Amazing job! I love all the detail. do the storage compartments open as well?
@_Answer_2 жыл бұрын
Nah they don't. Maybe for V2 they will!
@Miguel_Cam2 жыл бұрын
so how did you actually built that wrecker. 3d?
@_Answer_2 жыл бұрын
Yep, that's mostly 3d printed, with the base truck being a Tamiya Grand Hauler
@grrigsby81252 жыл бұрын
nice build man good job
@breeze04132 жыл бұрын
Wow video really nice
@user-ow3kc8qs5g2 жыл бұрын
hello friend, please tell me you can video in detail how and with what details it is very necessary to do
@oliverkurtganter55892 жыл бұрын
Sehr schön.
@woodpac93 жыл бұрын
i am aiso building one and 3d printing my parts. did you 3d print your parts? are yoy going to share your files on thigiverse ? thank you for your video!
@_Answer_3 жыл бұрын
Yep, mostly everything is 3d printed. I might share some later down the road, but not until I'm finished with the build!
@anhdao16783 жыл бұрын
Dear Sir, i am looking for the finished 1/14 which has functions like your item. Would you like to sell it ? please email me : [email protected]
@thatsmyrc4 жыл бұрын
nice work
@boxodoughuts64805 жыл бұрын
Please show a pinout of how you did this i needd to know soooo bad.
@shingod7006 жыл бұрын
Contrairement au reste de la planète, ce n’est pas officiellement légal au Québec. Toronto on un projet pilote pour authoriser les motos à remonter la file. Ainsi le temps de transport est réduit pour tous le monde.
@hojenaterceiraguerramundia19987 жыл бұрын
tem como fazer no de 4 pinos
@tommybertrand74529 жыл бұрын
Le monde save pas conduire au Québec c'est effrayant... Moi aussi j'ai commencer a faire des videos avec ma dashcam juste au cas jpognerai un accident par un sans dessin