Just tried this works really well however it clogs your airbrush often and when you are done your airbrush must be striped and cleaned because it leave a gunky reside. Just know that going it I will use it again
@catcadevАй бұрын
Just bought on Amazon. So excited for the diecast armour. I may add some bolts inside so that it's heavier. I love this tank. "The Russian Colossus".
@BennyCFD2 ай бұрын
Nice review.....But Airbrushes last forever if you take care of them. I have a Badger Patriot 105 that I've had for well over 20 years with the same needle and it works just like the first day I bought it.
@fredmackay78963 ай бұрын
Thanks, ordered this kit, great review buddy!
@davidharrington11334 ай бұрын
RFM kits are superbly detailed
@cplpeachy16474 ай бұрын
tractor unit in the uk
@H3llwalker7 ай бұрын
Hello, I am considering buying this kit and I came across your review. Thanks for nice unboxing. By the way, did you managed to build it? You wrote in some comment that your bench is ghosttown since 2018, is it still true?
@timothymelick70858 ай бұрын
Where the hell are you haven't seen anything from you hope you and your are in good health
@flips3000218 ай бұрын
Awesome, Egg Kit Bash, Clem. Love it! And thanks for the heads up on those clear circle templates. I have an orange one that doesn't have that many circles on it. Total rip off at like 8 quid each! I was obviously looking in the wrong places. But just ordered 2 of yours from ebay £4.78 for the two! Bargain, or what!! Wish I knew about them before. PS. And, I'm the first to comment, again! 😁
@flips3000218 ай бұрын
I've just started getting into Egg Planes. I love 'em! Yes, I'm a very late comer. Lol. Yeah. Since a lot of these Eggs don't include a pilot. I thought the same idea, too. I have a few spare Warhammer heads. I straight away thought of Ork heads. But I think I might go with Tau or Death Korp of Krieg. Failing that. I do have a F/A 18 Hornet coming soon. that does have a pilot included. So will make some copies from Blue Stuff Moulds. But I still will go for a Warhammer head or two for laughs. Excellent video, Outback. I'm surprised I'm the only one to like and comment after 9 years! It's a crime that you haven't. Until now that is... 🙂🙃 ATB. Outback. 👍
@davidavineberg39258 ай бұрын
How about this: if I ran the airbrush cleaner through my airbrush onto dried floral petals? I want to reinforce the petals, but the crevices are so little, I was hoping to use some kind of glue via airbrush instead. Thoughts?
@RudiVDS9 ай бұрын
I also use the airbrush cleaner, much cheaper and 99% the same as the extra thin glue
@John-Lee-zt9hb10 ай бұрын
Want this but bloody expensive
@bradleyjones593211 ай бұрын
so two people think it is a copy of two different airbrushes, so one or even both are probably wrong,
@mp-modelplastic Жыл бұрын
Great model kit, looks very good molds, thanks for sharing, very nice video. Greetings from Portugal😉👋
@DaveyChainZ69 Жыл бұрын
I just bought this again after one of my cleaning ladies trashed it. After starting this kit again I don't blame them for trashing it. Tons of Flash, poor molds and engineering. This is going to take some work to make this look good.
@ClemDayOutbackMiniModels Жыл бұрын
All the aftermarket pe in the kit puts me of this build. Got this at a IPMS swap meet for a steal. I’ll get to it one day. Sorry to hear the cleaning lady was careless while cleaning. Thanks for stopping by.
@DaveyChainZ69 Жыл бұрын
@@ClemDayOutbackMiniModels can I send you a pic of my build?
@ClemDayOutbackMiniModels Жыл бұрын
@@DaveyChainZ69 yeah. Send me a DM in Outback Mini Models on Facebook. There’s a link at the top of my KZbin Channel. I’d love to see it.
@chrishinton3767 Жыл бұрын
No such thing as landing gear bay doors on a Stuka. Really obvious
@timothymelick7085 Жыл бұрын
Just waiting for you to get back on doing more videos
@goforitpainting Жыл бұрын
Very cool model.
@mattmingo7694 Жыл бұрын
I’m a TOTAL tank-guy. I built a A SUPER detailed WW1 British “ Female “ tank. Very small, but a very decent kit! BUT my all-time FAVOURITE tank was the, (no racism) NAZI Panzer IV-(V=5/ I=1) MEANING 5-1= 4 Panzer “4s” with “Shirtsin”- ( plate armour ) over the tracks/ wheels are Great! BUT……it gets even BETTER. The panzer “4” CONVERSION into a “bergenpanzer” being a straight-up recovery vehicle is ABSOLUTELY the BEST version of my all time FAVOURITE tank. Will build someday.😊
@jamesunger8433 Жыл бұрын
Are plastic generic brushes impervious to the solvent? What material is impervious to melting? I don't want to use my natural brushes for this purpose.
@woody3590 Жыл бұрын
I just completed the model at 1/72 scale...extremely difficult. Had to sand and even grind a few pieces so they would fit...lol...1/48 kit looks a lot easier
@robertneedham6335 Жыл бұрын
Is this a Fendga FE130 airbrush?
@TeamCGS2005 Жыл бұрын
BD 130
@davidorr6627 Жыл бұрын
I've just started using some SMS Advance paints, mainly for small details that are too hard to mask. The initial impression was not good, but I found that the SMS Leveller was essential to allow brush painting. Straight from the bottle, the paint was pretty much dry before I could get it onto the part. It's a bit frustrating as I now have to mix a tiny amount in a milk bottle cap every time I want to use it, but the result is pretty good. I think Scott should change the labels to state that you must use leveller. The other problem is that it reacts with Tamiya acrylics and basically melts them, so be aware of that. I haven't tried airbrushing it yet as I am mostly using the SMS Premium Acrylic for that. The SMS Premium is amazing. It's nice being able to just pour it straight into the cup and start spraying. I haven't had to thin it at all. I only have an old Tamiya Spraywork airbrush, which puts out around 12 PSI. It will be upgraded to an SMS Dragon Air when I need to start doing some fine detail. Even the SMS white covers really well. I had to spray a white section over the top of some Vallejo Prussian Blue acrylic as I had forgotten to do the white section first, but it covered it beautifully with one application (several light coats). The surfacers are awesome. Such good coverage and easy to sand. And the metallics are amazing as well. Super silver gives a beautiful finish over the jet black, and cold tone hyper chrome looks fantastic.
@AAWOLFE-zc6ly Жыл бұрын
here is my recipe for thin cement, which works exactly like Tamiya.... 50% lacquer thinner + 50% Acetone this will have much less odor than cellulose thinner/ lacquer thinner on its own, and less odor than Tamiya thin cement... the acetone facilitates fast clean evaporation, with some solvent power, the lacquer thinner is the stronger solvent that melts the plastic. enjoy ;O)
@forrynz7308 Жыл бұрын
The Problem I have noticed within 5 minutes of use is that the Bush -Button pops up and goes out of place. Cheap airbrush= frustration.
@outbackalbert694 Жыл бұрын
Paint the cunce red and white like starsky and hutch
@AbstractArmorHLF Жыл бұрын
Did you end up building this kit? If so did you run into any issues?
@Thelastdon85 Жыл бұрын
Do u get the motor gun and rails and can u display them separately
@QIKRX4 Жыл бұрын
Hurry up and build it!!!! 😜
@craigandrews772 Жыл бұрын
Great review Clem, good to see you back it looks like a nice kit and thanks to Scale Auto's for the review sample.
@ishmaelsielforge2814 Жыл бұрын
How tall is he, completed?
@terrydactyl2077 Жыл бұрын
Just ordered em from gap games in brissy! Pretty cheap and even if they don’t last a long time they’ll be a good medium level brush in between my works horses and the ones that I bring out when I’m feeling special! Interested in how they feel to hold with that shape. I’m either gonna love or hate it haha
@THROTTLEPOWER Жыл бұрын
Did you finish the mixer Clem? I'm getting ready to start mine.
@ClemDayOutbackMiniModels Жыл бұрын
Haven’t even started it, too busy driving a real one.
@THROTTLEPOWER Жыл бұрын
@@ClemDayOutbackMiniModels 👍👍
@charliesnorta0666 Жыл бұрын
THUNDERDOME... I saw a comment from you from 9 years ago this morning on a THUNDERDOME mix. I went to the first 3 in Brisbane 🤙🤙🤙
@ClemDayOutbackMiniModels Жыл бұрын
I went to the ThunderDome Rave parties by ID&T. The Arena, let’s just say I was pretty cooked! Lol I grew up in Brisbane and lived in New farm at the time.
@MrMFHORN Жыл бұрын
Their Haze Grey is spot on. Much better than Mission Models
@EMTBonsai Жыл бұрын
Same as AKs pencils better to stick the tip in water get a fine paint brush wet and just touch the tip of the pencil with your brush they work amazing this way! Using them as a dry pencil usless really!
@Richard.Sanchez2 жыл бұрын
Do you clean your brush after applying the Tamiya Airbrush Cleaner? If so, what do you use to clean the brush?
@bobbobbinson18412 жыл бұрын
Did your bottle of tamaya airbrush cleaner come sealed? Mine I just twised the cap and i see liquid. is it suppost to come with some platic seal under the screw cap?!?!?
@ClemDayOutbackMiniModels2 жыл бұрын
Mine don’t come sealed. Just twist off and use.
@danielmelendez78402 жыл бұрын
How is it dryed ??
@ClemDayOutbackMiniModels2 жыл бұрын
Looks real enough
@esbenrasmussen42892 жыл бұрын
en.wikipedia.org/wiki/Denatured_alcohol This what it is called throughout the world
@outbackalbert6942 жыл бұрын
You finished this model yet lad?
@russellstone90562 жыл бұрын
The dark gray looks black. WTF, over?
@timothymelick70852 жыл бұрын
Welcome back bro
@ClemDayOutbackMiniModels2 жыл бұрын
Thanks Tim
@BrianCDK2 жыл бұрын
I use it all the time, it's just as good as the ordinary Xtra thin cement, because it's in fact 99% identical with the same two ingrediences only the ratio is a little different.... You can't compare with the quicksetting, because i contains a ekstra ingredience
@outbackalbert6942 жыл бұрын
How many likes do You need to Get a 3d printer lad
@ClemDayOutbackMiniModels2 жыл бұрын
It’s all about views.
@outbackalbert6942 жыл бұрын
@@ClemDayOutbackMiniModels I’ve watched it 3 times now
@bobbrown63892 жыл бұрын
Clem, try Auslow in Victoria for your Aussie parts, right-hand drive, mudflaps, etc, I have used them in the past many moons ago, And I contacted Kenworth Australia and explained I am a modeler and they sent pamphlets out and lots of vinyl stickers which is awesome, Cheers mate
@ClemDayOutbackMiniModels2 жыл бұрын
That’s the plan, I did say that in the original video, ended up editing all that out. Video was getting a little long.