yodayoungling

Пікірлер

@nikoladimitrijevic8172 Ай бұрын

I have a couple of questions, hope they aren't too strange. Should the film emulsion face the plastic thread, or does orientation not matter? Is it okay to pour the chemicals in the light (of course, when the tank is closed)? Thank you in advance for your answer!

@yodayoungling Ай бұрын

The film can face either direction, but it’s easier if the emulation faces the inside of the spiral. As this is the natural curve of the film, you won’t have to fight it as much. Once the lid is closed, it is light tight, and you can pour all your chemicals in and out with the lights on.

@nikoladimitrijevic8172 Ай бұрын

@yodayoungling Thank you very much for the response and the tutorial, I truly appreciate it.

@argusl0067 6 ай бұрын

Rubbish quantity of these back light leak problem

@mariotraversi479 8 ай бұрын

Great review, overview, user manual!

@RobertoCavalieri 9 ай бұрын

In the third solution what should be the thickness of the frame underneath?

@h.w.6580 9 ай бұрын

unbelievable how much energy and design effort you have invested. I admire your patience...

@yodayoungling 9 ай бұрын

Thank you very much! I got a product that was unusable, and wanted do at least have a chance to use it. I figured the effort would be worthwhile if I could help a few of the other backers make some Lemonade out of the lemons.

@zetaphotography6548 9 ай бұрын

No one has received their backs.

@SirFunky 10 ай бұрын

what even is the point

@EB-qj9ki 11 ай бұрын

worst piece of crap I ever bought since 1979. Event the USSR camera were not that poorly made ! avoid at all cost (pun)

@rossmansell5877 6 ай бұрын

Had a Zenith 80 since 1968..still going strong despite Soviet quality control...or lack of it!.....

@andyvan5692 Жыл бұрын

also that ground glass idea isn't new, the arcbody and flexbody had this system for the 120 backs (12-on\A-12) so that you could apply movements, focus etc. with the back off, and then like a monorail view camera, the film then goes in, and you shoot. (there was a unique feature of this, there was a slot in this gg frame, which allowed for "perspective correction slides" to be inserted, which if tilted 10/15/20 deg. would nullify the distortion, so one could still focus normally; this also even allowed the regular prism and hood to be attached).

@andyvan5692 Жыл бұрын

the focus issue is NORMAL, the Hassy PB from John of "hassleblad the expert" KZbin channel, and even the Lomography Lomograflok back {for 4x5" film cameras} has some kind of spacer to account for this back focus (physics, the cartridge is inside a shell, of which the edges are thick, and the shell itself is a few mm thick), this is the reason the focus is off, the distance means the film is NOT on designed in focus plane with the camera manufacturers, who assume a certain kind of film inserted into it, hence a set focus (the shims in a lens mount, for eg. are for this purpose too). In the V systems case a spacer shim (focus mask) is inserted above or below the "ground glass" focus screen, this calibrates the focus, so the lens tube setting is correct!-DON'T adjust the lens shims or mounting flange spacers , THEY are fine, for normal 120 backs!, just this stock is further back, so get the masks installed, but paint some visible part of it, so when using 120 you don't forget to remove it.

@cheung714 Жыл бұрын

Is the waist level viewfinder cannot be used if the spacer is used? Thanks!

@jumbocheung2812 Жыл бұрын

My shutter was jammed, and I tried to push the pin, but still not release the shutter. Any luck on other way.

@HidemiUchida Жыл бұрын

I am not sure if my experience can help. I had been in shutter jam trouble since I attached HB unit and unable to remove for 3 months. But I found KZbin video which solve shutter jam by push down film ejection hook to bottom. It helped to solve shutter jam. 2ndly, I fire and wind crank and attempted to remove. It does not work. Fire shutter, then try to remove( do not wind crank!) Hope you can remove unit.

@tobiah. Жыл бұрын

Any experience with the fact that it doesn’t eject the first slide?

@yodayoungling Жыл бұрын

yep i had trouble with that once, are you trying with Mini or Square? i oddly found it easier with square. Be sure to remove the metal dark slide, Try slow and steady presure, and push the winding knob slightly inwards. at least with mine, the hardest part was getting the instax dark slide removed. after that the pictures came out fine. Also check if the hook in the hasselback is getting caught on the "cloth tape" behind it (i pulled off the tape on mine.) good luck!

@MattiusGlutius Жыл бұрын

Just got the Nons. The side ejection is the only negative as you mentioned. After watching your video it is a small price to pay for accurate focus. I was messing around and shooting indoors f4 at shutter speed 1/15 and the shots are sharp and nail focus. Everyone watching should go with the cheaper option in the nons back.

@DavidCWiley Жыл бұрын

Too late for me and the rest of the escura backers. Lucky you Matt

@yodayoungling Жыл бұрын

If I had the choice today, I would probably also go for one of the other backs, and a lot of people have recommended the NONS. but as I said in the video, this is about making the most out of what we got with the Hasselback. (make some lemonade with that lemon?)

@MattiusGlutius Жыл бұрын

@@yodayoungling that totally makes sense. I always watch videos before purchasing, I just wanted to put a note for anyone looking to purchase as a potential alternative with fewer downsides.

@yodayoungling Жыл бұрын

@@MattiusGlutius ya for sure :)

@DavidCWiley Жыл бұрын

@@yodayoungling , ok so i had the 4.3mm spacer printed by the help of my friend and i have achieved tack sharp focus on my 180mm f4 @f4. Downside is that i cannot put the focusing hood on and achieve infinity focus.

@holgerjungnickel8698 Жыл бұрын

Any tips for dismounting other than in the video? Using a hasselblad fc2000. Shutter works propperly but cant get this piece of sh.. of the camera.

@yodayoungling Жыл бұрын

Hmm, not sure, I have no experience with the FC. Maybe the firing pin behaves differently on your model? The firing pin is the only thing that actually prevents the back from being removed. It has to be flush with the body to attach or remove the back.

@Juliane2412 Жыл бұрын

You're brilliant, thank you! I got mine hardly dismounted again. My BF had to use force, so I won't touch it soon enough again, still, I like the idea. And ja, communication was a disaster. They never answered. I don't have a problem with project lasting long, but I have a problem with bad communication. I will try to make myself such a spacer. Also I think it's bit of a problem, that there's no clue of where to find a manual or whatsoever. It feels a bit, like they wanted to get rid of what was a great idea and still could be - and ja, maybe making such a spacer a delivering such one to the backers would solve some disharmony....

@morbuch5903 Жыл бұрын

Junk. Mine jammed with its first mounting, jammed the shutter and just barely was dismounted. Run away.

@HopefulForever-ln5xm Жыл бұрын

It took me two packs of film to figure mine out

@DavidCWiley Жыл бұрын

Thanks for the info sir. The info is very good. Well, I think i want to sell mine. Anyone wants it? I have not used it yet.

@오환건국쵝오 Жыл бұрын

you solved my problem! thank you! now there are three options for me 1. makning adapter for focus 2. use ruler and the distence chart 3. sell this whole stuff on ebay

@DavidCWiley Жыл бұрын

I would love to do #1, but I'd rather #3... Good Lord, I think i have been bamboozled by Escura

@오환건국쵝오 Жыл бұрын

@@DavidCWiley Yes, it's true. I regret the past three years. While contemplating creating an adapter as the second option, I immediately sold my camera body after seeing it scratched due to the slide lock. It's a disappointing situation.

@DavidCWiley Жыл бұрын

@@오환건국쵝오 , I hear you my friend. sigh..... i need to crack my head on this... pretty disapointing but nevertheless another challenge.

@user_itsdoable Жыл бұрын

The focus shift can be marked on each lens like the IR mark, and then you don't need to use a table. A 2mm shift has the same amount of rotation on the lens helical. But a screen spacer is a nicer solution.

@yodayoungling Жыл бұрын

good point, i dident think to try that

@Martin_Siegel Жыл бұрын

Great idea, for I can't user the "lift up the focusing screen" method with my camera.

@DavidCWiley Жыл бұрын

sorry to intrude sir, but do you mean rotate towards the left or towards the right with the left hand? Sorry for the stupid question.

@HopefulForever-ln5xm Жыл бұрын

@@DavidCWiley I haven’t looked at mine but it would be on the side that makes the focus further away

@rmaruo Жыл бұрын

Hey, thanks for the help. :) I'll try to get the spacer for the Hasselblad focusing screen, any suggestions ?

@yodayoungling Жыл бұрын

Check out the link to my website, i just added dementions and a 3d model for the spacer. If you can get it 3d printed it might help get you better focus :)

@rossmansell5877 6 ай бұрын

Plastic card right thickness. Cheap

@JimmySng Жыл бұрын

thanks. now i got to do option 3

@brunorubin8762 Жыл бұрын

Thanks greatly appreciated!

@yodayoungling Жыл бұрын

Glad it helped you out 👍

@mikegutterman3427 Жыл бұрын

Thanks John-Michael!

@polashguria8212 3 жыл бұрын

Osm👌👌👌👌

@kathyalanfourd8225 3 жыл бұрын

How did you learn gold smithing? I’m a beginner silversmith but would like to eventually work with gold, do you have any book recommendations?

@yodayoungling 3 жыл бұрын

I started learning with a master jeweler in California, and then went through the apprenticeship process in Germany. I didn't really learn from books, so i cant make any recommendations. I would just say try and find someone to learn from directly.

@flyingcheff 3 жыл бұрын

Gold, what is that? Gorgeous ring!! Great to see the making of, thank you.

@riosol8950 4 жыл бұрын

Ermmm ok whatEVER...?

@tom-harley 4 жыл бұрын

What is the stone?

@yodayoungling 4 жыл бұрын

Its called Hackmanite, It changes color depending on if it is exposed to UV light or not. This one ranges from a pinkish color to the dark violet you see here.

@tom-harley 4 жыл бұрын

@@yodayoungling Fascinating, thanks...