Its a bracket from Midland USA for the ghost antenna.
@isaacmartinez-ui7fz Жыл бұрын
Where did you get your bumper set up
@miguelortiz391 Жыл бұрын
Love the Tacoma
@baine5.72 жыл бұрын
My problem is those clips not being long enough now ,dose anyone know exactly what size he is using here ?
@AndersonOverland2 жыл бұрын
I will find out for ya buddy! Will be home tomorrow. Feel free to contact me at [email protected]
@furniturerescue39492 жыл бұрын
I am looking for a video about adding fog lights to a 2014 tundra that does not have any fog lights at all. I can find tons of them about changing to a dif type/make etc. Have you any videos showing the complete and total adding of fog lights?
@lijianli2 жыл бұрын
I installed opt7 running board lights and tapped into the blue wire of the footwell light and ground to bare metal and the lights stay on but will not turn off. Do I need to tap into the tan/ brown wire for the lights to turn off?
@lijianli2 жыл бұрын
@@AndersonOverland I'm sure it's the blue one but I've seen in forums that some have taken the ground wire and attached it to the brown/ tan wire and it still doesn't make the light go off so I'm a bit stumped. I installed an inline fuse so I just took the fuse out for now until I find a solution.
@lijianli2 жыл бұрын
@@AndersonOverland yes, and it's a constant on.. doesn't go out... the footwell lights go out connected to the oem footwell lights but not the running board lights.
@lijianli2 жыл бұрын
@@AndersonOverland Mind you that the VLED footwell lights I installed both have a positive and ground that plugs into the socket. What I did with this led strip is only tap into the positive side of that and the ground I grounded to to bare metal, but then I was searching through some videos and a guy said that the footwell light positive side is a constant hot and in order to have it work and fade in and out you must have both ground and positive connected to it so I ordered some T-tap connectors so I can try it out. My VLED footwell lights work fine and fade in and out so this has got to be the solution.
@AndersonOverland2 жыл бұрын
@@lijianli Sweet man!!! Awesome! No problem!!
@christophervela54472 жыл бұрын
What are your thoughts 3years later on the water port system now? What about changing the water spout to a more water conserving option
@RougaRouKJun2 жыл бұрын
Thanks for the video. I think I'll be getting the regular version. That xl has too much setup for me. I had no idea it came with all those extra pieces to put together for that awning
@jmsaylor222 жыл бұрын
I have been trying to find someone with an FJ and these cases. How do they fit inside in the back? I am trying to figure out if I can get 4 of the 68qt in the back, 2 side by side and 2 stacked on top with the doors closed. Thanks for any help.
@AndersonOverland2 жыл бұрын
I know I could get two of these side by side, but not sure if the 68’s will. They are cheap enough to give it a shot. You could always take them back. Good luck!
@pilotreel56672 жыл бұрын
Made in CHINA!?! Can't do that.....
@obviousgiant45682 жыл бұрын
What a a man can accomplish when he uses his nogging. Just what I needed it. 🤙
@clchrislopez823 жыл бұрын
NICE
@juanjsolis92843 жыл бұрын
Thank you sir. 😁👍
@Pops_6073 жыл бұрын
Also FYI your radio will overheat in the hot summer sun… been there. I now put a white washcloth over it during the summer…
@Pops_6073 жыл бұрын
Are you still making videos? Great video….
@AndersonOverland3 жыл бұрын
Yeah! Just been very busy. About to start a bi-weekly podcast. Keep checking @andersonoverland on instagram and facebook for more info!
@tonyocruising32953 жыл бұрын
Any issues with overheating on the dash?
@anthonyshort8583 жыл бұрын
What’s the splash guards screw size? You didn’t link .. thanks
@AndersonOverland3 жыл бұрын
They are the stock press-in splash guard clips from toyota. Just search “stock tundra splash guard clips” on amazon.
@old-timeangler53563 жыл бұрын
I loved the mag-mount for the mic, where did you get them?, Nice vid, thanks for sharing.
@jaybarr33073 жыл бұрын
It's a nice install but I'm surprised that you'd want all that hardware on your dash given that the display is in the mic. The whole advantage to that model, it seems to me, is so that you can hide it away since there's nothing going on with it that needs to be seen. Figure the tablet holder is hiding most of it but it looks like it would also limit your vision out the windshield. I'm sure you considered all of that, however, so good on you for adding some coms to your vehicle.
@AndersonOverland3 жыл бұрын
Yeah understood. I actually put it up there for easier access for USB power. I think I’m gonna hide it inside my 4runner though. Just a little more out of the way.
@arfetherussian3 жыл бұрын
Not bad...
@calvinleangpun87493 жыл бұрын
How did you hardwire the radio? Looks like you went to the fuze, if that's the case which one did you wire it to? Also, were you able to fit the antenna cable through the rubber grommet in the firewall?
@AndersonOverland3 жыл бұрын
I just went to a fuse block through the firewall and put the antenna wire up the a-post and through a hole in the roof to my mount on my rack.
@jeovannymeza65923 жыл бұрын
I need this
@Lord_Stinkfoot3 жыл бұрын
I have the MXT115. Love Midland. Get the 6db antenna!
@JonnyBuzzkill3 жыл бұрын
How do you secure, or how does the tank stay in place while you are on the trail? I just ordered one for my Tacoma, to go on the bedrail, but I cant seem to find a video that shows how it is secured. Can you elaborate?
@AndersonOverland3 жыл бұрын
It has a super solid mount and there is a hole at the top for a small padlock which keeps it on.
@user-ph6ws4zc8s3 жыл бұрын
what is the name of the antenna for the radio ci bi?
@AndersonOverland3 жыл бұрын
The “Ghost Antenna” - Model MXTA25
@meme-kd2km3 жыл бұрын
@Fkakapain, did you ever find a solution? I have the same issue on my 3rd gen with the MicTuning C2 lights. I think its the bluetooth module but i cant find a harness to bypass it. I need one similar to the one Anderson shows in the video but for the MicTuning kit.
@mr.bluegrass97233 жыл бұрын
what is the price .are you able to cn radios
@AndersonOverland3 жыл бұрын
If you use this link with code: ANDERSONOVERLAND it will give you 20% off. www.avantlink.com/click.php?tt=ml&ti=902849&pw=282277
@Nocturnal1603 жыл бұрын
Forgot to mention, this works on 2nd gen Tundras too
@AndersonOverland3 жыл бұрын
Dude that switch idea is badass! I should have done that too! Right on!
@Nocturnal1603 жыл бұрын
@@AndersonOverland it worked 😎
@Nocturnal1603 жыл бұрын
Just got doing mine, turned out the same 👍 I am doing a little something extra though. Found a way to make them switchable as well. I'm about to do it tomorrow. Run an additional ground wire spliced into the splice you did for the floor light ground, and run it to the chassis somewhere (easy to find). The key is, you need to run this additional ground through a circuit breaker. Keep the circuit on, lights on demand. Break the circuit, lights will only come on with the courtesy/door ajar etc.
@UrbanSurvivor3 жыл бұрын
Hey, great video👏 How has the Plano held up since you made this? Been looking at different storage options for my 4runner.
@AndersonOverland3 жыл бұрын
They have been great!! Still have all of them! The only thing I’ve noticed is that they deform when strapped down over about 100 degrees.
@Parksandsoul3 жыл бұрын
What do you use to strap them down?
@AndersonOverland3 жыл бұрын
We use an awesome set of bungees from @theperfectbungee (www.theperfectbungee.com)
@jasonrae30493 жыл бұрын
Loved that attenna mount. I have a rhino platform. Was that a custom bracket or did you purchase that somewhere?
@AndersonOverland3 жыл бұрын
That is a bracket mount made by our partner “ICS Fabrication”. You can find them here: www.ics-fab.com
@richmurphy56473 жыл бұрын
I am looking at purchasing 2 Rigid D-XL Pro 322613, They will be going onto a bull bar on a 2020 GMC Sierra Elevation X31 . Just wondering if the power draw is too much with 12v system.. Thanks in advanced
@AndersonOverland3 жыл бұрын
@@richmurphy5647 Sounds great! Looking forward to it!
@mbills63993 жыл бұрын
Can I ask what mount for that prinsu rack you used?
@AndersonOverland3 жыл бұрын
It came with mounts.
@BrianMC-bc1lt3 жыл бұрын
Thanks for the video. Is it possible to turn these leds on while driving? I flipped the dome switch on but it only turned the dome/map lights on.
@AndersonOverland3 жыл бұрын
BrianMC 1975 I don’t think so using that circuit no.
@Nocturnal1603 жыл бұрын
There is a way to have the courtesy lights and a way to have them switchable . I'm about to do it tomorrow. Run an additional ground wire spliced into the splice you did for the floor light ground, and run it to the chassis somewhere (easy to find). The key is, you need to this additional ground through a circuit breaker. Keep the circuit on, lights on demand. Break the circuit, lights will only come on with the courtesy/door ajar etc.
@Nocturnal1603 жыл бұрын
The circuit breaker worked
@mid-westbigfootresearchers86654 жыл бұрын
company put of business now 2020
@antoniobautista83954 жыл бұрын
Nice truck!!!!!!!
@AndersonOverland4 жыл бұрын
Antonio Bautista Thx bro!
@DTOXPUNK4 жыл бұрын
question... will a tram 1185 uhf/vhf antenna be compatible with mxt115
@AndersonOverland4 жыл бұрын
robby dtox From my rep - The MXT115 is run on a FRS/GMRS frequency. Therefore it will only communicate with GMRS/FRS frequencies!
@beefomac4 жыл бұрын
Did you have to remove and replace the antenna connector to run the antenna wire?
@WillPat-zd7qq4 жыл бұрын
So is this radio like a HAM radio?
@radiohobbyist133 жыл бұрын
@@AndersonOverland I easily got my license by going to fcc.gov < First you must apply for a FRN (Federal Registration Number). You MUST give the FCC your Social Security Number as part of this process. After you apply for and receive your FRN you will also be assigned a password which will either be mailed or emailed to you separately for security purposes. After you have this you can get on the FCC WEBSITE and scroll down to ULS (Universal Licensing System). Click on that and look for APPLY FOR NEW LICENSE (or something similar). The radio service code for GMRS is ZA. Click on that, answer the questions and begin the application process. At the end you can pay with a credit card and SUBMIT. Within a few days the FCC will issue you your new license and send you a temporary 30 day link so that you can print out a hard copy for your records. Oh yeah, the license is only $7 per year for a ten year license, that's $70 total. Currently the FCC is discussing lowering the cost to only $50 for ten years. If you don't get your license and you ever do get caught it's a $10,000 fine and forfeiture of your equipment. Furthermore, if you think you might be interested in operating through a repeater someday you WILL need a valid callsign. Otherwise, you will be shunned by the legitimate users. Whenever I talk to someone, the first thing that I do is to ask for a callsign. Anyone can search the FCC license database to check for validity. Please, get your license and encourage your friends to do the same because GMRS is different from CB radio. I hope this is helpful. 👍
@AndersonOverland3 жыл бұрын
Yes its a licensed frequency. Read the comment from David above.
@Lord_Stinkfoot3 жыл бұрын
GMRS. $70 for 10 years
@ItsMRIFILM4 жыл бұрын
What magnets did you use for the mic? Any links?
@Brumintx3 жыл бұрын
Anderson Overland unable to find any site or entry for a Kevin Willis Magnetic Mic. There are lots of posts for a brand called Magnetic Mic by Innovative Products inTN. Is this the same product ?
@AndersonOverland3 жыл бұрын
@@Brumintx Magnetic Mic www.amazon.com/dp/B0153KY2GY/ref=cm_sw_r_cp_api_i_OtiIFbRGZDQTA
@eriks43354 жыл бұрын
Must be an older version. Ours came with 3 poles that go through the tent and attach to the inner frame, then one long one that goes from side to side. Nice mod on yours.
@neerajdahiya39544 жыл бұрын
Chuck that light. Tell me which camera is this. This camera can sell ,even a 1990's light bulb for a couple of hundred dollars... in seconds ...😉😎
@philboy5214 жыл бұрын
How much water can it clear out of the tank before losing pressure?
@justinmontgomery35744 жыл бұрын
Awesome idea!! Just got mine setup temporarily on my trailer and done exactly what yours did.. I'll be building a frame for mine asap
@itsmeb32334 жыл бұрын
Took a few weeks to get mine out but here a video of the bar they sent with mine kzbin.info/www/bejne/bn-wZKyAd9mIqJY
@TheMotoMadman7024 жыл бұрын
I have a new project for this weekend ! I’m so tired of the ones I have flapping around in the wind ! Thanks is for the tip !
@Fkakapain4 жыл бұрын
Great video . But I need help . I did everything pretty much the same , and my rock lights turned on, and worked great . But , they wouldn’t turn off. Tried for a couple of hours , double checked everything . The only difference, is I’m not directly connecting to the lights . The courtesy light circuit is powering the Bluetooth receiver and out the Bluetooth box are the connection for the rock lights . Here is what I bought . MICTUNING C1 8 Pods RGBW LED Rock... www.amazon.com/dp/B07XXT1YY8?ref=ppx_pop_mob_ap_share Any help is appreciated.
@AndersonOverland4 жыл бұрын
Fkakapain Well bummer man! That sucks! I’m thinking that its that bluetooth module. Did you try to hookup a multi-tester to the circuit to insure the voltage drops out and fades in? Try that first. If you get 12v fading in on courtesy circuit activation and 12v fade to 0 upon the timer timing out after the courtesy circuit is off, then you’ll know if its the bluetooth module. If it is, just wire up your rock lights direct to the courtesy circuit and you should be all good!
@Fkakapain4 жыл бұрын
Anderson Overland - I don’t know much about dc power and especially how it works on cars . But the Bluetooth module and lights works perfectly if I connect it straight to the battery. I even Tried reconnecting the lil light to the circuit with the module attached. I pig tailed the light back into the circuit . Still wouldn’t turn off . I thought maybe the lights didn’t turn off because the circuit was tampered with. Still didn’t work . So I gave up and cut the positive wire going to the Module . .leaving the small light attached, dome Lights still wouldn’t turn off . Not until I remove the positive and common From the module leaving the dome light connected . Everything went back to normal . Tomorrow I’m going to try to attached the common to the frame and instead of the common on the lil light . And only connect the positive to the courtesy/dome light positives circuit . I’ll let you know if I have any luck .
@AndersonOverland4 жыл бұрын
Fkakapain Cool! I’m sure its something simple! Let me know what you find out!
@americosupply4 жыл бұрын
Anderson Overland Did you find a fix ? I’m in the same boat except I did everything just like your video . With the exception of leaving the tiny footwell light . The crazy thing is my footwell and interior lights fade in and out , but the rock lights stay on. Any help would be greatly appreciated.
@itsmeb32334 жыл бұрын
I can tell you they heard you... I just got my xl and there are now bars included that lock in like what you did. It goes into the tent and locks on the out bar and keep it up. It also has cross bars in the middle to help with sagging