What was the cause of this? My friction disc slips to, but only when starting from cold
@cceynar948 ай бұрын
just put a brand new carb on my champion generator and it starts right up and just goes instantly full throttle
@Dj-Raju8 ай бұрын
How To Fix Problem😢
@daanglerguy10 ай бұрын
Thank you for this video and the original video, I have a Champion Model 46595, and I was able to get mine up and running with the comments on the other video. It is pretty simple, and as everyone else said, count the turns and ensure you put that plastic needle in the same way. I marked mine with a marker to know where i had it. Google plastic idle needle jet and it'll come up.
@bret1961 Жыл бұрын
This fix worked perfect for me!
@jorgevelasquez9955 Жыл бұрын
brilliant!
@jeffreybrianring6392 Жыл бұрын
Excellent idea
@brianberkley1357 Жыл бұрын
15 second ad for a 14 second video that tells me nothing.
@brianberkley1357 Жыл бұрын
Exactly what I'm dealing with right now.
@MrBen527 Жыл бұрын
Did the pulley shift out of place?
@TheAmishElectrican2 жыл бұрын
Lol What is this junk ? I watched both videos and you gave NO information on how you fixed it !
@jagsingh5072 жыл бұрын
I just bought one few days ago. Wondering if I can buy a conversion kit to one hand operation
@samiam247 Жыл бұрын
They don't exist you have to build one of your own. lots of ideas on youtube
@jackjohnson95152 жыл бұрын
I just bought this exact splitter (and the leg kit which seems decent). My first thought was some sort of one handed conversion and this set up is different than another electric splitter that I’d modified. Definitely ingenious and ultimately effective! Nicely done
@mothernaturerules2 жыл бұрын
Thanks it works great
@blowingsnow4fun2 жыл бұрын
Hey. I have an 1989 824 with a 8 Hp Techumse. I’ve had it a long time, and solved slot of issues along the way. I had an even older 724 with a 7 Hp Techumse that I gave to a friend after I fixed it up, which he’s still running. I’d start looking at a carb problem if it were me. Did you rebuild the carb yet? Some guys buy those Chinese eBay carbs and have good success. What’s the history of your machine? Did it just start stumbling like this? What have you tried? I shot a short video of my 824 throwing snow up at my cabin a couple of weeks ago. Here’s a link if your interested. kzbin.info/www/bejne/eWHFpauigr16hdk
@mothernaturerules2 жыл бұрын
Thanks for posting a link I'll check that out, I replaced the carb with an Oregon carb it's been running great ever since
@fenrislegacy2 жыл бұрын
Man, that's one clean-looking 824.
@parkpoomtananimit8502 жыл бұрын
Excellent
@mikec92612 жыл бұрын
Just curious why you think people wanna see your generator running? See the fix would be kinda cool, since many people have the same issue - but a video of a generator just idling really isn't the least bit helpful (or interesting). Just sayin.
@mothernaturerules2 жыл бұрын
It's for comparison, if you watch the first video with the engine surging you can see the governor moving while in the fixed version it's steady.
@claudiogiovingo49033 жыл бұрын
need to clean the slow jet, the one that is under the relenti screw
@Patriottoo23 жыл бұрын
Well done. No, wait, better than well done. Nifty!
@artadams13 жыл бұрын
It's called the idle jet it's on all small engine carbs.
@kebo573 жыл бұрын
Nice work.
@abesawatzky24613 жыл бұрын
I have the same one that had the same problem I just change the oil and run premium fuel and stop doing that automatically. Those champions they love their premium fuel
@mothernaturerules3 жыл бұрын
I started using ethanol free which is a premium gas.
@lexhtfdct72303 жыл бұрын
What was the issue?
@charleswidmore54583 жыл бұрын
Simple and Effective. Perfection!
@johnmcgrath86733 жыл бұрын
A new carb was $15 on Amazon. Sounds noisy and rattles like mine. I'm working on that...
@deernutOO4 жыл бұрын
Wondering how you get the wood block into the wheelbarrow.
@mothernaturerules3 жыл бұрын
It's rolled out of the truck bed into the wheelbarrow.
@JRJunior86244 жыл бұрын
at last, somebody sensible who actually turns the thing on so we can hear what it sounds like!
@samiam2474 жыл бұрын
That's in nice shape !
@samiam2474 жыл бұрын
That's an awesome setup !
@samiam2474 жыл бұрын
Very ingenious !
@anthony.m.morgan5 жыл бұрын
looks like you are missing the throttle spring, its the very fine spring that goes over the throttle arm. that will cause that interruption and make the engine rev up and down like that among other things however thats the first thing i would have eliminated before going further.
@jimbohrman79206 жыл бұрын
I have the same problem - just changed the carb and it is still not running properly but this was due to my mistake (as it turns out with the 3 gaskets from the new carb I probably put one of them on wrong. I then did another recommendation with the original carb by putting a pin in the small hole in the plastic jet under the black plastic screw. Now the engine runs like it should. I need to tweak the adjustments to make sure its in the best running mode. As a side note the replacement carb I got from Ebay for $10 was not the exact replacement cause my model has some kind of wired auto-choke on top of the carb. That assembly can't be put on the replacement. It has a manual choke arm only.
@Hunteroo46 жыл бұрын
My 4000w runs fine at low idle, but then when it has 1500w+, it surges and eventually shuts off. I changed the oil and put fresh gas in it and it's still doing it. Carb or ?
@Patstar7775 жыл бұрын
Hunteroo4 it’s the idle jet located on top of the carb. Clean it.
@nascarracer8866 жыл бұрын
2\2018 I had the same issue, and this worked perfectly. Generator runs smooth now. just remember to count the number of turns when you back out the black plastic screw, 5 turns for mine Champion 3500. Gently pry up the black plastic jet. I used a strand of wire to fit in the jet! No need to remove carburetor. Even though I Stabilize My Gas And Run The Carb Dry, This Still Happens. Plus I Start It Regulaly.
@itrepairs6 жыл бұрын
Had the same problem,tried cleaning the carburettor etc but found it was the float pin not letting enough fuel in to the bowl,adjusted the pin by pulling the spring through the gap the float pin connects to curing the problem .
@mothernaturerules6 жыл бұрын
Interesting, I'll take a close look at that when I pull mine apart again.
@alderete747 жыл бұрын
Thanks for the info. I took out the black plastic screw on the carburetor and then removed the black plastic plug it was indeed plugged. I used a guitar string (B) to push the debris through reinstalled and it purrs like a kitten.
@mothernaturerules7 жыл бұрын
Good to know you got it running right.
@gabeprice56483 жыл бұрын
B string huh
@Vibrotronic2 ай бұрын
@@gabeprice56480.011” to 0.013” or so in diameter.The smaller torch tip cleaners work excellent as well.
@parentconcerned68277 жыл бұрын
As other stated. Gas line dirty. Old gas. Clean or replace carburetor. Drain gas tank.
@idahooutdoors26957 жыл бұрын
Ok just fixed mine have the same issue it's the low idle jet look at the back of the carb there's a plastic idle screw take it out right below that there is a plastic plug use a pocket or a fine flathead screwdriver and carefully pry one side at a time take it out be carful it has an o ring at one end of it there is a micro hole jet that's pluged causing it not to get fuel at idle get a fine. Sewing needle and push it thru the hole and put it back together and then you have a new machine
@daygachee17 жыл бұрын
Rudy Padilla. That did it! thanks man!
@daygachee17 жыл бұрын
fixed. . thanks Rudy
@MrDandan1707 жыл бұрын
took several videos but i found that cure also, ran like it was right out of the box again , Taryl Fixes All, Donyboy73 are great small engine channels
@nebtwins5056 жыл бұрын
The Duke I've been fighting this generator for 2 weeks I fixed in 5 seconds because of you thanks
@dannyr34336 жыл бұрын
The Duke ...I been working to get my generator working most of the day. Watching various youtube vids I finally got the thing working...and this tip put the finishing touch...thanks!
@penneyc7 жыл бұрын
The one i have has 6 hours used on it and has done that same idle since I purchased. I bought it used with 5 hours used on it. Champion Model 46555 Aug 2011. It will work and power items when needed. i.e. power went out and the truck was stuck in the garage. For the last 5 years I've only started it monthly and changes the gas just to keep it running when/if it's needed, but not for any work/load.
@idahooutdoors26957 жыл бұрын
Landlock Newfie Ok just fixed mine have the same issue it's the low idle jet look at the back of the carb there's a plastic idle screw take it out right below that there is a plastic plug use a pocket or a fine flathead screwdriver and carefully pry one side at a time take it out be carful it has an o ring at one end of it there is a micro hole jet that's pluged causing it not to get fuel at idle get a fine. Sewing needle and push it thru the hole and put it back together and then you have a new machine
@penneyc7 жыл бұрын
Thank you.
@fdc3137 жыл бұрын
Did you ever find a fix, Mine is doing the same thing even after replacing the carburetor.Thanks
@mothernaturerules7 жыл бұрын
Since it runs well enough to power things when the power goes out I haven't bothered with the repair, will eventually get around to it.
@idahooutdoors26957 жыл бұрын
fdc313 Ok just fixed mine have the same issue it's the low idle jet look at the back of the carb there's a plastic idle screw take it out right below that there is a plastic plug use a pocket or a fine flathead screwdriver and carefully pry one side at a time take it out be carful it has an o ring at one end of it there is a micro hole jet that's pluged causing it not to get fuel at idle get a fine. Sewing needle and push it thru the hole and put it back together and then you have a new machine
@fdc3137 жыл бұрын
Thank you...
@porkdogx8 жыл бұрын
looking at the gas line, it looks like old gas. drain gas tank, and clean carburator.
@mothernaturerules7 жыл бұрын
That's just the colour of the fuel line, the fuel gets changed out on a regular basis.
@JasonLedford178 жыл бұрын
My champion generator is doing this also. Have you found a solution?
@mothernaturerules7 жыл бұрын
Not yet but I've heard if an engine is surging the problem could be a blockage of some kind in the carb or after the engine is broken in the low speed jet orifice may need to be enlarged, I'll buy another stock one first before I try it.
@idahooutdoors26957 жыл бұрын
Jason Ledford Ok just fixed mine have the same issue it's the low idle jet look at the back of the carb there's a plastic idle screw take it out right below that there is a plastic plug use a pocket or a fine flathead screwdriver and carefully pry one side at a time take it out be carful it has an o ring at one end of it there is a micro hole jet that's pluged causing it not to get fuel at idle get a fine. Sewing needle and push it thru the hole and put it back together and then you have a new machine
@idahooutdoors26957 жыл бұрын
mothernaturerules Ok just fixed mine have the same issue it's the low idle jet look at the back of the carb there's a plastic idle screw take it out right below that there is a plastic plug use a pocket or a fine flathead screwdriver and carefully pry one side at a time take it out be carful it has an o ring at one end of it there is a micro hole jet that's pluged causing it not to get fuel at idle get a fine. Sewing needle and push it thru the hole and put it back together and then you have a new machine
@mothernaturerules7 жыл бұрын
Thanks Rudy, I'll check that next time I pull it apart.